Great Little Trading Rackham L3907 User manual

1
Rackham Toy Box
17/07/2017
V2
easy - medium - hard
Assembly Difculty
one-person job
L3907
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
•It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
•Assemble and use on a flat and level surface.
•To avoid possible injury from tipping - Do not allow children to climb
on this or multiple stacked units.
•Maximum weight load 12kg. Do not overload.
•Serious or fatal crushing injuries can occur from furniture tipping
over. Ensure you secure this furniture product to the wall before you
use it using the kit provided. If you have not received an anti-tip kit
with your product please contact Customer Services.
•Check all fixtures and fittings regularly and tighten as necessary.
• Please retain these instructions for future reference.
Customer Service:
•If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
•Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
AB
2x Side Panels
D
C
1 x Back Panel
1 x Front Panel 1 x Base Panel
You will need
(not supplied)
Phillips Head Screwdriver
8x Cam Dowels
35mmL
8x Cam Locks
14mm dia
#1 #2
Hardware for Step 1:
4x #1 35mmL cam dowels
STEP 1:
Using the screwdriver, insert 4x cam dowels (#1) into the left side panel (A).
A
#1
#1 #1
#1
A
Hardware for Step 2:
4x #2 cam locks
C
#2
#2
#2
#2
B
STEP 2:
Line up front panel (C) to side panel (A) and attach using 2x cam locks (#2). Repeat
the process for the back panel (B) using 2x cam locks (#2). Tighten the cam locks with
the screwdriver.
A

4
C
A
C
A
B
D
C
A
A
B
A
Copyright© 2016 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 5:
Assembled item.
STEP 3:
Slide base panel (D) into the grooves as shown above.
A
#2#1
#2
#1
#2
#2
#1
#1
B
C
STEP 4:
Using the screwdriver, insert 4x cam dowels (#1) into the right side panel (A). Line
up front panel (C) to side panel (A) and attach using 2x cam locks (#2). Repeat the
process for the back panel (B) using 2x cam locks (#2). Tighten the cam locks with
the screwdriver.
Hardware for Step 4:
4x #2 cam locks
4x #1 35mmL cam dowels
STEP 6: Please be aware that we advise that safety straps are used to secure this to
the wall. The 2x pilot holes indicated on the unit are to attach the anti tip straps
included separately with this item. For details on securing the unit to the wall see the
anti-tip kit guidance.
Please note that we advise that if stacked, only the top unit is required to be
tethered to the wall. You may receive multiple anti-tip kits if multiple stacking
units are purchased.
A