GLITZHOME BAR STOOL User manual

Assembly Instruction
BAR STOOL

1
PARTS LIST
SEAT (A) STOOL LEG (B) USTOOL LEG (C)
Qty: 1 Qty: 1 Qty: 1
Qty: 8 Qty: 4 Qty: 1
HARDWARE LIST
( 1 set in a platic bag)
kindly Reminder: Two bags of hardware separately inside the carton.
One bag for one sool to assemble.
ALLEN KEY (G)
Qty: 1
FOOTREST (D)
ALLEN BOLT (E)
M8 x 55MM
PLASTIC CAP (F)
PRE-ASSEMBLY PREPARATION
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE:Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING:DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•

2
STEP 2
Attach the Footrest (D) to the Stool Leg (B,C) by using Allen Bolt (E) and Allen Key (G) as
shown in below diagram..
STEP 1
Cross the Stool Leg (C) to the Stool Leg (B) as shown in below diagram.
C
B
D
G E

3
STEP 3
STEP 4
Use Plastic Cap (F) to cover the holes of Allen Bolt (E) as shown in below diagram.
After initial assembly, the product may acclimate to its new environment. Please ensure all
crews are still securely tightened.
Attach the Seat (A) to the Stool Leg (B,C) by using Allen Bolt (E) and Allen Key (G) as shown
in below diagram.
F
F
G
E
A