GTD GTD-470NBSW User manual

GTD-470 N BSW
BEAM-SPOT-WASH
Moving Head
User Manual

Thank you for choosing GTD-470 N BSW product. The product integrates beam, spot and
wash effect in one body, with compact size
and light weight. Modular structure design, simple disassembly,
easy maintenance, new turbo cooling
system ensure the light source works in a good environment.
With OSRAM SIRIUS HRI 470W XL discharge
lamp, combined with unique optical design, 14 times optical zoom and diffuser
film, the beam effect is sharper, fuller and more penetrating. Also, it comes with linear adjustment
of the brightness and the wash effect is soft and natural. With industry-leading 32-bit
control system, combined with high-performance motor group, the fixture
can run fast and accurately;
RDM technology can realize remote setting
of address code and other functions.The product is suitable
for large and medium-size performance activities such as celebrations, press conferences and so
on, providing best solutions for production companies!

Guangzhou GTD Culture & Technology Group Co.,Ltd. | 27 Fu Yuan Yi Road, Guangzhou 510805, P.R.China
[phone] | [phone] fax | www.gtd-lighting.com | [e-mail]
Table of contents
1.Safety instructions.......................................................................................................................................1
2.Product introductions...................................................................................................................................3
2.1 Dimensions ..............................................................................................................................................3
2.2 Fixture overview .......................................................................................................................................4
2.3 Accessories..............................................................................................................................................4
3.Packing and shipping..................................................................................................................................5
3.1 Protection lock.........................................................................................................................................5

3.2 Unpacking................................................................................................................................................5
3.3 Packing after use.....................................................................................................................................5
4.Installation...................................................................................................................................................6
4.1 Clamps installation...................................................................................................................................6
4.2 Device installation....................................................................................................................................6
4.3 Lamp fitting and adjustment...................................................................................................................7
5.Power / Control connection.......................................................................................................................8
5.1 Power connection...................................................................................................................................8
5.2 Control connection..................................................................................................................................8
5.3 Testing....................................................................................................................................................8
6.Control panel.............................................................................................................................................9
6.1 Panel instruction.....................................................................................................................................9
7.Technical specification..............................................................................................................................10
8.Gobos and colors......................................................................................................................................13
8.1 Gobo specification..................................................................................................................................13
8.2 Gobos.....................................................................................................................................................13
8.3 Colors.....................................................................................................................................................14
9.Menu structure........................................................................................................................................15
10.DMX protocol...........................................................................................................................................18
11.System wiring diagram............................................................................................................................23

12.Maintenance and Troubleshooting..........................................................................................................24
12.1 Troubleshooting....................................................................................................................................24
12.2 System wiring diagram.........................................................................................................................24
13. Spare parts list........................................................................................................................................28

1
1. Safety instructions
Before using the fixture, read the latest version of the product user manual, paying particular attention to
the safety instructions. Please check www.gtd-lighting.com for the latest revision/update of the user manual.
m
ta
tc
The manufacture of this fixture, are not responsible for damages, resulting from misuse of
this fixture, due to the disregard of the information printed in this user manual.
DANGER!
Hazardous voltage. Risk of lethal or severe electric shock
WARNING!
Wear protective eyewear. Never look directly into the light source.
WARNING!
Burn hazard. Hot surface. Do not touch.
Only to direct mounting on non-combustible surfaces.
Minimum distance to lighted objects.
Replace all cracked glass shields.
INDOORS USE ONLY!
Do not expose fixture for rain and moisture.
Maximum ambient temperature.
Maximum temp of the external surface.

2
General guidelines
Never open this fixture while in use.
The fixture should be kept clean. DO NOT operate the fixture in extreme heat or dusty environments.
Avoid contact with chemical liquid.
This fixture is a professional light effect designed for INDOOR / DRY LOCATIONS ONLY on stage, in
nightclubs, theatres, etc.
Minimum distance to lighted objects must be 49.21feet (15m).
Maximum temp of the external surface 248˚F (120˚C).
Maximum ambient temperature 113˚F (45˚C).
Minimum distance of inflammable materials from the surface 1.6 feet (0.5m).
Lamp should be changed if damaged or distorted in shape due to extreme heat.
Cover, prism or LCD Menu Function Display with visible damages such as cracks or scratches must
be replaced to ensure performance of the fixture.
Disconnect the fixture from power before changing any parts or accessories.
Basic insulation should be maintained between the controllable device and the product power supply.
Make sure that the installation area can hold a minimum point load of 10 times the weight of all installed
fixtures, clamps, cables, auxiliary equipment, etc. Check that the cover, clamps and locks are undamaged.
Certified safety cables must always be used when installing the fixture.

3
The fixture is only intended for installation, operation and maintenance by qualified professional.
Instructions stated in the manual must be complied.
The fixture must be kept in a well-ventilated place at least 50 cm away from any wall surface. Check if
the fans or ventilation openings are unblocked.
This fixture uses discharge lamp. To avoid reducing the lamp’s life, wait at least 15 minutes after
powering off to allow the unit to cool down before handling.
Broken or damaged cables and light source can only be fixed or changed by certified technicians,
certified local distributors or the manufacturer to ensure operational safety.
Do not stick filters or other materials onto the lens. Do not modify the fixture or install other than GTD
manufactured parts.
For questions regarding safety operation, please contact our technical personnel or call the service
hotline [phone].
2. Production instructions
2.1 Diamension

4
701.3
[27.6inch]
583.1
[23inch]
2.2 Fixture overview

5
2.3 Accessories
Item
Qty
Unit
Remark
User Manual
1
Pc
-
Safety cable
1
Set
φ5*60cm 7*19pc with hook Material：Steel
3-pins signal line
1
Set
-
Head module
Color & gobo & CMY
wheels module
CMY module
Light module
Pan&tilt scan
Base module

6
3.Packing and shipping
3.1 Protection lock
Pan and tilt locks are equipped to ensure safe transportation.
PAN: 4 lock positions are located evenly on the Pan.
TILT: 5 lock positions are located on left and right side of the Tilt with the third one in the center
垂直 保护 锁
水 平 保 护 锁
3.2 Unpacking
Notes
All products are quality controlled and checked for any faults before they are dispatched to customers. If
the fixture is damaged during delivery, the customer must notify the shipper and manufacturer to file a
damage insurance claim. Photographic evidence of the damage must be provided.
Flight-Case（Specifications：790*522*825mm，2Pc/Boxs）
Open the cover of the flight-case and remove the plastic packing bags. Hold the handles of the fixture
firmly and take it out carefully.
Cardboard box（Specifications：560*510*662mm，1Pc/Box）

7
Open the box and take out the whole set of packaging foam which contains both the fixture and its
accessories. Remove the foam from the top, put away the accessories, and then take out the fixture
wrapped in the plastic bag
Notes
Check if the pan and tilt are unlocked before connecting the fixture to power.
3.3 Packing after use
1. Switch off the fixture and wait for at least 5 minutes before disconnecting it from AC power. Cool down
the fixture for at least 15 minutes before packing.
2. Lock pan and tilt.
3. Flight case: Wrap the fixture in plastic bags. Hold it by the handles, and then carefully place it inside
the flight case along with all the accessories. Close the cover. Only 3 layers are allowed when piling up
the flight cases. Do not upside down.
4. Cardboard box: Wrap the fixture in plastic bags. Put it in the packaging foam along with all the accessories.
Place the other set of packaging foam on top then carefully put it inside the cardboard box.
4. Installation
4.1 Clamps installation
The fixture can be placed on the stage or mounted on the truss facing any direction. Attach the
clamps to the mounting position on the base of the fixture.
Warning
Use two clamps when mounting the fixture. Turn the screws attached to each clamp a 1/4 turn clockwise to lock.
Always remember to use the safety cable which goes through the mounting hole on the
base. Do not attach the safety cable on the handle.
4.2 Device installation

8
1. Make sure there is no damage on the clamps or safety cables before installation.
2. The clamp is mounted on the chassis of the fixture. Horizontally insert the clamp into the
mounting holes of the chassis. Fasten the clamp tightly by a 1/4 turn clockwise. Fix another
clamp in the same way.
3. Check if pan and tilt are unlocked before connecting the unit to AC power.
4.3 Lamp fitting and adjustment
1. Disconnect the fixture from AC power. Cool down the fixture. Set the Tilt lock in a horizontal position.
2. Remove the bulb: Use a screwdriver to loosen 4 screws in the back cover1 and remove the bulb plate1,
Safety cable
mounting position
Clamp
Enlarge

9
remove the back cover2 with the same method. Unplug the connected line in bulb, press the top of the
bulb down, so that can remove the bulb directly.
3. Install the bulb: Press the bulb into the elastic port, push the light bulb to the hole and plug in the bulb
cable, install the back cover1&2.
4. When the bulb is placed in the mounting bracket, observe whether the bulb is placed correctly and the
端 盖 板
后 端 盖 板
放大图
拆 掉 后 端 盖 板
将灯泡推入,
并把压紧片往灯泡方向推紧
锁紧压紧螺丝
1
2
Note
The fixture is equipped with Spec SIRIUS HRI 470W XL, which is featured with high efficiency and short-arc
characteristic, such as a stable 7500K color-temperature and average lifespan of 1500hrs
Note
Fitting another type of lamp will cause potential damage to the fixture. Change the lamp before it reaches
Back cover
Back cover
Enlarged
Remove the back
Push the light bulb
to the hole，press
it down

10
its lifespan. Read the guidelines in the package carefully when fixing the lamp.
To avoid any impact on the beam, do not touch the bulb with your bare hands. The lamp must be kept
clean with the use of the clean paper contained in its package
5. Power/ Control connection
5.1 Power connection
Connection method:
L (Live) Brown wire
E (Earth) Yellow / Green bi-color wire
N (Neutral) Blue wire
The voltage and frequency of the power source must be in compliance with the ones marked on
the fixture. It is strongly recommended that each fixture are to be connected to the power source
separately so that they can be switched on / off individually.
5.2 Control connection
The fixture has 3-pin & 5-pin XLR connectors for DMX data input and output as shown below. Connection
between the console and fixture, and between fixtures must be made with 2 core screened DMX signal
cable. Maximum connecting distance of signal cable is 150 meters. Additional DMX512 signal-amplifier is
recommended for longer distance。
DMX 512
1：Ground
2：—
3：+
DMX 512
1：Ground 2：—
3：+ 4:Obligate
5: Obligate

11
Connect the Console’sDMX OUTPUT to the first fixture’sDMX INPUT, then the first fixture’s DMX
OUTPUT to the second fixture’sDMX INPUT and so on. It is recommended not to connect more than 32
units on a single DMX universe. On the last fixture‘s output connect a DMX terminator. (The terminator is
a 3-pin & 5-pin XLR connector with a ¼W and 120Ωresistor between the pin 2 and pin 3) as shown below:
控 台 输 入 输 入 输 出 输 入 输 出 输 入 输 出 信 号 终 端
5.3 Testing
Connect the fixture to AC power. Check if the lamp is on and the fixture is independently
controllable before putting into operation.
6. Control panel
6.1 Using the control panel
15
GTD-470 N BSW
GTD-470 G BSW
Console
input
output
input
output
input
output
DMX terminator

12
The control panel features touch-sensitive buttons and LCD digital display for quick and easy setup
of address code and functions menu.
Press UP or DOWN to view or select the function menu.
Press ENTER to choose a function and enter into corresponding sub menu. Each menu represents
a specific function of the fixture.
Press ENTER to select the specific function and save the changes or enter into the submenu, then
press UP or DOWN to change the value of the selected function (increase or decrease).
Press MENU to return to the previous menu or exit.
LED indicators: Power on: RED power LED indicator on

13
7. Technical specification
Optical
Light source: SIRIUS HRI 470W XL
Expected average lifetime: 1500 h
Color temperature correction: 7500K
Zoom: BEAM 0°-2.5°/ SPOT 3°-40°/ WASH 5°-45°
CRI：Ra≥85
Focus: High-precision glass lenses, electronic linear HD focus
Prism: 1 pc tip 16-facet prism，1 pc Symmetry facet prism, control the effect independently, make double
concentric effect when combine two prism
Softening effect: 1 pc Softening Mirror，After softening, the light spot is soft and natural
Gobo
Rotating gobo wheel: 8 interchangeable gobos + open, indexing, CW/CCW rotation, variable speed
Fixed gobo wheel: 7 gobos + open，CW/CCW rotation, variable speed
Gobo outside diameter: 14.4 mm
Max. Image diameter: 9mm
Max. Thickness: 1.1mm
Gobo material: Glass
Color
Color wheel: 12 colors + open, split color, CW/C CW rotation, “Rainbow effect”in both directions
Electrical
Power input, nominal:AC 100-240V 50/60Hz
Max. Power consumption: 646W, max current: 6.878A, PF: 0.997
Power supply unit: Auto-ranging electronic SMPS
Main fuse: 10A
Ballast: Electronic
Power input: Self-contained power cord
DMX data input/output: Chassis 3-pin & 5-pin (in/out)
Control and programming

14
Control channels (DMX): 27/24/34
Protocol: DMX-512 RDM
Display: Graphic LCD backlit
Physical / Installation
Weight: 30Kg (66lbs.)
IP rating: IP20
Material: Aluminum, steel, plastic
Mounting points: Four quarter-turn locking points + attachment points for safety wire
Dynamic effects
Pan/Tilt movement: 540˚/270˚
Iris: Motorized adjustable iris, wide range of variable pulse effects
Strobe: 1-25Hz, synchronized, pulse effects
Dimmer: 0-100%, mechanical dimming
Thermal
Operating range: 5˚F to 113˚F (-15˚C to +45˚C)
Startup range: -13˚F to 113˚F (-25˚C to +45˚C)
Storage range: -40˚F to 140˚F (-40˚C to +60˚C)
Cooling: Active fan
Humidity: ≤85%
Certification and Safety
EMC: EN 55103-1:2009, EN 55103-2:2009, EN 61000-3-2:2006+A2:2009, EN 61000-3-3:2013,
GB/T 17743-2007, GB 17625.1-2012
Safety: EN 60598-2-17:1989/A2:1991, GB 7000.1-2015, GB 7000.217-200811
Photometric：

15
0
5m
10m
15m
20m
25m
5m
10m
15m
20m
25m
Beam Diameter(m/ft.)(2.5°)
Distance(m/ft.) 0 20/65.62
Ø0.95/3.12 Ø1.9/6.23 Ø2.85/9.35 Ø3.8/12.47
40/131.23 60/196.85 80/262.46
I ll u m in an ce( LUX)
96400 26200 9800 3160
2.5°
2.5
°
0
5m
10m
15m
20m
25m
5m
10m
15m
20m
25m
Beam Diameter(m/ft.)( 3 °)
Beam Diameter(m/ft.)(
40
°)
Distance(m/ft.) 0 5/16.4
Ø0.26/0.85 Ø0.38/1.25 Ø0.54/1.77 Ø0.69/2.26
Ø3.85/12.63 Ø7.68/25.20 Ø11.5/37.73 Ø15.3/50.2
10/32.81 15/49.21 20/65.62
I ll u m in an ce( LUX)
736000 276300 164000 960003°
5370 1530 840 35040 °
3°
40°
GTD-470 N BSW(BEAM)
GTD-470 N BSW(SPOT)
0
5m
10m
15m
20m
25m
5m
10m
15m
20m
25m
Beam Diameter(m/ft.)( 5 °)
Distance(m/ft.) 0 5/16.4
Ø0.14/0.95 Ø0.28/1.84 Ø0.42/2.72 Ø0.56/3.67
Beam Diameter(m/ft.)( 5°) Ø0.56/27.62 Ø0.83/41.34 Ø1.12/55.12Ø0.29/13.81
10/32.81 15/49.21 20/65.62
Il lu m i nan ce( LUX)
94000 28500 14900 85305°
1970 497 305 10945 °
5°
45°
Beam Diameter(m/ft.)( 45°) Ø2.21/0.95 Ø4.23/1.84 Ø6.62/2.72 Ø8.46/3.67
Beam Diameter(m/ft.)( 45°) Ø8.42/27.62 Ø12.6/41.34 Ø16.8/55.12Ø4.21/13.81
50%
10%
50%
10%
GTD-470 N BSW(WASH)
Other features
Enhanced stability of the fixture due to the wide input voltage AC/DC switching power supply