Great Little Trading Alba Regular L4466 User manual

1
Alba Regular - Adjustable Shelf Unit, White
L4466
easy - medium - hard
Assembly Difculty
one-person job 29/05/2019
V1
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Please read these instructions carefully before assembly.
• Warning! Not suitable for children under 3 years due to small parts
which may become detached and present a choking hazard.
• Assembly by a competent adult is required.
• Unassembled product contain small parts which may pose a choking
hazard to young children.
• During assembly children should be kept away from the product due
to possible risk of injury.
• Assemble and use on a at and level surface.
• This product is heavy, we recommend that you build it where you are
planning to use it.
• This unit must be used in conjunction with Alba Regular Base + Top
Shelf unit. All stacked furniture combinations must start with a GLTC
Alba base unit.
• It is recommended that the Alba range is only stacked 3 units high
i.e. 1 x toy box base + top shelf & 2 x middle units.
• Do not use if any parts are missing or damaged as this may lead to
products being unstable.
• DO NOT use power tools in the assembly of this product as there is a
risk of over tightening and consequently splitting of the wood.
• Do not over tighten hardware. Cam dowels should be inserted to
the collar. Back panel screws should be screwed until they naturally
tighten/stop. This is difcult to feel if power tools are being used.
• WARNING! FURNITURE TIPPING RISK. Serious or fatal crushing
injuries can occur from furniture tipping over. Ensure you secure this
furniture product to the wall before you use it, using the kit provided.
If you have not received an anti-tip kit with your product please
contact Customer Services.
• To avoid possible injury from tipping - DO NOT allow children to step
or climb on the product.
• Check all xtures and ttings regularly and tighten as necessary.
• Remove all packaging before allowing your child to use the product.
• Please retain for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]

3
A B
C D
E F
1x RH Side Panel
#1 #2
#3 #4
#5 #6
14x 14mmL
Domed Head Screws
You will need
(not supplied)
Philips Head Screwdriver
Component Check List Component Check List
1x LH Side Panel
1x Top Panel 1x Base Panel
2x Back Panels 1x Shelf Panel
4x Shelf Supports
8x Wooden Dowels
25mmL
8x 12mmL
Cam Locks
8x 35mmL
Cam Dowels

4
Hardware for Step 1:
STEP 1:
Prepare the side panels.
Insert 4x cam dowels into the four holes on the corners of BOTH side panels
A & B.
8x #1 Cam Dowels
A
B
#1
#1
#1
#1
#1
#1
#1
#1
#1
4x #3 Cam Locks
Hardware for Step 2:
4x #2 Wooden Dowels
A
C
D
#2
#3
#2
#3
#3
#3
#2
#2
#2
#3
STEP 2:
Take Panel A and insert 4x wooden dowels (#2) into the holes at the edges of the panel
as shown. Position with the grooved edge on the oor.
Connect top panel C and base panel D with the side panel.
Note the positioning of these panels.
- Ensure that the large drill holes on these panels are facing towards the BASE (the
protruding end of the side panel.)
- The grooved edges should be on the oor.
Insert 2x cam locks (#3) into the large drill holes on BOTH panels C & D and turn
clockwise to secure.
Using Cam Locks:
When inserting into the panel, ensure that each cam lock’s arrow is
pointing towards the drill hole on the side edge of the panel & the
dowel that it will be receiving.When the panels are in the connected
position, using a screwdriver, turn the cam lock in a clockwise
direction to lock and secure.
BASE
TOP

5
STEP 3:
Repeat step 2 to x side panel B in position, again ensuring the panel is positioned
with the grooved edge on the oor and the protruding end pointing in the same
direction as the large drill holes on the underside of panels C & D (towards the
base).
Ensure all cam locks are tightened fully.
STEP 4:
Carefully turn unit over, please do this with a second person if necessary.
Place both back panels E on the unit and align with the pilot holes on the
grooved back edges. Secure the panels in place with 14x domed head screws
(#4).
4x #3 Cam Locks
Hardware for Step 3:
4x #2 Wooden Dowels
#3
#3
#3
#3
#2
#2
#2
#2
#2 #3
B
CA
D
Hardware for Step 4:
14x #4 Domed Head Screws
E
E
#4
BASE
TOP
#4
#4
#4
#4
#4
#4
#4
#4
#4
#4 #4
#4
#4
#4
B
D