GTD LMZ1537 User manual

LED Moving Head
GTD-LMZ1537
User’s Manual
Guangzhou GTD Lighting Technology Co., Ltd.
Tel: [phone]
Fax: [phone]
http://www.gtd-lighting.com

GTD-LMZ1537 User Manual
1
© 2017 GTD all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to
change without notice. GTD logo and identifying product names and numbers herein are trademarks of GTD. Copyright
protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or
judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of
their respective companies and are hereby acknowledged. All non-GTD brands and product names are trademarks or
registered trademarks of their respective companies.
GTD and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical
damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent
assembly, installation, rigging, and operation of this product.
Guangzhou GTD Lighting Technology Co., Ltd. | 27 Fu Yuan Yi Road, Guangzhou 510805, P.R.China
[phone]| [phone] fax | www.gtd-lighting.com | [e-mail]

GTD-LMZ1537 User Manual
2
Contents
Safety instructions...................................................................................................................................................................... 3
General guidelines...................................................................................................................................................................... 4
Packing and shipping.................................................................................................................................................................. 5
Protection lock................................................................................................................................................................................ 5
Unpacking ....................................................................................................................................................................................... 5
Packing after use............................................................................................................................................................................. 5
Accessories................................................................................................................................................................................. 6
Product introduction .................................................................................................................................................................. 6
Installation ................................................................................................................................................................................. 7
Clamps installation ......................................................................................................................................................................... 7
Device installation .......................................................................................................................................................................... 7
Power / Control connection ....................................................................................................................................................... 8
Power connection........................................................................................................................................................................... 8
Control connection ......................................................................................................................................................................... 8
Testing ............................................................................................................................................................................................ 8
Control panel.............................................................................................................................................................................. 9
Menu structure ........................................................................................................................................................................ 10
DMX protocol........................................................................................................................................................................... 12
Technical specification ............................................................................................................................................................. 19
Cleaning and maintenance ....................................................................................................................................................... 21
Troubleshooting ....................................................................................................................................................................... 22
System wiring diagram ............................................................................................................................................................. 23
Spare parts list ......................................................................................................................................................................... 24
Appendix 1 ............................................................................................................................................................................... 24

GTD-LMZ1537 User Manual
3
Safety instructions
WARNING!
Before using the fixture, read the latest version of the product user manual, paying particular attention
to the safety instructions. Please check www.gtd-lighting.com for the latest revision/update of the user
manual. The manufacture of this fixture, are not responsible for damages, resulting from misuse of this
fixture, due to the disregard of the information printed in this user manual.
DANGER!
Hazardous voltage. Risk of lethal or severe electric shock.
WARNING!
Burn hazard. Hot surface. Do not touch.
WARNING!
Fire hazard.
INDOORS USE ONLY!
Do not expose fixture for rain and moisture.
It’s essential that the fixture is properly grounded. Only qualified personnel should perform electrical
connections.
WARNING!
Wear protective eyewear. Never look directly into the light source.
Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts
(brackets) included with this fixture should be used for installation.
Before applying power to the fixture, check that the source voltage matches the fixture's requirement. Every fixture
must be earthed (grounded) and installed in accordance with local electricity regulations. Do not connect it to a
dimmer system.
Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may induce
blindness.

GTD-LMZ1537 User Manual
4
General guidelines
Never open this fixture while in use.
The fixture should be kept clean. DO NOT operate the fixture in extreme heat or dusty environments. Avoid contact
with chemical liquid.
This fixture is a professional light effect designed for INDOOR / DRY LOCATIONS ONLY on stage, in nightclubs,
theatres, etc.
Minimum distance to lighted objects must be 3.28feet (1m).
Maximum temp of the external surface 158˚F (70˚C).
Maximum ambient temperature 113˚F (45˚C).
Minimum distance of inflammable materials from the surface 1.6 feet (0.5m).
LED lamp should be changed if damaged or distorted in shape due to extreme heat.
Cover, prism or LCD Menu Function Display with visible damages such as cracks or scratches must be replaced to
ensure performance of the fixture.
Disconnect the fixture from power before changing any parts or accessories.
Make sure that the installation area can hold a minimum point load of 10 times the weight of all installed fixtures,
clamps, cables, auxiliary equipment, etc. Check that the cover, clamps and locks are undamaged. Certified safety
cables must always be used when installing the fixture.
The fixture is only intended for installation, operation and maintenance by qualified professional. Instructions
stated in the manual must be complied.
The fixture must be kept in a well-ventilated place at least 50 cm away from any wall surface. Check if the fans or
ventilation openings are unblocked.
Broken or damaged cables can only be fixed or changed by certified technicians, certified local distributors or the
manufacturer to ensure operational safety.
Do not stick filters or other materials onto the lens. Do not modify the fixture or install other than GTD
manufactured parts.
For questions regarding safety operation, please contact our technical personnel or call the service hotline +8620
61808296.

GTD-LMZ1537 User Manual
5
Packing and shipping
Protection lock
Pan and tilt locks are equipped to ensure safe transportation.
PAN: 4 lock positions are located evenly on the Pan.
TILT: 3 lock positions are located on left and right side of the Tilt with the third one in the center.
Unpacking
Notes
All products are quality controlled and checked for any faults before they are dispatched to customers. If the fixture is
damaged during delivery, the customer must notify the shipper and manufacturer to file a damage insurance claim.
Photographic evidence of the damage must be provided.
Flight-Case
Open the cover of the flight-case and remove the plastic packing bags. Hold the handles of the fixture firmly and take it
out carefully.
Cardboard box
Open the box and take out the whole set of packaging foam which contains both the fixture and its accessories. Remove
the foam from the top, put away the accessories, and then take out the fixture wrapped in the plastic bag.
Notes
Check if the pan and tilt are unlocked before connecting the fixture to power.
Packing after use
1. Switch off the fixture and wait for at least 5 minutes before disconnecting it from AC power. Cool down the fixture for
at least 15 minutes before packing.
2. Lock pan and tilt.
3. Flight case: Wrap the fixture in plastic bags. Hold it by the handles, and then carefully place it inside the flight case
along with all the accessories. Close the cover. Only 3 layers are allowed when piling up the flight cases. Do not
upside down.
Cardboard box: Wrap the fixture in plastic bags. Put it in the packaging foam along with all the accessories. Place the
other set of packaging foam on top then carefully put it inside the cardboard box.

GTD-LMZ1537 User Manual
6
Accessories
Item
Qty
Unit
Notes
User Manual
1
pc
-
Clamps
2
set
G-clamp with 1/4-turn fasteners, for Ø 42-52mm, Max. 200 kg
Power cable
1
pc
Notes
Accessories are subject to change without any prior written notice.
Product introduction
1 Zoom lens
2 Radiator
3 Driver board cooling fan
4 Tilt
5 Pan
6 Base
7 LCD Menu Function Display

GTD-LMZ1537 User Manual
7
Installation
Clamps installation
The fixture can be placed on the stage or mounted on the truss facing any direction. Attach the clamps to the mounting
position on the base of the fixture.
Warning
Use two clamps when mounting the fixture. Turn the screws attached to each clamp a 1/4 turn clockwise to lock. Always
remember to use the safety cable which goes through the mounting hole on the base. Do not attach the safety cable on
the handle.
Device installation
1. Make sure there is no damage on the clamps or safety cables before installation.
2. The clamp is mounted on the chassis of the fixture. Horizontally insert the clamp into the mounting holes of the
chassis. Fasten the clamp tightly by a 1/4 turn clockwise. Fix another clamp in the same way.
3. Check if pan and tilt are unlocked before connecting the unit to AC power.

GTD-LMZ1537 User Manual
8
Power/ Control connection
Power connection
Connection method:
L (Live) Brown wire
E (Earth) Yellow / Green bi-color wire
N (Neutral) Blue wire
The voltage and frequency of the power source must be in compliance with the ones marked on the fixture. It is
strongly recommended that each fixture are to be connected to the power source separately so that they can be
switched on / off individually.
Notes
It is essential that each fixture is correctly grounded and the electrical installation conforms to all relevant Standards /
Codes of Practice for Safe Electrical Work.
Control connection
The fixture has 5-pin XLR connectors for DMX data input and output (3-pin optional) as shown below. Connection between
the console and fixture, and between fixtures must be made with 2 core screened DMX signal cable. Maximum connecting
distance of signal cable is 150 meters. Additional DMX512 signal-amplifier are recommended for longer distance.
Connect the Console’s DMX OUTPUT to the first fixture’s DMX INPUT, then the first fixture’s DMX OUTPUT to the second
fixture’s DMX INPUT and so on. It is recommended not to connect more than 32 units on a single DMX universe. On the
last fixture‘s output connect a DMX terminator. (The terminator is a XLR connector with a ¼ W and 120Ω resistor between
the pin 2 and pin 3) as shown below:
Testing
Connect the fixture to AC power. Check if the LED lamp is on and the fixture is independently controllable before putting
into operation.

GTD-LMZ1537 User Manual
9
Control panel
The control panel features touch-sensitive buttons and LCD digital display for quick and easy setup of address code
and functions menu.
Press UP or DOWN to view or select the function menu.
Press ENTER to choose a function and enter into corresponding sub menu. Each menu represents a specific
function of the fixture.
Press ENTER to select the specific function and save the changes or enter into the submenu, then press UP or
DOWN to change the value of the selected function (increase or decrease).
Press MENU to return to the previous menu or exit.
LED indicators:
Power on: RED power LED indicator on
Signal on: Green DMX indicator on
No Signal: Green DMX indicator off

GTD-LMZ1537 User Manual
10
Menu structure
LMZ1537 –Menu Structure
Revision: A
Valid from firmware version: 1.0
Level 1
Level 2
Level 3
Level 4
Info
Run setting
Address Setting
Value Display
Slave Address
Auto-Program
Music Program
Address: 001~ XXX
Pan ……, All, Off
Slave1,2,3
Master /Slave
Master/ Slave
Setting the DMX address
Display the channel value
Choose the slave address
Run auto program in master or slave
Run music program in master or slave
Device Info
Time Info
Since power on
Total Time
Last Time
Lamp On Time
Lamp Off Time
Last Time Code
Clear Last Time
Lamp Time Code
Clear Lamp Time
XXXXXX Hour
XXXXXX Hour
XXXXXX Hour
XXXXXX Hour
XXXXXX Minute
Password: XXX(88)
Yes/No
Password: XXX(111)
Yes/No
Since power on time
Product total run time
Last product run time
Lamp on time
Lamp close time
Clear last time password
Clear last time
Clear lamp time password
Clear lamp time
Temperature
Body Temperature
XXX ’C/’F
Body temperature
Software Version
X.X
The software version
System Setting
Status Setting
Console Set Addr
No Signal Status
Pan Reverse
Tilt Reverse
Pan Scan Degree
Scan Feedback
Scan Speed
Mic. Sensitivity
Standby Time
Enable/Disable
Off/Hold/Auto/Music
Enable/Disable
Enable/Disable
360/540
Enable/Disable
Quick/Middle/Low/Slow
0~99%
Disable/1~20~99 Min
Address can be changed by console
The status while no signal
Pan Reverse
Tilt Reverse
Pan Scan Degree
Scan Feedback
Change the scan speed
Microphone sensitivity
Standby time
Fan Speed
Smart Control
High Speed
Low Speed
Auto fans speed
Fans high speed
Fans low speed
Display Setting
Backlight Time
Key Lock
Language
1~80 Min/Disable
Enable/Disable
Chinese/English
Backlight off time
Press <menu> 3s to unlock
Change the language
Temperature Unit
Celsius
Fahrenheit
Temperature unit
Value Default
Pan……
Pan = XXX
The default value
Wireless Dev
Wireless Off
Wireless On
Wireless Trans.
Wireless Reset
Wireless off
Wireless on
Wireless transfer DMX data to another
Wireless reset
Restore Default
Restore/Cancel
Restore to default value

GTD-LMZ1537 User Manual
11
Level 1
Level 2
Level 3
Level 4
Info
Reset
System Reset
Scan Reset
Enlargement Reset
System reset
Pan and tilt motor reset
Enlargement motor reset
Channel Adjust
Test Mode
Pan……
Every channel test
Manual Mode
Pan
:
Pan = XXX
:
Manual control
Adjust Mode
Input Password
Pan
:
Password = XXX(99)
Pan = XXX
:
The password of adjust mode
Fixed all begin position
Channel Setting
Channel Mode
Standard Mode
Basic Mode
Extended Mode
Custom Mode 1
Custom Mode 2
Custom Mode 3
Standard channel mode
Basic channel mode
Extended channel mode
Custom channel mode 1
Custom channel mode 2
Custom channel mode 3
Set Custom Mode1
Set Custom Mode2
Set Custom Mode3
Max Channel
Pan
:
Channel = XX
Pan = CH01
:
Change the channel order
Program Edit
Select Prog.
Program Unit 1
Program Unit 2
Program Unit 3
Program 1 ~ 10
Program 1 ~ 10
Program 1 ~ 10
Choose build-in program for slave 1
Choose build-in program for slave 2
Choose build-in program for slave 3
Program Edit
Auto-Program1
:
Auto-Program10
Run
Step 1 = Scene xxx
Step 8 = Scene xxx
Choose the scene for program 1
:
Choose the scene for program 10
Scene Edit
Scene Edit: 001-250
Pan, ……Pan = xxx
Scene Time = xxx
Input By Console
Edit the channel DMX
Edit the scene time
Get scene DMX form console
Record Scene
Scene XX->XX
Record scene form console
Notes
Settings highlighted in light grey are default values.

GTD-LMZ1537 User Manual
12
DMX protocol
LMZ1537 - DMX Protocol
Revision: A
Valid from firmware version: 1.0
DMX protocol - Standard [25 channels]
Standard
(25ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
1
Strobe/Shutter
0
31
0.0%
12.2%
Closed
0(0%)
32
63
12.5%
24.7%
Open
64
127
25.1%
49.8%
Synchronous strobe from slow to fast
128
159
50.2%
62.4%
Open
160
223
62.7%
87.5%
Random strobe from slow to fast
224
255
87.8%
100.0%
Open
2
Intensity
0
255
0.0%
100.0%
No light →Full light
0(0%)
0
65535
0.0%
100.0%
Intensity fade, fine (LSB)
3
Red 1
0
255
0.0%
100.0%
No light →Full red 1
0(0%)
0
65535
0.0%
100.0%
Red 1, fine (LSB)
4
Green 1
0
255
0.0%
100.0%
No light →Full green 1
0(0%)
0
65535
0.0%
100.0%
Green 1, fine (LSB)
5
Blue 1
0
255
0.0%
100.0%
No light →Full blue 1
0(0%)
0
65535
0.0%
100.0%
Blue 1, fine (LSB)
6
White 1
0
255
0.0%
100.0%
No light →Full white 1
0(0%)
0
65535
0.0%
100.0%
White 1, fine (LSB)
7
Red 2
0
255
0.0%
100.0%
No light →Full red 2
0(0%)
0
65535
0.0%
100.0%
Red 2, fine (LSB)
8
Green 2
0
255
0.0%
100.0%
No light →Full green 2
0(0%)
0
65535
0.0%
100.0%
Green 2, fine (LSB)
9
Blue 2
0
255
0.0%
100.0%
No light →Full blue 2
0(0%)
0
65535
0.0%
100.0%
Blue 2, fine (LSB)
10
White 2
0
255
0.0%
100.0%
No light →Full white 2
0(0%)
0
65535
0.0%
100.0%
White 2, fine (LSB)
11
Red 3
0
255
0.0%
100.0%
No light →Full red 3
0(0%)
0
65535
0.0%
100.0%
Red 3, fine (LSB)
12
Green 3
0
255
0.0%
100.0%
No light →Full green 3
0(0%)
0
65535
0.0%
100.0%
Green 3, fine (LSB)
13
Blue 3
0
255
0.0%
100.0%
No light →Full blue 3
0(0%)
0
65535
0.0%
100.0%
Blue 3, fine (LSB)
14
White 3
0
255
0.0%
100.0%
No light →Full white 3
0(0%)
0
65535
0.0%
100.0%
White 3, fine (LSB)
15
Red 4
0
255
0.0%
100.0%
No light →Full red 4
0(0%)

GTD-LMZ1537 User Manual
13
Standard
(25ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
0
65535
0.0%
100.0%
Red 4, fine (LSB)
16
Green 4
0
255
0.0%
100.0%
No light →Full green 4
0(0%)
0
65535
0.0%
100.0%
Green 4, fine (LSB)
17
Blue 4
0
255
0.0%
100.0%
No light →Full blue 4
0(0%)
0
65535
0.0%
100.0%
Blue 4, fine (LSB)
18
White 4
0
255
0.0%
100.0%
No light →Full white 4
0(0%)
0
65535
0.0%
100.0%
White 4, fine (LSB)
19
Rainbow Function
0
9
0.0%
3.5%
No function
0(0%)
10
39
3.9%
15.3%
Rainbow scene 1
40
71
15.7%
27.8%
Rainbow scene 2
72
103
28.2%
40.4%
Rainbow scene 3
104
135
40.8%
52.9%
Rainbow scene 4
136
167
53.3%
65.5%
Rainbow scene 5
168
199
65.9%
78.0%
Rainbow scene 6
200
231
78.4%
90.6%
Rainbow scene 7
232
255
91.0%
100.0%
Rainbow flow from slow to fast
20
Color temperature
0
24
0.0%
9.4%
No function
0(0%)
25
35
9.8%
13.7%
3200K
36
46
14.1%
18.0%
3400K
47
57
18.4%
22.4%
3600K
58
68
22.7%
26.7%
3800K
69
79
27.1%
31.0%
4000K
80
90
31.4%
35.3%
4200K
91
101
35.7%
39.6%
4400K
102
112
40.0%
43.9%
4600K
113
123
44.3%
48.2%
4800K
124
134
48.6%
52.5%
5000K
135
145
52.9%
56.9%
5200K
146
156
57.3%
61.2%
5400K
157
167
61.6%
65.5%
5600K
168
178
65.9%
69.8%
5800K
179
189
70.2%
74.1%
6000K
190
200
74.5%
78.4%
6200K
201
211
78.8%
82.7%
6400K
212
222
83.1%
87.1%
6600K
223
233
87.5%
91.4%
6800K
234
244
91.8%
95.7%
7000K
245
255
96.1%
100.0%
7200K
21
Zoom
0
255
0.0%
100.0%
Near →Far
0(0%)

GTD-LMZ1537 User Manual
14
Standard
(25ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
0
65535
0.0%
100.0%
Zoom, fine (LSB)
22
Pan
0
255
0.0%
100.0%
Pan
0(0%)
0
65535
0.0%
100.0%
Pan, fine (LSB)
23
Tilt
0
255
0.0%
100.0%
Tilt
46(18.0%)
0
65535
0.0%
100.0%
Tilt, fine (LSB)
24
Scan speed
0
255
0.0%
100.0%
Scan speed from fast to slow
0(0%)
25
Special controls
0
9
0.0%
3.5%
No function
0(0%)
10
19
3.9%
7.5%
No function
20
29
7.8%
11.4%
No function
30
39
11.8%
15.3%
No function
40
49
15.7%
19.2%
No function
50
59
19.6%
23.1%
No function
60
69
23.5%
27.1%
Reset all motor after 5 seconds
70
79
27.5%
31.0%
Scan motor reset after 5 seconds
80
89
31.4%
34.9%
No function
90
99
35.3%
38.8%
No function
100
109
39.2%
42.7%
No function
110
119
43.1%
46.7%
Zoom motor reset after 5 seconds
120
129
47.1%
50.6%
Built-in program 1
130
139
51.0%
54.5%
Built-in program 2
140
149
54.9%
58.4%
Built-in program 3
150
159
58.8%
62.4%
Built-in program 4
160
169
62.7%
66.3%
Built-in program 5
170
179
66.7%
70.2%
Built-in program 6
180
189
70.6%
74.1%
Built-in program 7
190
199
74.5%
78.0%
Built-in program 8
200
209
78.4%
82.0%
Built-in program 9
210
219
82.4%
85.9%
Built-in program 10
220
255
86.3%
100.0%
Voice control
DMX protocol - Basic [21channels]
Basic
(21ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
1
Strobe/Shutter
0
31
0.0%
12.2%
Closed
0(0%)
32
63
12.5%
24.7%
Open
64
127
25.1%
49.8%
Synchronous strobe from slow to fast
128
159
50.2%
62.4%
Open
160
223
62.7%
87.5%
Random strobe from slow to fast
224
255
87.8%
100.0%
Open

GTD-LMZ1537 User Manual
15
Basic
(21ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
2
Intensity
0
255
0.0%
100.0%
No light →Full light
0(0%)
3
0
65535
0.0%
100.0%
Intensity fade, fine (LSB)
4
Total Red
0
255
0.0%
100.0%
No light →Full total red
0(0%)
5
0
65535
0.0%
100.0%
Total red, fine (LSB)
0(0%)
6
Total Green
0
255
0.0%
100.0%
No light →Full total green
0(0%)
7
0
65535
0.0%
100.0%
Total green, fine (LSB)
0(0%)
8
Total Blue
0
255
0.0%
100.0%
No light →Full total blue
0(0%)
9
0
65535
0.0%
100.0%
Total blue, fine (LSB)
0(0%)
10
Total White
0
255
0.0%
100.0%
No light →Full total white
0(0%)
11
0
65535
0.0%
100.0%
Total white, fine (LSB)
0(0%)
12
Rainbow Function
0
9
0.0%
3.5%
No function
0(0%)
10
39
3.9%
15.3%
Rainbow scene 1
40
71
15.7%
27.8%
Rainbow scene 2
72
103
28.2%
40.4%
Rainbow scene 3
104
135
40.8%
52.9%
Rainbow scene 4
136
167
53.3%
65.5%
Rainbow scene 5
168
199
65.9%
78.0%
Rainbow scene 6
200
231
78.4%
90.6%
Rainbow scene 7
232
255
91.0%
100.0%
Rainbow flow from slow to fast
13
Color temperature
0
24
0.0%
9.4%
No function
0(0%)
25
35
9.8%
13.7%
3200K
36
46
14.1%
18.0%
3400K
47
57
18.4%
22.4%
3600K
58
68
22.7%
26.7%
3800K
69
79
27.1%
31.0%
4000K
80
90
31.4%
35.3%
4200K
91
101
35.7%
39.6%
4400K
102
112
40.0%
43.9%
4600K
113
123
44.3%
48.2%
4800K
124
134
48.6%
52.5%
5000K
135
145
52.9%
56.9%
5200K
146
156
57.3%
61.2%
5400K
157
167
61.6%
65.5%
5600K
168
178
65.9%
69.8%
5800K
179
189
70.2%
74.1%
6000K
190
200
74.5%
78.4%
6200K
201
211
78.8%
82.7%
6400K
212
222
83.1%
87.1%
6600K
223
233
87.5%
91.4%
6800K

GTD-LMZ1537 User Manual
16
Basic
(21ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
234
244
91.8%
95.7%
7000K
245
255
96.1%
100.0%
7200K
14
Zoom
0
255
0.0%
100.0%
Near →Far
0(0%)
15
0
65535
0.0%
100.0%
Zoom, fine (LSB)
16
Pan
0
255
0.0%
100.0%
Pan
0(0%)
17
0
65535
0.0%
100.0%
Pan, fine (LSB)
18
Tilt
0
255
0.0%
100.0%
Tilt
46(18.0%)
19
0
65535
0.0%
100.0%
Tilt, fine (LSB)
20
Scan speed
0
255
0.0%
100.0%
Scan speed from fast to slow
0(0%)
21
Special controls
0
9
0.0%
3.5%
No function
0(0%)
10
19
3.9%
7.5%
No function
20
29
7.8%
11.4%
No function
30
39
11.8%
15.3%
No function
40
49
15.7%
19.2%
No function
50
59
19.6%
23.1%
No function
60
69
23.5%
27.1%
Reset all motor after 5 seconds
70
79
27.5%
31.0%
Scan motor reset after 5 seconds
80
89
31.4%
34.9%
No function
90
99
35.3%
38.8%
No function
100
109
39.2%
42.7%
No function
110
119
43.1%
46.7%
Zoom motor reset after 5 seconds
120
129
47.1%
50.6%
Built-in program 1
130
139
51.0%
54.5%
Built-in program 2
140
149
54.9%
58.4%
Built-in program 3
150
159
58.8%
62.4%
Built-in program 4
160
169
62.7%
66.3%
Built-in program 5
170
179
66.7%
70.2%
Built-in program 6
180
189
70.6%
74.1%
Built-in program 7
190
199
74.5%
78.0%
Built-in program 8
200
209
78.4%
82.0%
Built-in program 9
210
219
82.4%
85.9%
Built-in program 10
220
255
86.3%
100.0%
Voice control
DMX protocol - Extended [45 channels]
Extended
(45ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
1
Strobe/Shutter
0
31
0.0%
12.2%
Closed
0(0%)
32
63
12.5%
24.7%
Open
64
127
25.1%
49.8%
Synchronous strobe from slow to fast

GTD-LMZ1537 User Manual
17
Extended
(45ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
128
159
50.2%
62.4%
Open
160
223
62.7%
87.5%
Random strobe from slow to fast
224
255
87.8%
100.0%
Open
2
Intensity
0
255
0.0%
100.0%
No light →Full light
0(0%)
3
0
65535
0.0%
100.0%
Intensity fade, fine (LSB)
4
Red 1
0
255
0.0%
100.0%
No light →Full red 1
0(0%)
5
0
65535
0.0%
100.0%
Red 1, fine (LSB)
6
Green 1
0
255
0.0%
100.0%
No light →Full green 1
0(0%)
7
0
65535
0.0%
100.0%
Green 1, fine (LSB)
8
Blue 1
0
255
0.0%
100.0%
No light →Full blue 1
0(0%)
9
0
65535
0.0%
100.0%
Blue 1, fine (LSB)
10
White 1
0
255
0.0%
100.0%
No light →Full white 1
0(0%)
11
0
65535
0.0%
100.0%
White 1, fine (LSB)
12
Red 2
0
255
0.0%
100.0%
No light →Full red 2
0(0%)
13
0
65535
0.0%
100.0%
Red 2, fine (LSB)
14
Green 2
0
255
0.0%
100.0%
No light →Full green 2
0(0%)
15
0
65535
0.0%
100.0%
Green 2, fine (LSB)
16
Blue 2
0
255
0.0%
100.0%
No light →Full blue 2
0(0%)
17
0
65535
0.0%
100.0%
Blue 2, fine (LSB)
18
White 2
0
255
0.0%
100.0%
No light →Full white 2
0(0%)
19
0
65535
0.0%
100.0%
White 2, fine (LSB)
20
Red 3
0
255
0.0%
100.0%
No light →Full red 3
0(0%)
21
0
65535
0.0%
100.0%
Red 3, fine (LSB)
22
Green 3
0
255
0.0%
100.0%
No light →Full green 3
0(0%)
23
0
65535
0.0%
100.0%
Green 3, fine (LSB)
24
Blue 3
0
255
0.0%
100.0%
No light →Full blue 3
0(0%)
25
0
65535
0.0%
100.0%
Blue 3, fine (LSB)
26
White 3
0
255
0.0%
100.0%
No light →Full white 3
0(0%)
27
0
65535
0.0%
100.0%
White 3, fine (LSB)
28
Red 4
0
255
0.0%
100.0%
No light →Full red 4
0(0%)
29
0
65535
0.0%
100.0%
Red 4, fine (LSB)
30
Green 4
0
255
0.0%
100.0%
No light →Full green 4
0(0%)
31
0
65535
0.0%
100.0%
Green 4, fine (LSB)
32
Blue 4
0
255
0.0%
100.0%
No light →Full blue 4
0(0%)
33
0
65535
0.0%
100.0%
Blue 4, fine (LSB)
34
White 4
0
255
0.0%
100.0%
No light →Full white 4
0(0%)
35
0
65535
0.0%
100.0%
White 4, fine (LSB)
36
Rainbow Function
0
9
0.0%
3.5%
No function
0(0%)
10
39
3.9%
15.3%
Rainbow scene 1

GTD-LMZ1537 User Manual
18
Extended
(45ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
40
71
15.7%
27.8%
Rainbow scene 2
72
103
28.2%
40.4%
Rainbow scene 3
104
135
40.8%
52.9%
Rainbow scene 4
136
167
53.3%
65.5%
Rainbow scene 5
168
199
65.9%
78.0%
Rainbow scene 6
200
231
78.4%
90.6%
Rainbow scene 7
232
255
91.0%
100.0%
Rainbow flow from slow to fast
37
Color temperature
0
24
0.0%
9.4%
No function
0(0%)
25
35
9.8%
13.7%
3200K
36
46
14.1%
18.0%
3400K
47
57
18.4%
22.4%
3600K
58
68
22.7%
26.7%
3800K
69
79
27.1%
31.0%
4000K
80
90
31.4%
35.3%
4200K
91
101
35.7%
39.6%
4400K
102
112
40.0%
43.9%
4600K
113
123
44.3%
48.2%
4800K
124
134
48.6%
52.5%
5000K
135
145
52.9%
56.9%
5200K
146
156
57.3%
61.2%
5400K
157
167
61.6%
65.5%
5600K
168
178
65.9%
69.8%
5800K
179
189
70.2%
74.1%
6000K
190
200
74.5%
78.4%
6200K
201
211
78.8%
82.7%
6400K
212
222
83.1%
87.1%
6600K
223
233
87.5%
91.4%
6800K
234
244
91.8%
95.7%
7000K
245
255
96.1%
100.0%
7200K
38
Zoom
0
255
0.0%
100.0%
Near →Far
0(0%)
39
0
65535
0.0%
100.0%
Zoom, fine (LSB)
40
Pan
0
255
0.0%
100.0%
Pan
0(0%)
41
0
65535
0.0%
100.0%
Pan, fine (LSB)
42
Tilt
0
255
0.0%
100.0%
Tilt
46(18.0%)
43
0
65535
0.0%
100.0%
Tilt, fine (LSB)
44
Scan speed
0
255
0.0%
100.0%
Scan speed from fast to slow
0(0%)
45
Special controls
0
9
0.0%
3.5%
No function
0(0%)
10
19
3.9%
7.5%
No function
20
29
7.8%
11.4%
No function

GTD-LMZ1537 User Manual
19
Extended
(45ch)
Name
DMX value
DMX percentage
Function
Default
DMX Value
30
39
11.8%
15.3%
No function
40
49
15.7%
19.2%
No function
50
59
19.6%
23.1%
No function
60
69
23.5%
27.1%
Reset all motor after 5 seconds
70
79
27.5%
31.0%
Scan motor reset after 5 seconds
80
89
31.4%
34.9%
No function
90
99
35.3%
38.8%
No function
100
109
39.2%
42.7%
No function
110
119
43.1%
46.7%
Zoom motor reset after 5 seconds
120
129
47.1%
50.6%
Built-in program 1
130
139
51.0%
54.5%
Built-in program 2
140
149
54.9%
58.4%
Built-in program 3
150
159
58.8%
62.4%
Built-in program 4
160
169
62.7%
66.3%
Built-in program 5
170
179
66.7%
70.2%
Built-in program 6
180
189
70.6%
74.1%
Built-in program 7
190
199
74.5%
78.0%
Built-in program 8
200
209
78.4%
82.0%
Built-in program 9
210
219
82.4%
85.9%
Built-in program 10
220
255
86.3%
100.0%
Voice control
Notes
Do not switch off the fixture within the first minute after switching on. Wait for at least 5 minutes to switch on the fixture.
Technical specification
Optical
Light source: 15W (RGBW 4-in-1), quantity: 37pcs
Expected average lifetime: 50000 hours
Beam angle (zoom): 9°- 25°(50% peak angle), 15° - 48°(10% peak angle)
Photometric
Total Output (Lumen): 14400 lumens narrow / 12600 lumens wide
Color temperature: 3200K-7200K linear regulation
Electrical
Power input, nominal: AC 100-240V - 50/60Hz
Max. Power consumption: 576W, max current: 5.77A, PF≥0.95
Power supply unit: Auto-ranging electronic SMPS
Main fuse: 250V/6.3A