Great Little Trading Animal Chair Deer L5018 User manual

1
Animal Chair, Deer
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
L5018
15/06/2020
V1
easy - medium - hard
Assembly Difculty
one-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• This product is suitable for children in the age range of 2 to 5 years.
• Maximum weight load 30Kg. Do not overload.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• DO NOT use this item if any components are missing or damaged.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
Hardware Check List
A B
C
4x Legs1x Seat
1x Seat Back
1x Bolt
53mmL
1x Flat Washer 1x Allen Key 1x Spanner
1x Nut4x Plastic Washers
#1
#4
#2
#2
#5
#3
#6
STEP 1:
Working on a protected/carpeted surface to prevent damage to your chair,
take the seat panel (A) and turn it over so that the 4 wooden blocks are facing
up.
Thread a plastic washer (#2) over the end of the threaded rod of one leg (B)
and insert into the wooden block. Turn the leg with your hands and FULLY
tighten.
Repeat with remaining 3 legs (B).
Ensure all legs are fully tightened before standing the chair onto its feet.
Hardware for Step 1:
4x #2 Plastic Washers
A
B
B
B
B

4
#1
#4
#3
STEP 2:
Insert the end of the seat back (C) into the slot on the seat (A).
Take the bolt (#1) and insert into the hole visible from the back of the chair.
If there seems to be an issue with the alignment of the holes on the seat back and
the seat and bolt will not go through the hole, please turn the head around and try
again.
Thread the metal washer (#4) over the end of the bolt and follow with the
nut (#3). Nut to be attached to bolt metal end rst.
When tightening the nut, hold it still with the spanner and use the Allen key
to tighten the bolt.
Ensure the nut/bolt xing is FULLY TIGHTENED.
STEP 3:
Your item is now ready to use.
C
Hardware for Step 2:
1x #4 Flat Washer
1x #1 Bolt
1x #3 Nut
Copyright© 2020 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Please check all xtures and ttings
regularly and tighten as necessary.