Great Little Trading Baa Baa L4950 User manual

1
Baa Baa Sheep Bookcase
L4950
03/12/2019
V1
easy - medium - hard
Assembly Difculty
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Warning! Not suitable for children under 3 years due to small parts
which may become detached and present a choking hazard.
• Assembly by a competent adult is required.
• Unassembled product contain small parts which may pose a choking
hazard to young children.
• During assembly children should be kept away from the product due
to possible risk of injury.
• Assemble and use on a at and level surface. Be cautious of using this
unit on uneven oor surfaces such as rugs. If in doubt, secure to the
wall using the anti-tip kit provided.
• This product is heavy, we recommend that you build it where you are
planning to use it.
• WARNING! FURNITURE TIPPING RISK. Serious or fatal crushing
injuries can occur from furniture tipping over. Ensure you secure this
furniture product to the wall before you use it, using the kit provided.
If you have not received an anti-tip kit with your product please
contact Customer services.
• To avoid possible injury from tipping - DO NOT allow children to step
or climb on the product.
• Maximum shelf weight load 5kg. Do not overload.
• Check all xtures and ttings regularly and tighten as necessary.
• Remove all packaging before allowing your child to use the product.
• Please retain for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]

3
A B
C D
E F
x1 Back panel (head)
#1 #2
#3 #4
#5
8x Wooden Dowels
25mmL
2x Double Headed Cam
Dowels 73mmL
8x Screws
30mmL
Component Check List Component Check List
x1 Back panel (tail)
x2 Vertical divider panel (legs) x1 Upper shelf
x1 Central vertical divider panel x1 Lower shelf
4x Cam Locks
1 x Anti-Tip Strap Kit
You will need
(not supplied)
Philips Head Screwdriver
#6

4
STEP 1:
Join back panels (A and B) together using 2x double headed cam dowels (#1)
and 2x wooden dowels (#2).
Insert 2x cam locks (#3) into EACH panel and turn clockwise to tighten.
The backboard component is now complete.
2x #2 Wooden Dowels
Hardware for Step 1:
4x #3 Cam Locks
2x #1 Double Headed Cam
Dowels
STEP 2:
Slot the two C panels into the two cutouts at each end of shelf panel D as
shown. Please ensure the straight edges of panels are all at against the oor.
C
C
D
#1
#2
#3
A
B
Using cam locks:
When inserting into the panel, ensure that each
cam lock’s arrow is pointing towards the drill
hole on the side edge of the panel & the dowel
that it will be receiving.
When the panels are in the connected position,
using a screwdriver, turn the cam lock in a
clockwise direction to lock and secure.

5
STEP 3:
Attach panel E to panel F using 2x wooden dowels (#2).
STEP 4:
Slot the joined panels E & F into the remaining cutouts in panels C (x2) and D.
The shelf component is now complete.
Hardware for Step 3:
2x #2 Wooden Dowels
E
E
C
C
F
F
D
#2

6
STEP 5:
Insert 4x wooden dowels into the back panel using the holes as shown, and then
carefully lower the shelf component onto it.
Note: A second person may be required to help lift the shelf onto the back panel.
STEP 6:
Carefully stand the unit on its feet so you have access to the back of the
bookcase, ensuring the shelves are supported and don’t separate from the
backboard.
Secure the backboard to the shelf component using 8x screws (#4).
Hardware for Step 5:
4x # 2 Wooden Dowels
Hardware for Step 6:
8x #4 30mmL Screws
#4
#2

7Copyright© 2020 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 7:
Before you use your unit, we strongly advise that you use the anti-tip kit
(included) to secure this product to the wall, especially if young children have
access to the unit.
Hardware for Step 7:
1x #5 Anti-Tip Strap Kit
Your unit is now ready to use.
#5