GLITZHOME BAR CART User manual

Assembly Instruction
BAR CART

1
PARTS LIST
FRONT RACK (A) BACK RACK (B) MIRRORED SHELF (C)
Qty: 1
CASTER (E)
Qty: 2
Qty: 1 Qty: 2
Qty: 8 Qty: 1 Qty: 1
HARDWARE LIST
SPANNER (H)
Qty: 2
CASTER WITH LOCKING
(D)
BOLT (F)
M6 x 25MM
ALLEN KEY (G)
PRE-ASSEMBLY PREPARATION
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•

2
STEP 2
Attach the other Mirrored Shelf (C) to the top position of Front Rack (A) and Back Rack (B)
by using Bolt (F) and Allen Key (G) as shown in below diagram.
STEP 1
Attach one Mirrored Shelf (C) to the bottom position of Front Rack (A) and Back Rack (B)
by using Bolt (F) and Allen Key (G) as shown in below diagram.
F
F
G
C
A
C
B
G

3
STEP 3
STEP 4
After initial assembly, the product may acclimate to its new environment. Please ensure all
screws are still securely tightened.
Attach the Casters (E) & (D) to both racks by using Spanner (H) as shown in below diagram.
DH
E
Kindly Reminder!
Casters with locking should be
attached to the back Rack.