Govee H6199 User manual

Model: H6199
User Manual
Govee RGBIC TV Backlight
(For 55-65 inch TVs)
2022.01.13
深圳市智岩科技有限公司
受控文件

Read and follow all the safety instructions:
●
●
●
●
●
●
LED Strip Lights
Adapter
Control Box
Camera
User Manual
Service Card
1
1
1
1
1
1
Safety Instructions
01
Be cautious of static electricity during installation and usage. Keep the product away
from sharp objects or strong corrosive chemicals.
When bending the strip lights during installation, avoid folding the LED components as it
may affect the product’s lifespan.
Remove nails, metal, or other conductive objects from the installation surface before
attaching the strip lights, as it may cause short-circuiting.
Do not install the strip lights near any heat sources.
Do not allow children to install the strip lights alone.
Avoid installing the strip lights near potentially dangerous sources (e.g., candles,
liquid-filled objects).
Thank you for choosing the Govee TV Backlight. These TV strip lights provide an immersive
viewing experience. The camera, positioned in the center of your TV or PC screen, can
intelligently capture the colors displayed and automatically apply them to your lights. This
significantly enriches your gaming worlds or movie nights.
Introduction
What You Get
English

02
Indicator Light a. A blue light indicates the camera is powered on.
b. A dim light indicates the camera is not powered on or might be broken.
Camera
Indicator Light
3M Adhesive
At a Glance
On/Off Button
Color Button
Music/Dimmer
Button
Indicator Light
Press to turn On/Off.
Press to adjust the color.
Press to enter Music mode.
Long press to adjust the brightness.
a. A red light indicates the device is not connected to the network.
b. A blue light indicates the device has successfully connected to the network.
c. No light indicates the device is not powered on or malfunctioning.
Control Box
On/Off Button
Color Button
Music/Dimmer Button
Indicator Light

03
Preparation Before Installing:
a. Unbox the strip lights and check all items listed in the packing list.
b. Power on the strip lights and check whether they light up.
❶
Installing Steps:
a. Wipe the installation surface to ensure it is dry and clean.
❷
Installing Your Device
b. Stick the strip lights to the back of the TV. Press them firmly and then reinforce them
with the provided clips.

04
c. Position the camera to the top-center of the TV.
e.
f.
Ensure that the control box is in a proper position near your TV.
Power on the strip lights and try connecting them with the Govee Home app.
d. Insert the cable of the strip lights and the camera into the control box. (USB/Type-C/DC)
USB
Type-C
DC

05
Pairing Your Device with the Govee Home App
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
What you need:
Mount the camera to the center of the screen.
❶
Calibrating the Camera with the Govee Home App
Download the Govee Home app from the App Store (iOS devices) or Google Play
(Android devices).
Turn on the Bluetooth in your smartphone.
Open the app, tap the “+” icon in the top right corner and search “H6199”.
Tap the device icon and follow the onscreen instructions to complete pairing.
❶
❷
❸
❹
Govee Home

Stick the form stickers to the 7 calibration points on the screen.
❷
06
Drag the seven calibration points to the position points.a.
Tips：
Camera
Open the Govee Home app, go to the Settings page, then tap “Calibration”. Begin
calibration by following the instructions.
❸
Position Points
The picture will distort under the fish-eye camera. Ensure the calibration points are
chosen correctly and the calibration lines do not overlap or cross each other.
b.

Input
Power Supply
Length
Lighting Color
Control Method
100V-240V
12V Adapter
2.3ft (left/right) +3.94ft (top/bottom)
RGBIC
App (BLE + Wi-Fi)
Specifications
07
❶
❷
❸
Open the app, then tap the device icon to enter detail page.
Tap the setting icon in the top right corner.
Select Using Guidance and follow on-screen instructions to control the device using your
voice.
Controlling the Device with Your Voice

08
❹Calibration and picture upload failure
With your smartphone, check whether the Wi-Fi connection is stable.
❷Calibration failed.
Calibrate the strip lights again.
Ensure no other strong lights are affecting the camera.
Calibration points must be chosen correctly. For example, the top calibration point on
your TV cannot be dragged to the bottom. The calibration lines cannot overlap or cross
each other.
Calibration can only begin after the strip lights are successfully connected to Wi-Fi.
❺Wi-Fi connection failure
Do not skip the Wi-Fi connecting step during setup. Ensure you input the correct Wi-Fi
name and password according to the app instructions.
5GHz Wi-Fi is not supported. Connect the strip lights to a 2.4G Wi-Fi band then reboot
your router.
With your smartphone, check whether the Wi-Fi connection is stable.
The strip lights are not compatible with the Wi-Fi name or password. Please change the
Wi-Fi name and password.
The strip lights are not compatible with your router. Please try to connect your strip
lights to a smartphone hotspot.
❸The provided adhesives don’t stick well.
Wipe the installation surface to ensure it is dry and clean.
When attaching the strip lights, ensure you press down firmly.
Reinforce the strip lights with the provided clips or other strong adhesives.
❶The strip lights do not light up.
Check all wired connections. Unplug and Re-plug the power adapter and the DC port
to ensure the control box powers on correctly. The strip lights will light up 10s after
being powered on.
Check the wired connections for the strip lights and the camera. The strip lights should
be plugged into the LED port and the camera should be plugged into the CAM port.
Ensure the strip lights are plugged into the LED port before they are powered on.
If you unplugged the strip lights, reboot the power adapter after the lights are working
correctly.
Troubleshooting

09
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]
Official Website: www.govee.com
@Govee.smarthome@Goveeofficial
@govee.official
@govee_official
@Govee