Great Little Trading Pigeonhole L4926 User manual

1
Pigeonhole Wall Shelf
11/12/2019
V1
easy - medium - hard
Assembly Difculty
one-person job
L4926
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult assembly required.
• In an unassembled state product contains small parts, which may pose
a choking hazard, not suitable for children under 3 years.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• Check the item regularly for signs of damage, which may make the
product unsafe.
• Maximum weight load is 10kg. Do not overload. We do not
recommend that you place heavy items above children’s beds or above
head height as products may fall and cause injury.
• Please retain these instructions for future reference.
• Wall xings not included. Please use appropriate xings that are
suitable for the wall type. If in doubt, please seek professional advice.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care and Information:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Made in China.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List Component Check List
A
2x
B
C
1x
6x Wooden dowel
5x20mm
14x Cam dowel
7x36mm
14x Cam lock
14x10mm
7x Screw
3.5x25mm
D
F
G
You will need
(not supplied)
Philips Head Screwdriver
1x
3x
#1 #2
#3 #4
1x 1x
1x
E

4
STEP 1:
Insert x1 wooden dowel (#1) into both panels A.
Attach panels A to panel B using x2 screws (#2).
Hardware for Step 1:
2x #1 Wooden dowel
2x #2 Screw
Hardware for Step 2: Hardware for Step 4:
2x #2 Screw 8x #4 Cam lock
STEP 2:
Attach panel E to panels A and B using x2 screws
(#2).
STEP 4:
Attach panels C and D to the joined panels E and B,
securing in place with x8 cam locks on each side (#4).
Hardware for Step 3:
8x #3 Cam dowel
STEP 3:
Insert x4 cam dowels (#3) in to the holes shown on
panels C and D.
A
A
B
#1
#1
#1
#2
#2
A
A
B
E
#2
#2
#3
#3
#3
#3 #3
#3
#3
#3
CD
C
B
E
D
#4
#4
#4
#4
#4
#4
#4
#4

5Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 5: Hardware for Step 7:
STEP 5:
Screw in x6 cam dowels (#3) into panel F.
STEP 7:
Carefully turn over the unit.
Insert 2x cam locks (#4) into panel E as shown, and
turn clockwise to tighten.
Attach the 3x pegs (G) to panel E using 3x screws
(#2) as shown. Ensure the routed groove in the peg is
facing toward the top of the unit.
6x #3 Cam dowel 2x #4 Cam lock
3x #2 Screw
#3 #3 #3 #3
#3
#3
F
E
B
C
#4
#4
#4
#4
#4
#1
#1
#1
#1
Hardware for Step 6:
STEP 6:
Insert x4 wooden dowels #1 into panel F.
Attach top shelf panel F using x4 cam locks (#4) to
secure in place turning clockwise to tighten.
4x #1 Wooden dowel
4x #4 Cam lock
E
B
D
G
G
G
#2
#2
#2
#4
#4
2x Wall Fixings (NOT INCLUDED)
We suggest using M4*40mm at head
screws or screws of a similar size. Please
ensure to use the appropriate wall xing
for your wall type. If in doubt, please seek,
professional advice.