Great Little Trading L4939 User manual

1
Under Bed Truckle Drawer (UK Single size)
L4939
easy - medium - hard Two-person job
A few important pointers before you start:
•Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•Make sure you have the right tools.Allen keys are provided if required,
you need at the beginning of the instructions.
•It’s a good idea to build the unit in the room where you are going to be
using it to avoid the need to move it after it’s been assembled.
•Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
24/12/2019
V2

2
Safety Warnings:
• Please read these instructions carefully before assembly.
• Adult assembly is required.
• WARNING! Unassembled product contains small parts which may
pose a choking hazard.
• Children should be kept away from the product due to possible risk of
injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over tightening and consequently splitting of the wood
• Check all xtures and ttings regularly and tighten as necessary.
• Max weight 80kg. Do not overload.
• Do not use is any part of the drawer is damaged.
• Please retain for future reference.
Please note:
This product can be used as either a storage drawer or a sleepover bed-
the mattress size required:
90cm W x 175cm L x 12cm H
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
C
D
Hardware Check List Component Check List
E
#1 #2
#3 #4
#5 #6
#7 #8
#9 #10
F
G
You will need
(not supplied)
Philips Head Screwdriver
A
B
6x Wooden Dowel 6x Threaded Rod
8x Cam Dowel 8x Cam Lock
6x Demi-Lune Fixing 6x Nut
1x Spanner
5x Screw
22mm
16x Screw
14mm 4x Wheels
2x Front/Back Panel
2x Side Panels
2x Outer Base Panels
1x Central Base Panel
2x Side Support Struts
2x Mid Base Panels
1x Central Support Strut

4
STEP 2:
Take both side panels (B) and connect to one of the front/back panels (A) as
shown - ensure the grooves align on all panels.
Insert 2x cam locks (#4) into the large holes on BOTH side panels (B). Turn cam
locks clockwise to lock and secure.
STEP 1:
Prepare BOTH front/back panels (A).
Insert 4x Cam dowels (#3) into the holes on the short edges of one panel A.
Insert 3x threaded inserts (#2) into the LH holes (when facing) along the long
edge as shown. Insert 3x wooden dowels (#1) into the remaining holes.
Repeat for 2nd panel A.
Hardware for Step 1:
Hardware for Step 2:
6x #2 Threaded Rod
6x #1Wooden Dowel
8x #3 Cam Dowel 4x #4 Cam Lock
#4
A
#1 #1
#1
#2#2#2
#3
#3#3
#3
B
B
A
#4
#4
#4
#4
Using cam locks:
When inserting into the panel, ensure that
each cam lock’s arrow is pointing towards
the drill hole on the side edge of the panel
& the dowel that it will be receiving.
When the panels are in the connected
position, using a screwdriver, turn the cam
lock in a clockwise direction to lock and
secure.

5
STEP 3:
With the help of a second person, carefully position the drawer frame onto its
front as shown.
Take central support strut (F) and position with the small drill holes facing
into the drawer and large drill holes facing outwards, push over the hardware
showing on panel A. The threaded rod will be visible in the large hole.
Insert a demi-lune xing (#5) into the hole and over the end of the threaded
rod and follow a nut (#6). Tighten the nut with the spanner provided (#10).
Repeat this step with the 2x side support struts (G).
Hardware for Step 3:
3x #6 Nut
1x #10 Spanner
3x #5 Demi-Lune Fixing
#6
#5
G F G
#6
#5
#6
#5
#6
#5
A
STEP 4:
Prepare BOTH outer base panels (C).
Attach 2x wheels (#8) using 8x shorter screws (#7) to EACH panel.
Hardware for Step 4:
4x #8 Wheels
C
#8 #8
#7 #7#7 #7
#7 #7
#7 #7
16x #7 Screw14mm

6
C
STEP 5:
With the help of a second person supporting the panels, reposition the
The base panels now need to be slid into the grooves of the frame.
PLEASE NOTE the base panels must be inserted into position in the correct
1st: 1x Panel C (with the wheels down) - so it sits in the
groove.
2nd: 1 x Panel D - make sure the central drill hole is facing UP.
3rd: 1 x Panel E - make sure the central drill hole is facing UP.
4th: 1 x Panel D - make sure the central drill hole is facing UP.
5th: 1x Panel C (with the wheels down) -
The panels should all slot into each other like tongue & groove.
STEP 6:
Take the remaining front/back panel A and push into the frame, ensuring the
hardware is received into the base struts and side panels.
Insert 2x cam locks (#4) into the drill holes of BOTH side panels B and turn
clockwise to secure.
Fix the base slats with 5x longer screws (#9)
Hardware for Step 6:
4x #4 Cam Lock
A
A
B
#4
#4
#4
#4
#9
#9
#9
#9
#9
A
B
B
C
C
E
D
D
5x #9 Screw 22mm

7
STEP 7:
With the help of a second person, carefully position the drawer with it’s back
on the oor as shown.
Finally, x panel A to the support struts underneath the drawer using the
remaining large drill holes.
Insert a demi-lune xing (#5) over the threaded rod rst, followed by a nut
(#6) and tighten with the spanner provided.
Repeat for remaining struts.
Hardware for Step 7:
3x #6 Nut 3x #5 Demi-Lune Fixing
1x #10 Spanner
#5
#6
G GF
#6#6
#6
#5
#5
#5
Your under bed truckle drawer is now ready to use.
It can be used for storage or as a spare bed. Please use a mattress
sized 175L x 90W x 12D (cm) if being used as a spare bed.
Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
A