Great Little Trading Paddington Midsleeper User manual

1
Paddington Midsleeper
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
09/02/2017
V4
easy - medium - hard
Assembly Difculty
two-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
www.gltc.co.ukwww.gltc.co.uk

2
Safety Warnings:
• IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE
REFERENCE.
• This bed conforms to BS EN 747:2012 Parts1&2 +A1:2015
• WARNING! Not suitable for children under 6 years due to the risk of
injury from falls.
• This bed is suitable for mattress size 190cmL x 90cmW x 15cmD
• Adult assembly required.
• This product is heavy, we recommend that you build it where you are
planning to use it.
• Assemble and use on a at and level surface.
• Do not use power tools in the construction of this product.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Do not place this bed near heat sources, windows or other furniture.
• WARNING! Children can become trapped between the bed and the
wall.To avoid risk of serious injury the distance between the top safety
barrier and the wall shall not exceed 75mm nor shall be more than
230mm.
• WARNING! Children can strangle in items such as ropes, strings,
cords, harnesses and belts attached or hung from a bunk bed, mid-
sleeper or high bed.
• Check xtures and ttings regularly and tighten as necessary.
• Do not use this bed if any part becomes broken, torn or missing.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Please ensure the room in which this bed is to be used is well
ventilated or aired regularly in order to keep humidity low in and
around the bed.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [email protected]
Thank you

3
Component Check List
A
E
G
B
H
2x RH Leg Front Panels 2x LH Leg Front Panels
2x Headboard Rails
2x Side Rails 1x Rear Guard Rail
2x Headboards
F
C
2x RH Leg Side Panels 2x LH Leg Side Panels
D
I
M
J
1x LH Ladder Side 1x RH Ladder Side
2x Tread Panels 1x Slat Set
N
K
2x Front Guard Rails 2x Rail Support Braces
L
NOTE:
Please note that the panels are not labelled.
Please identify the panels before you start assembling the bed.

4
#10
32x Cover Caps
U3
Component Check List
#9
28x Screws
35mmL
#2
#4
#1
#3
#5
28x Wooden Dowels
35mmL
D7
8x Bolts
40mmL
C26
8x Connecting Bolts
80mmL
C18
20x Wooden Dowels
40mmL
D11
24x Bolts
50mmL
C27
10x Barrel Nuts
D25
#6
#7 #8
2x Connecting Bolts
65mmL
12x Screws
30mmL
S5
Phillips Head Screwdriver
You will need (not supplied)
Hammer
You will need (not supplied)
S6
#11
1x Allen Key
K3

5
STEP 1:
Take the 2x headboards F, 2x headboard rails E, 2x RH leg front panels C and 2x LH
leg front panels D and insert the shorter wooden dowels (#1) into the edges of the
panels, as shown.
Lightly tap the dowels with a hammer for this step.
STEP 2:
Build the two RH legs by securing one of the RH leg side panels A to one of the RH
leg front panels C using the bolts (#4). Repeat for the second RH leg.
Now build the two LH legs by
securing one of the LH leg side
panels B to one of the RH leg
front panels D using the of the
two bolts (#4). Repeat for the
second LH leg.
Tighten fully with the Allen key.
D
Hardware for Step 1:
28x #1 Wooden Dowels 35mmL
Hardware for Step 2:
12x #4 Bolts
A
C
F
E
#1
#1
#1 #1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#4
#4
#4
#4
#4
#4
B
C
D
2x
2x
2x
2x

6
STEP 3:
Assemble the bed end by locating one of the prepared headboards and headboard
rails into the LH assembled leg. Once all 4 panels are in place locate the RH
assembled leg into place.
Repeat this for the second bed end.
E
STEP 4:
Secure these panels to the assembled legs using the shorter screws (#8).
Repeat this for the second bed end.
#8
Hardware for Step 4:
12x #8 Screws 30mmL
F
E
F
#8
#8
#8
#8
#8
#8

7
IMPORTANT:
Two people are required from this point forward.
Hardware for Step 6:
4x #6 Barrel Nuts
STEP 5:
Take the 2x front guard rails I, 1x rear guard rail H and 2x side rails G and insert the
longer wooden dowels (#2) as shown.
Hardware for Step 5:
20x #2 Wooden Dowels 40mmL
H
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
I
G
H
G
G
4x #5 Connecting Bolts
#5
#5
#5
#5
#6
#6
#6
#6
STEP 6:
Attach the rear side rail G and guard rail H to one of
the assembled bed ends using the connecting bolts and
barrel nuts as shown. Repeat this for the second bed
end.
Leave the bolts nger tight to allow for the next step.
#2
#2
#2
#2
I
#2
#2
#2
#2
G

8
Hardware for Step 7:
4x #6 Barrel Nuts
I
I
G
4x #5 Connecting Bolts
#5
#5
#5
#5
#6
#6
STEP 7:
Attach the front side rail G and 2x front guard rails I to
the assembled bed ends using the connecting bolts and
barrel nuts as shown.
Tighten the bolts from step 6 and step 7 using the
Allen key provided.
#62x
STEP 8:
Locate the RH and LH ladder sides onto the front guard rails.
K
L

9
STEP 9:
Secure the ladder sides to the front guard rails using
the shorter connecting bolts (#7) and barrel nuts (#6)
as shown.
Fix the 2x rail support braces J to the back guard rail
and frame rail using the shorter bolts (#3).
Tighten the bolts using the Allen key provided.
Hardware for Step 9:
2x #7 Connecting Bolts
8x #3 Bolts
2x #6 Barrel Nuts
J
J
#7
#7
#6
#6
#3
#3
#34x
#32x
#32x
2x
2x
STEP 10:
Secure the 2x tread panels M to the ladder sides with the longer bolts (#4).
Tighten the bolts using the Allen key provided.
M
Hardware for Step 10:
#4
M
#4
#42x
#42x
#42x
#42x
8x #4 Bolts

10
STEP 11:
Secure the ladder to the frame rails with the longer bolts (#4).
Tighten the bolts using the Allen key provided.
Hardware for Step 11:
4x #4 Bolts
#42x
#42x
#4
#4
STEP 12:
Secure the slat set to the rails ensuring the ribbon is facing
upwards and that every slat is xed at both ends with the
longer screws (#9). #928x
#10
#108x
#106x
Hardware for Step 12:
28x #9 Screws 35mmL
28x #10 Cover Caps
#10
#10
#10
#10
#10
#10
#104x #104x
OPTIONAL:
The cover caps (#10) can be used to conceal the
shorter and longer bolt heads. Ensure they are pushed
rmly into place if used.
Do not use the caps if children under 3 years have
access to the bed as they could become a choking
hazard. Copyright© 2016 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.