GLITZHOME GH20169 User manual

Assembly Instruction
BAR STOOL

1
PRE-ASSEMBLY PREPARATION
PARTS LIST
SEAT (A) FOOTREST (D)BASE FRAME (B) LEG (C)
Qty: 2Qty: 2 Qty: 8Qty:
2
SHORT BOLT (E) M BOLT (F) LONG BOLT (G) ALLEN WRENCH (H)
Qty: Qty: Qty: Qty: 1
HARDWARE LIST ( 1 set in a platic bag)
M6x30MM M6x20MM M6x25MM
Kindly Reminder: Two bags of hardware separately inside the carton.
One bag for one stool to assemble.
EDIUM
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING:DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•

2
H
G
B
C
D
E
H
STEP 2
STEP 1
Attach the Legs (C) to the Base Frame (B) by using Short Bolts (E) and AllenWrench (H).
Attach the Footrest (D) to the Legs (C) by using Long Bolts (G) and Allen Wrench (H).

3
STEP 3
H
F
A
Attach the Seat (A) to the base frame by using Medium Bolt (F) and Allen Wrench (H).
After initial assembly, the product may acclimate to its new environment. Please ensure all screws are
still securely tightened.