Great Little Trading L5115 User manual

1
Shaker Peg Rail, Colour Pop
06/11/2020
V1
easy - medium - hard
Assembly Difculty
L5115
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
• Wall xings not included. Please use appropriate xings that are
suitable for the wall type. If in doubt, please seek professional advise.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
• Adult assembly required.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• Max total weight 10kg. DO NOT overload.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A
A
B
#1
#1
#2
#2
#3 #4
6x Wooden Pegs
1x Back Board
6x Screws
3x Cam Locks
1x Shelf Panel
3x Cam Dowels
You will need
(not supplied)
Phillips Head Screwdriver
Hardware for Step 1:
x6 #1 Wooden Pegs
x2 #2 Screws
STEP 1:
Attach 6x wooden pegs (#1) to panel A using 6x screws
(#2).

4
Hardware for Step 2:
Hardware for Step 3:
x3 #3 Cam Dowels
x3 #4 Cam Lock
A
STEP 2:
Insert 3x cam dowel (#3) to panel B.
STEP 3:
Attach panel A to panel B using 3x cam locks (#4).
* Please note: Turn cam locks
180 degrees or until tight.
#3
B
B
#4
Copyright© 2021 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Your product is now ready to be attached to the wall
for use.
screws or screws of a similar size. Please
for your wall type. If in doubt, please seek,
professional advice.
We suggest using 2 x (4x38mm)