Great Little Trading Star Bright L4944 User manual

1
Star Bright Toddler Bed
L4944
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
10/12/2019
V1
easy - medium - hard
Assembly Difculty
two-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
www.gltc.co.ukwww.gltc.co.uk

2
Safety Warnings:
• Toddler bed:This bed conforms to BS 8509:2008+A1:2011
• Suitable for children from 18 months to 4 years old.
• This bed is suitable for use with mattress size: 140cmL x 70cmW x
10cmD
• This bed is tested to a maximum weight load of 16 stone/ 106 KG.
• CAUTION Adult assembly required.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury. Do not use this item if any components are
missing or damaged.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Assemble and use on a at and level surface
• This product is heavy.We recommend that you build it where you are
planning to use it.
• Do not place this child’s bed near heat sources, windows and other
furniture.
• Children are likely to play, bounce, jump and climb on beds, therefore
the child’s bed should not be placed too close to other furniture,
windows, blind cords, curtain pulls or other strings and cords.
• Do not use this child’s bed if any part is broken, torn or missing. Use
only spare parts approved and supplied by the manufacturer.
• For your child’s safety, this bed should be placed either tight to any
wall or have a gap of 300mm between the wall and the side of the bed.
• Dismantle this bed if required to be placed in long term storage or for
transportation.
• Regularly check all xtures and ttings and tighten as necessary.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
Product Care and Information:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Please ensure the room in which this bed is to be used is well
ventilated or aired regularly in order to keep humidity low in and
around the bed.
• Made in China.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
IMPORTANT
READ CAREFULLY - KEEP
FOR FUTURE REFERENCE.

3
Component Check List Component Check List
#1
A
C
E
G
B
D
F
#2
#3
#5
#4
4x Hex Bolt
(122mm)
10x Hex Bolt
(66mm)
6x Wooden Dowel
1x Headboard
1x Side Rail
1x Guard Rail
5x Slats
1x Footboard
1x Side Rail
1x Guard Rail
4x Barrel Nut
(Silver)
10x Barrel Nut
20x Slat Top Hat Nut 1x Allen Key
#6
#7
20x Slat Bolt
(35mm)
(not supplied)
Your will need a Phillips
Screwdriver

4
STEP 1:
Attach the guard rails to the side rails.
Position the side rails (C&D) as shown - the holes on each of the side rail
edges should be at the same end.
Insert 2x wooden dowels (#1) into the inner holes on side rail panel D and
position the guard rail panel E onto the side rail.
Insert 2x barrel nuts (#3) into the holes on the guard rail then insert 2x long
bolts (#2) through the side rail from the underside and into the barrel nuts.
Fully tighten using the Allen key.
Repeat for panels C & F.
STEP 2:
Insert 1x wooden dowel (#1) into the lower hole of the guard rail (E).
Insert 3x barrel nuts (#5) into the remaining holes of the side rail (D) and
guard rail (E).
Join headboard (A) to the side/guard rail then insert 3x hex bolts (#4) to
secure. Fully tighten the hardware with the Allen key provided.
Repeat with panels F & C.
Insert 2x Barrel nut (#5) into the ends of BOTH side rails (C&D). With the
aid of a second person lifting both of the side rail ends, x the footboard (B) in
place with 2x Hex bolt (#4) on both sides of the bed.
Ensure all bolts are fully tightened.
NOTE:
Make sure these holes are on the
top edge of the side rail are the
headboard end.
NOTE:
The recessed holes
to be facing outward
on the headboard and
footboard.
4x #3 Barrel Nut (Silver)
4x #2 Hex Bolt (122mm)
Hardware for Step 1:
4x #1 Wooden dowel
10x #5 Barrel Nut
4x #1Wooden dowel
1x Allen key
Hardware for Step 2:
10x #4 Hex Bolt (66mm)
FF
C
#2
#2
#2
#2
#1
#1
#1
#1
#3
#3
#3
#3
#4
#4
#4
#4
#4
#4
#4
#4
A
C
D
#1
#1
#5
#5
#5
#5
#5
#5
#5
#5
#5#5
B
D
E
E

5
STEP 3:
Lay the slats (G) in place and align with the drill holes on the slat support rails.
Fix EACH slat in place with 4x Bolt (#6) & 4x Top Hat Nut (#7).
Hardware for Step 3:
20x #6 Slat Bolt
20x #7 Slat Top Hat Nut
Copyright© 2020 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
The toddler bed is now ready to use.
Please use a 140 x 70cm x 10cm mattress is used with this bed.
G
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#6