GLITZHOME 2008600015 User manual

Assembly Instruction
ACCENT CHAIR

1
PRE-ASSEMBLY PREPARATION
PARTS LIST
BACK (A) SEAT FRAME (D)SEAT (B) BACK FRAME (C)
Qty: 1 Qty: 1 Qty: 1 Qty: 1
Qty: 4 Qty: 4
ALLEN WRENCH (J)
Qty: 1Qty: 8
HARDWARE LIST
SCREW (I)ALLEN BOLT (G) ALLEN BOLT (H)
Qty: 1
SCREW DRIVER (K)
M6X14MM M4X40MMM6X25MM
RIGHT SIDE FRAME (F)
Qty: 1
LEFT SIDE FRAME (E)
Qty: 1
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•

2
C
E
G
C
E
J
STEP 2
Attached the Right Side Frame (F) to the Back Frame (C) by using Allen Bolt (G),Allen Bolt (H)
and Allen Wrench (J) as shown in below diagram.
STEP 1
Attached the Back Frame (C) to the Left Side Frame (E) by using Allen Bolt (G), Allen Bolt (H)
and Allen Wrench (J).
F
H
G
J
H

3
STEP 3
Attached the Seat Frame (D) to the Back Frame (C) and Side Frames (E&F) by using
Allen Bolt (G), Allen Bolt (H) and Allen Wrench (J) as shown in below diagram.
STEP 4
Attached the Back Cushion (A) to the Back Frame (C) by using Screw (I) and Screw
Driver (K).
F
A
D
G
G
H
J
H
E
C
Please screw vertically
in this step!!
I
K

4
STEP 6
After initial assembly, the product may acclimate to its new environment. Please ensure
all screws are still securely tightened.
STEP 5
B
Attached the Seat Cushion (B) to the Seat Frame (D) by using Screw (I) and Screw Driver (K)
as shown in below diagram.
IK
Please screw vertically
in this step!!