Great Little Trading L5290 User manual

1
Crompton Low Bookcase, White
19/10/2021
V1
one-person job
Assembly Difculty
easy - medium - hard
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
L5290

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a choking
hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• To avoid possible injury from tipping, DO NOT allow children to climb
on the product.
• WARNING! FURNITURE TIPPING RISK. Serious or fatal crushing
injuries can occur from furniture tipping over. Ensure you secure this
furniture product to the wall before you use it, using the kit provided.
• If you have not received an anti-tip kit with your product please contact
Customer services.
• Wall xings not included. Please use appropriate xings that are suitable
for the wall type. If in doubt, please seek professional advice.
• Check all xtures and ttings regularly and tighten as necessary.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
are properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
E F
G
1x Side Panel 1x Side Panel
1x Shelf Panel
1x Footed Base Panel
#1 #2
#3 #4
#5 #6
#7 #8
8x Cam Dowels 16x Wooden Dowels
You will need
(not supplied)
Philips Head Screwdriver
1x Top Panel
2x Batons
2x Back Panels
Component Check List Hardware Check List
8x Cam Locks 4x Crosshead Bolts
4x Barrel Nuts 2x Wood Screws
25mmL
18x Screws
14mmL
1x Anti-Tip Kit

4
Hardware for Step 1: Hardware for Step 2:
4x #1 Cam Dowels
2x #3 Cam Locks
2x #2 Wooden Dowels
#1
#1
#1
#1
A
B
#1
C
#2
#2
#2
#3
#3
#3
A
STEP 1:
Working on a protective surface like a carpet
or a rug, position both side panels (A) & (B)
with drill holes facing up.
Using a Philips screwdriver, insert 2x cam
dowels (#1) into the holes as shown on
BOTH panels.
Base
STEP 2 :
Position side panel (A) as shown with the recessed long edge with drill
holes facing up.
Insert 2x wooden dowels (#2) into the holes next to the cam dowels and
join the shelf panel (C) to the side panel as shown.
Please note the holes on the underside of shelf (C) should be facing down
as shown, towards the smaller drill holes on the side panel and the small
pilot holes on the long edge of the panel to facing up.
To secure the shelf in position, insert 2x cam locks (#3) into the large drill
holes on the shelf and turn them clockwise to lock.
BASE
Using Cam Locks:
When inserting into the panel, ensure
that each cam lock’s arrow is pointing
towards the drill hole on the side
edge of the panel & the dowel that it
will be receiving.
When the panels are in the
connected position, using a
screwdriver, turn the cam lock in
a clockwise direction to lock and
secure.
Note: You will be
building this unit with
the back facing up.
BASE
TOP
*Larger drill holes
on side panels
*Smaller drill
holes on side
panels
TOP

5
Hardware for Step 4:
4x #1 Cam Dowels
Hardware for Step 3:
2x #3 Cam Locks
2x #2 Wooden Dowels
C
A
B#3
#3#2 #3
#1
#2
#2
#1
#1
#1
#1
D
STEP 3:
Position the remaining side panel B with the
recessed long edge with drill holes facing up
and attach to shelf panel (C) as in step 2, using
2x wooden dowels (#2) and 2x cam locks
(#3).
Ensure the cam locks are tightened securely
by turning clockwise.
TOP
BASE
STEP 4:
Prepare the top panel (D) by
inserting 4x cam dowels (#1) into
the holes in the corners as shown.

6
Hardware for Step 5:
4x #2 Wooden Dowels
4x #3 Cam Locks
Hardware for Step 6:
#3
#3
#3
#3
A
#2
#2
#3
#2
#2
C
B
D
C
BE
A
#5
#2
#5
#2
#4
#4
#2
#5
#4
#4
#2
#5
#5
#4
4x #5 Barrel Nuts
4x #4 Crosshead Bolts
#2
D
STEP 5:
Insert 4x wooden dowels (#2) into the inner
holes on the top panel (D) then position onto the
unit with the recessed edge facing up.
Once in place, insert 4x cam locks (#3) into the
larger holes on the side panels and turn clockwise
to secure the top panel in place.
TOP
BASE
Position the base panel (E) with the recessed
edge facing up and push into position. Fix in
place using 4x crosshead bolts (#4) applied
through the base into the side panels.
Fully tighten bolts using a Philips screwdriver
4x #2 Wooden Dowels
STEP 6:
Attach the base panel (E) to the unit.
Insert 4x wooden dowels (#2) to the outer
holes in the ends of the side panels as shown.
Insert 4x barrel nuts (#5) into the holes on
the inside of the side panels, ensuring the hole
in the nut is facing towards the base.

7
Hardware for Step 8:
Hardware for Step 7:
4x #2 Wooden Dowels
#2
#2 #6
#2
#2
#6
E
F
F
2x #6 Wood Screws
18x #7 Screws (14mm)
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
BE
G
G
STEP 7:
Attach the 2x batons (F) on each side of the
base panel.
Insert 2x wooden dowels (#2) into the holes
next to the feet. Push the baton into position
and x in place with 1x screw (#6) using a
phillips screwdriver.
Repeat on remaining side
STEP 8:
Attach the back panels.
Position the top and bottom back panels (G) on the unit with the tongue
and groove facing the inside of the unit. Check the alignment of the holes in
the panels with those on the unit. Note the half-moon holes on both panels
should meet in the middle as the join together.
Using your Philips screwdriver, x the panels in place with x18 screws (#7).
Please note that the 2x pilot holes indicated at the top of the unit are to
attach anti-tip kit included separately with this item.
Please note:
These arrows indicate the drill
holes used for the anti-tip kit
brackets & hardware included
in with your unit. Do not use
hardware #7 in these holes.

8
Copyright© 2022 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 9:
#8 Anti-tip Kit
Your bookcase is now ready to use.
#8
STEP 9:
We strongly recommend that you attach this unit to
the wall to prevent injury from the unit tipping over.
Attach the 2x anti-tip brackets to your unit using the
hardware and instructions included in the kit (#8)
provided with your unit. Please use the screw holes
shown.
Your unit is now ready to be
attached to the wall using
hardware that is suitable for the
walls in your home.