Great Little Trading L4924 User manual

1
Star Bright Shelf with Hooks, Landscape
04/12/2019
V1
easy - medium - hard
Assembly Difculty
one-person job
L4924
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult assembly required.
• In an unassembled state product contains small parts, which may pose
a choking hazard, not suitable for children under 3 years.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• Check the item regularly for signs of damage, which may make the
product unsafe.
• Maximum weight load is 10kg. Do not overload. We do not
recommend that you place heavy items above children’s beds or above
head height as products may fall and cause injury.
• Please retain these instructions for future reference.
• Wall xings not included. Please use appropriate xings that are
suitable for the wall type. If in doubt, please seek professional advice.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
Hardware for Step 1:
4x #1 Screws
4x #2 Wooden Hooks
Hardware for Step 2:
1x #3 Cam Dowel
STEP 2:
Insert 1x cam dowel (#3) into panel D in the pilot hole provided.
STEP 1:
Attach x4 wooden hooks (#2) to Panel D using x4 screws (#1).
A
1x
B
C
1x
D
D
D
You will need
(not supplied)
Philips Head Screwdriver
1x
4x Wooden Hooks
(20x50mm)
#1 #2
#2
#3
#3
#4
4x Screws (3.5x25mm)
13x Cam Dowels
(0.8x35mm)
13x Cam Locks
(0.15x9mm)
1x 1x
E
#1

4Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 3:
Insert x1 cam lock (#4) into panel E.
Attach panel D to panel E. Lock cam lock by screwing
clock wise to secure panels together.
STEP 5:
Attach panels A and B to panels C, D and E using 12x
cam locks (#4).
STEP 4:
Insert 12x cam dowel (#3) into panels A and B in the
pilot holes provided.
Hardware for Step 3:
Hardware for Step 4:
Hardware for Step 5:
1x #4 Cam Locks
12x #3 Cam dowel
12x #4 Cam Locks
Note: Ensure cam locks
are fully tightened.
D
E
B
B
A
C
D
E
#4
A
#3
Your product is now ready to use
4x Wall Fixings (NOT INCLUDED)
We suggest using M4*40mm at head
screws or screws of a similar size. Please
ensure to use the appropriate wall xing
for your wall type. If in doubt, please seek,
professional advice.