Great Little Trading This Way That Way Shelf User manual

1
This Way That Way Shelf
25/08/2020
V2
easy - medium - hard
Assembly Difculty
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• CAUTION Adult assembly required.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury. Do not use this item if any components are
missing or damaged.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood
• Wall xings not included. Please use appropriate xings that are
suitable for the wall type. If in doubt, please seek professional advice.
• Max Shelf Loading: 25 Kgs
• Made in China.
• Please retain this information for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A B
#1 #2
#3
2x Shelf Supports (Left and Right) 1x Shelf
4x Screws
12mmL
4x Screws
30mmL
2x Wall Fixings
You will need
(not supplied)
Phillips Head Screwdriver
Hardware for Step 1:
x4 #1 12mmL screws
x2 #3 key hole xings
STEP 1:
Firstly, decide which way up you would like to hang your
shelf.
Then attach the key hole xings (#3) to the shelf supports
(A) using 2x 12mm screws (#1) as shown below.
#1
#1
#1
#1
#3 #3
A A
#1
#1
#1 #1
#3 #3
AA
OR
Attach the key hole xings this way
around to install the shelf this way up.
Attach the key hole xings this way
around to install the shelf this way up.
Wall screws will be
hung from the smaller
hole on the wall xing

4
STEP 2:
Position the shelf supports (A) in line with the holes on the shelf panel (B). Secure
with 4x 30mm screws (#2) as shown.
Copyright© 2018 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 2:
x4 #2 30mmL screws
#2
#2
#2
#2
A
A
B
screws or screws of a similar size. Please
for your wall type. If in doubt, please seek,
professional advice.