Grandview GPCM-J Series User manual

Instruction manual
Projector Ceiling Mount
Model: GPCM - J100
Cautious
For safety, the minimum weight of ceiling must be 40KG;
The maximum loads of installation bracket is 15Kg.
Warning
Attention Please do not incline the projector extremely.
Please do not take apart the accessories of projector ceiling mount.
Please do
not take apart

74mm
组成 部分 及配 件
Maximum scope for installation: 370mm diameter
Minimum scope for installation: 140mm diameter
Shortest height of the mount is 74mm
Front view
1、Adjusted the installation arms to match with the
projector mounting holes.Projecter centered with
the angle adjuster.
2、Angle adjuster align with the projection direction.
3、The Installation arms are extendable to match with
the projector mounting.
4、Extra hole on the mount to attach the installation
arm in case for a projector with only 3-holes mounting.
GPCM-J100
10Kg
Φ5 expanded plastic (4pcs) mounting rubber (4pcs)
Φ5 Cross Tapping screw (4pcs) M5*30 Philips Screw (4pcs)
M4*20 Philips Screw (4pcs) User manual (1pc)
M5*20 Philips Screw (4pcs) Allen key (1pc)
M4*30 Philips Screw (4pcs)
Projector installation
Installation
Angle Adjustment
vertical tilt (UP 1 , DOWN 8 ) ° °
horizontal tilt 4± °
一、 Horizontal tilt
1、Use the allen key to adjust the 2 screws
on the Angle adjuster for ± 3°.
2、Use the allen key to adjust the screws
in the bottom for ± 4°
二、Vertical tilt
Use the allen key to adjust the left and right
2 screws, the angle adjuster can have a tilt
for (UP 1° , DOWN 8°)
B.Fix the projector to the (3) Installation arms
C.Combine the installation arms part to the ceiling
fixing parts.
D.Installion completed.
Adjust the projection angle.
A.Separate the (1) ceiling cover and the(2) Angle
Adjuster.Install the ceiling cover to the ceiling.Then,
Put in the(4) Decoration cover.
① J100 ceiling cover
② Angle adjuster
③ Installation arms
④ Decoration cover
Scope
Accessories:
Spec Unit: mm
Model:
Max Load:
Fig.4 Fig.5
Fig.6
horizontal tilt 3°±