GLITZHOME GH1010202516 User manual

Assembly Instruction
BAR STOOL

1
PRE-ASSEMBLY PREPARATION
ALLEN WRENCH (F)
Qty: 4 Qty: 1
HARDWARE LIST
( 1 set in a platic bag)
ALLEN BOLT (E)
M6 x 16MM
PARTS LIST
SEAT (A) GAS LIFT (D)BASE (B) LEG (C)
Qty: 1 Qty: 1 Qty: 1 Qty: 1
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically chec-k all fittings and re-tighten as necessary.
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•
kindly Reminder: Two bags of hardware separately inside the carton.
One bag for one sool to assemble.

2
STEP 2
Attach the Leg (C) to the Seat (A) by using Allen Bolt (E) and Allen Wrench (F) as shown in
below diagram.
STEP 1
Insert the Gas Lift (D) to the Base (B) as shown in below diagram.
D
E
C
A
E
F
Warning!
Please remove the
plastic cap before
assembly.

3
STEP 3
Insert the Gas Lift (D) to the Leg (C) as shown in below diagram.
STEP 4
A few days after initial assembly, the product may acclimate to its new environment. Please
ensure all screws are still securely tightened.