Govee H6119 User manual

,...
·~ovee
User Manual
Model: H6119
RGBIC Car LED Strip Lights

At a Glance
LED Strip Lights
Control Box
Car Cigarette Lighter
RF remote
User Manual
Specifications
Length
Lighting Color
Power Supply
Voltage
Control Method
Working Temperature
4
1
1
1
1
4 x 30cm / 4 x 0.98ft
RGBIC
Car Cigarette Lighter
12VDC
Govee Home App,RF Remote
-10°C -45°C (14°F-113°F)
01

Installing Your Strip Lights
0 Preparation Before Installing
a. Unpackthe box and check all items listed in the packing list.
b. Power on the strip lights and check whether they lightup.
8 Installing Steps
a. Wipe the installing surface to make sure it's clean and
smooth.
b. Install the cigarette lighterand control box in the central
console.
c. Peel off the protective film and stick the strip lights as
indicated in the picture.
--
~ Screw Fixing Hole
~-Steering wheel / Cigarette lighter
--~
Front
Seat
02
Back
seat

d. Firmly press the strip from end to end and reinforce
ends of the strip with zip ties and screws.
e.Insert the cigarette lighter into the socket and press the
button on it. The button will light on, indicating the strip
light is powered on.
Controll~ng with the Control Box
..._
@ _.._- On/Off
@ ...J-- Color button
Music Mode/Brightness Adjusting
Button Function
On/Off Shortpress toturn on/off the strip light.
Color button Short press to switch the color.
Music Mode/ Short press to switch to music mode;
Brightness Adjusting Long press to adjust the brightness
03

Controlling by RF remote control
Button
A
B
C
D
0
0 0
0 0 0
C)
0
0 0
0 0 0
Function
Short press: Turn. ON/OFF strip light
Shortpress: Adjust brightness
Shortpress: Switch color cyclically
Short press: Switch to music mode
Downloading the Govee Home App
Download the Govee Home app from App Store (iOS devices) or
Google Play (Android devices).
04

GET IT ON
~• (~t)t)3lc pl(_1y
Connecting the Strip Lights tothe App
0 Turn on Bluetooth in your mobile phone.
8 Open Govee Home app and tap "+" icon in the top right corner.
0 Select "H6119" in the device list.
Troubleshooting
0 The LED strip doesn't turn on
a. Please make sure the cigarette lighter is poweron.
b. Please make sure the cigarette lighter is well connected
with power plug.
c. There is a button on the cigarette lighter. Please make
sure it is pressed, and the LED strip will be energized if
button is red.
05

8 The LED strip stops working after using for a period
a. Please make sure the cigarette lighter is well connected
with power plug.
b. Please open the APP to make sure the strip light is
switched on.
c. Open the cover of the cigarette lighterand take out the
fuse to check whether it's burned.
e The adhesive is not sticky
a. Please clean and dry the surface of the objectwhere the
strip needs to be installed.
b. Please put the LED strip on the clean surface, and press
it firmly for 15 seconds to make sure it is sticky.
c. Moreover, please screw the LED strip to prevent it falling
off.
8 Cannot connect to APP
a. Please turn on the Bluetooth of your cellphone.
b. Please make sure it is connected to the Bluetooth
according to the APP instructions.
c. If the phone is not compatible, please replace the phone
and reconnect the LED strip.
d. Please unplugthe adapter for nearly 10minutes and
replug it in to retry.
e. Please make sure the device is in the Bluetooth range of
your cellphone.
06

f. Please make sure there is no obstacles between product
and your cellphone.
e The control box doesn't work
a. Please unplug the cigarette lighter and then plug it back.
b. Please control the strip light through app and check if
you can adjust color and brightness.
07

FCC Statement
This device complies with Part 15 of the FCC Rules .
Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the partyresponsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energyand, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio commu .nications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/lV technician
for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL
60406-2448
Email: [email protected]
Contact information: https://www.govee.com/support
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks byShenzhen lntellirocks Tech. Co.,Ltd. is under
license.
Govee is a trademark of Shenzhen lntellirocksTech Co., Ltd.
Copyright ©2021 Shenzhen lntellirocksTech Co., Ltd. All
Rights Reserved.