Guardian 10736 User manual

BUNGEE TOOL TETHER
Part # 
Contents
2 Important Notes
2 Applicable Safety Standards
2 Safety Information
3 Installation
4 Specifications and Materials
Instruction Manual
Do not throw instructions away.
Read and understand instructions before
using this equipment.
A

Important Notes
Tool tethers are suitable only for hand
tools weighing the specified weight
rating or less that have manufacturer’s
intended attachment features, such as
Stronghold attachment point products,
rings or holes, that can be properly
secured with the various tether end types.
This product is intended for use
by personnel who are trained
and knowledgeable regarding
working with hand tools at height
and/or near machinery.
Inspect before each use for
damage and proper function:
1. Check all hardware for abrasion,
deformity, cuts and sharp edges.
2. Check for tears, cuts, fraying, abrasion,
discoloration, burns, holes, mold,
unsplicing, pulled or broken stitches,
or other signs of wear or damage.
3. For coil style products for cracks,
slits, stress risers or lack of retraction
memory in coil material.
4. Do not use and always quarantine if
any of the above apply or if damaged
or not functioning correctly.
Tool tethers should only be attached
to anchors (i.e. belts and harnesses)
that have manufacturer’s intended
attachment specifications.
Tool tethers are not intended for use on the
wrist.
Applicable Safety Standards
Meets or exceeds:
ANSI / ISEA 121-2018
Safety Information
WARNING!Do not use near
moving parts, mechanisms, running
machinery or rotating equipment.
May contain electrically
conductive materials.
Do not alter product in any way
from its original state.
Use only with tools that are
specifically designed for tethering,
or by using appropriate Stronghold
brand attachment products.
2

Installation
Carabiner Ends
Hook or cinch carabiners as shown.
Ensure carabiners are closed and remain
locked and/or tight throughout use.
Corded Ends
Cinch cord as shown.
Always cinch corded ends, never wrap.
3

Specifications
Bungee Style Tool Tethers
Part # Max Tool Weight Tether Length Clearance Distance*
10736 15 lbs (6.8 kg) 52” (132 cm) 52” (132 cm)
*To determine how far a tool could fall before stopping add clearance distance of all products used.
4
Materials
Nylon and zinc-plated steel
Maintenance, Cleaning, and Storage
Clean with a damp cloth and mild soap, wipe o excess and thoroughly dry.
Store this product away from tools and other objects that could cause damage.
+   
[email protected]
607 East Sam Houston Parkway South, Suite 800
Pasadena, TX 77503
guardianfall.com
Guardian® and its logo are registered trademarks of Guardian Fall, Inc. in the US and other countries.