Guardian EyeSafe G1100 Installation and operating instructions

Guardian Equipment 312 447 8100 TELEPHONE
1140 N North Branch St 312 447 8101 FACSIMILE
Chicago, IL 60642 gesafety.com
Parts List
G1100/G1101 EyeSafe™ Faucet Mounted Eyewashes
A
A
B
E
B C D
Valve Components
A600-664R Actuating Knob (pkg of 2)
B600-628R Inlet O-Ring (pkg of 2)
CAP600-666 Valve Stem with O-Rings and Spring
DAP600-665 Diverter with O-Rings
E450-005 Outlet Aerator Assembly
G1100 Components
A250-046R Dust Cover with Strap (pkg of 2)
BAP450-110R Aerator Assembly (pkg of 2)
G1101 Components
A250-046R Dust Cover with Strap (pkg of 2)
BAP450-110R Aerator Assembly (pkg of 2)
Inlet Adapters (included with unit)
AP400-009 (1) 15/16”-27 Male Adapter with O-Ring,
(1) 13/16”-27 Male Adapter with O-Ring,
(1) 3/8” NPS Male Adapter with O-Ring
Additional Adapters (ordered separately)
AP400-012 (1) 13/16”-24 Female Adapter with O-Ring
AP400-015 (1) 3/4” Female Hose Adapter with O-Ring
A
B
rev. 0418 / © 2018 Guardian Equipment

Guardian Equipment 312 447 8100 TELEPHONE
1140 N North Branch St 312 447 8101 FACSIMILE
Chicago, IL 60642 gesafety.com
Installation, Operation and Maintenance
G1100/G1101 EyeSafe™ Faucet Mounted Eyewashes
rev. 0418 / © 2018 Guardian Equipment
Installation
1. Remove present aerator or other fitting from faucet outlet.
2. Mount the EyeSafe™ unit to faucet spout. The EyeSafe™ inlet has a 55/64”-27 female thread.
Note: Due to the variety of faucets, it may be necessary to use an adapter to mount the EyeSafe™ unit on the
faucet spout. Three adapters are furnished with the unit; a larger adapter with 15/16”-27 thread size to fit
Delta and American Standard faucets, a smaller adapter with 13/16”-27 thread size to fit Kohler and other
faucets, and a 3/8” NPS adapter to fit WaterSaver faucets. Important: When mounting EyeSafe™ unit to
faucet, be careful not to overtighten adapter.
3. If necessary, use a 13/16” or adjustable wrench to adjust the angle of the outlet heads to obtain the desired
angle for the eyewash water flow.
4. Attach the enclosed sign to wall or backsplash behind sink.
Use
1. Turn on cold water side of faucet. Important: Use only cold water when EyeSafe™ unit is in operation. Hot water
may cause scalding or other injury.
2. Pull knob on EyeSafe™ unit forward to activate the eyewash. Water pressure will hold the eyewash in
operation, thus leaving the user’s hands free.
3. To return to normal faucet operation, push knob back to original position.
Note: When the faucet is turned off during eyewash activation, the pull-knob will return to original position
automatically.
Maintenance
1. Periodic cleaning of the eyewash aerators is advisable to assure proper water flow.
2. Keep plastic float-off covers on outlet heads when the unit is not in use.
3. The EyeSafe™ unit, like all emergency eyewash and shower equipment, should be tested weekly.