GLITZHOME 2001100011 User manual

Assembly Instruction
BAR TABLE

1
PARTS LIST
CHAIR SEAT (A) CHAIR LEG (B)
Qty: 1 Qty: 4
Qty: 8 Qty: 8
HARDWARE LIST
ALLEN BOLT (E)
M6 x 16MM
ALLEN KEY (F)
PRE-ASSEMBLY PREPARATION
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING:
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•
FOOTREST (C) TABLE RING (D)
Qty: 1 Qty: 1
Qty: 1
ALLEN KEY (G)
M6 x 14MM

2
STEP 2
Attach the Table Ring (D) to the Table Legs by using Allen Bolt (F) and Allen Wrench(G).
Please tighten the bolts to 90%.
STEP 1
Attach the Legs (B) to the Table Top (A) by using Allen Bolt (E) and Allen Wrench(G).
Please tighten the bolts to 90%.

3
STEP 4
STEP 3
Attach the Footrest (C) to the legs by using Allen Bolt (F) and Allen Wrench (G).
Please tighten all bolts to 100% finally.
Kindly note the leveler is adjustable. If the floor or ground is uneven, you can adjust the leveler to assure
the stability if necessary.
A few days after initial assembly, the product may acclimate to its new enviroment. Please ensure all
bolts are still securely tightened.