GLITZHOME 2000700034 User manual

Get social with us and discover more about our products, tips and exclusive discounts!
ASSEMBLY INSTRUCTION
ACCENT CHAIR
Please carefully unpack and identify each component before beginning assembly.
Before you begin, please refer to parts list to make sure that you have all parts. Please
take care when assembling the unit and always place the parts on a clean, soft surface.
If you require assistance with assembly or parts, please call 888-357-7263.

Assembly Instruction 1
PRE-ASSEMBLY PREPARATION
• CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this
item,please kindly return it in it's original packaging.
• WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled
and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
• CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals
for cleaning. Clean with mild soap on a soft rag. Rinse and dry thoroughly.
• MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
BACK (A) SEAT FRAME (D)SEAT (B) BACK FRAME (C)
Qty: 1 Qty: 1 Qty: 1 Qty: 1
Qty: 4 Qty: 8
ALLEN WRENCH (J)
Qty: 1Qty: 4
ALLEN BOLT (I)ALLEN BOLT (G) ALLEN BOLT (H)
M6X14MM M6X35MMM6X25MM
RIGHT SIDE FRAME (F)
Qty: 1
LEFT SIDE FRAME (E)
Qty: 1
PARTS LIST
HARDWARE LIST

PLEASE CAREFULLY UNPACK AND IDENTIFY EACH COMPONENT BEFORE BEGINNING ASSEMBLY. BEFORE YOU BEGIN, PLEASE
REFER TO PARTS LIST TO MAKE SURE THAT YOU HAVE ALL PARTS.
STEP-BY-STEP ASSEMBLY
STEP 1
Attached the Back Frame (C) to the Right Side Frame (F) by using Allen Bolt (G),
Allen Bolt (H) and Allen Wrench (J). Please 80% tighten the bolts.
Assembly Instruction
2
STEP 2
Attached the Left Side Frame (E) to the Back Frame (C) by using Allen Bolt (G),
Allen Bolt (H) and Allen Wrench (J) as shown in below diagram.
Please 80% tighten the bolts.
C
F
G
J
H
C
F
E
G
J
H

STEP 3
Attached the Seat Frame (D) to the Back Frame (C) and Side Frames (E&F) by
using Allen Bolt (G), Allen Bolt (H) and Allen Wrench (J) as shown in below
diagram.Please 80% tighten the bolts.
STEP 4
Attached the Back Cushion (A) to the Back Frame (C) by using Allen Bolt (I) and
Allen Wrench (J).Please 80% tighten the bolts.
Assembly Instruction 3
A
Please screw vertically
in this step!!
I
J
E
D
G
G
H
J
H
F
C

Assembly Instruction
4
STEP 5
Attached the Seat Cushion (B) to the Seat Frame (D) by using Allen Bolt (H) and
Allen Wrench (J) as shown in below diagram.Please 80% tighten the bolts.
STEP 6
Please 100% tighten all bolts and screws completely until the entire unit has been
assembled and set up.After initial assembly, the product may acclimate to its new
environment. Please ensure all screws are still securely tightened.
B
H
J
Please screw vertically
in this step!!



