HIK VISION DS-2TD6537T-50H4LX/W User manual

Explosion-Proof Thermal Bi-Spectrum
Network Positioning System
Quick Start Guide

Thermal Network Positioning System·Quick Start Guide
ii
Legal Information
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version of this Manual at the
Hikvision website (https://www.hikvision.com).
Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.
Trademarks Acknowledgement
and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF
THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT
SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND
YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

Thermal Network Positioning System·Quick Start Guide
iii
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR
DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT
FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL
OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,
THE LATTER PREVAILS.
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/EU, the ATEX Directive 2014/34/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to

Thermal Network Positioning System·Quick Start Guide
iv
your supplier or to a designated collection point. For more information see:
www.recyclethis.info.
Intended use of the camera
Ex mark:
Hazardous Area Classification: Zone 1, Zone 2, Zone 21, Zone 22.
IP Degree: IP68 (2m, 2h)
Ex Standards:
IEC 60079-0: 2017
EN IEC 60079-0: 2018
IEC 60079-1: 2014
EN 60079-1: 2014
IEC 60079-28: 2015
EN IEC 60079-0: 2018
IEC 60079-31: 2013
EN 60079-31: 2014
Special Conditions for Safe Use:
1.Ambient Temperature: -40°C to 60°C.
2.The width of flameproof joint is more than the minimum values specified in
IEC60079-1 standard. If needed, repair of the flameproof joints must only be made in
compliance with the structural specifications provided by the manufacturer. Repairs
must not be made on the basis of values specified in table 4 of IEC60079-1:2014.
3.When installation, the free end of the composite cable should be taken into the inside
of the end-equipment enclosure that is Ex apparatus, or safety area.
4.For type DS-2TD6566TF-*/** Explosion-proof thermal bi-spectrum network
positioning system, When installation, the free end of the composite cable with fiber
should be taken into the inside of the end-equipment enclosure that is Ex apparatus,
or the electrical Ex components (e.g. fiber optic terminal devices), or safety area.
5.DO NOT OPEN WHEN ENERGIZED.
6.USE FASTENERS WITH YIELD STRESS ≥450 MPa.
Industry Canada ICES-003 Compliance

Thermal Network Positioning System·Quick Start Guide
v
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
Grounding:
The both internal and external earthing shall be connected reliably.
Ground wire cross-sectional area of not less than the phase connector cross-sectional
area level, at least 4 mm².
The device should be used in compliance with local laws and electrical safety
regulations. Refer to the appropriate documentation for detailed information.
The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low
Voltage) and the Limited Power Source (85 to 265 VAC). Refer to the appropriate
documentation for detailed information.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire
hazards caused by overload.
Make sure the plug is properly connected to the power socket.
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
The installer and user are responsible for password and security configuration and its
settings.
Both internal and external grounds should be connected properly. (The cross section
area of the grounding wire must be no less than 4 mm², and no less than that of the
phase connector).
For permanently connected equipment the disconnect device shall be incorporated in
the equipment, unless the equipment is accompanied by installation instructions
stating that an appropriate disconnect device shall be provided as part of the building
installation.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.

Thermal Network Positioning System·Quick Start Guide
vi
Cautions
To ensure explosion-proof performance, do not damage explosion-proof surface
Do not drop the device or subject it to physical shock.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
Do not aim the lens at the sun or any other bright light.
When any laser equipment is in use, make sure that the device lens is not exposed to
the laser beam, or it may burn out.
Do not expose the device to high electromagnetic radiation or extremely hot, cold,
dusty, or damp environments.
Place the device in a dry and well-ventilated environment.
Keep non-waterproof devices away from liquids.
Keep the device in original or similar packaging while transporting it.
A few device components (e.g., electrolytic capacitor) require regular replacement.
The average lifespan varies, so periodic checking is recommended. Contact your
dealer for details.
Improper use or replacement of the battery may result in explosion hazard. Replace
with the same or equivalent type only. Dispose of used batteries in conformance with
the instructions provided by the battery manufacturer.
Never attempt to disassemble the device.
Ex structure instruction
We have made adequate consideration in flameproof enclosure design of the
explosion-proof camera to prevent explosive gases getting into the inner volume, the
explosion inside the enclosure cannot cause the explosion of the external explosive
gases. We ensure the explosion-proof performance by strengthen enclosure the
strength, adjust the length and gap of the joint of associate components and limit the
maximum surface temperature.
The enclosure is able to subject to static pressure test (1.5 times of reference pressure
for at least 10s) specified in EN60079-01/IEC60079-1, no leakage or deformation
allowed after test.
The maximum surface temperature will no more than 80ºC in normal operation.
Tempering glass is adopted in observation port, the tempering glass shall pass the
impact and thermal shock test.
Protection the flameproof surface in maintaining of this product, otherwise the
damaged flameproof surface will affect the Explosion-proof performance.

Thermal Network Positioning System·Quick Start Guide
vii

Thermal Network Positioning System·Quick Start Guide
viii
Table of Contents
1 Introduction.................................................................................................1
1.1 Overview.................................................................................................................. 1
1.2 Model Description ................................................................................................... 1
2 Preparation ..................................................................................................4
3 Appearance Description ...............................................................................5
3.1 Positioning System Appearance............................................................................... 5
3.2 Cable Descriptions ................................................................................................... 5
3.3 Alarm In/Out Connections....................................................................................... 6
4 Installing the Positioning System..................................................................8
4.1 Monitoring Distance Range ..................................................................................... 8
4.2 Wiring...................................................................................................................... 8
4.3 Bracket Installation.................................................................................................. 9
4.4 Explosion-proof Tube Installaion (without fiber) ................................................... 11
4.5 Explosion-proof control box(ATEX/IECEx certificates ) Installation (without fiber) 12
4.6 Explosion-proof control box(ATEX/IECEx certificates ) Installation (with fiber) ..... 14
4.7 Finishing Installing ................................................................................................. 15
5 Setting the System over the LAN ................................................................16
5.1 Wiring.................................................................................................................... 16
5.2 Activating the System ............................................................................................ 16
5.2.1 Activation via Web Browser ............................................................................ 16
5.2.2 Activation via SADP Software...........................................................................17
5.3 Modifying the IP Address....................................................................................... 18
6 Operating via Web browser........................................................................20
6.1 Accessing the System............................................................................................. 20
6.2 Live View Page....................................................................................................... 21
Appendix ......................................................................................................23
Frequently Asked Questions (FAQ) .............................................................................. 23
Device Running Error ............................................................................................... 23
Device Upgrading ..................................................................................................... 23
Others ...................................................................................................................... 23
Common Material Emissivity Reference...................................................................... 25

Thermal Network Positioning System·Quick Start Guide
1
1Introduction
1.1 Overview
Explosion-Proof Thermal Bi-spectrum Network Positioning System is a surveillance
product capable of video/audio collecting, smart encoding and network transmitting. It
adopts an embedded system and a high-performed hardware process platform to
achieve good stability and reliability.
You can visit and configure your camera via web browser and client software.
Explosion-Proof Thermal Bi-spectrum Network Positioning System adopts a stainless
steel enclosure, receiving an IP68 rating for ingress protection.
The camera is designed and manufactured according to EN IEC60079-0:2018, EN60079-1:
2014, EN60079-28: 2015, EN60079-31: 2014, IEC60079-0: 2017, IEC60079-1: 2014,
IEC60079-28: 2015, IEC60079-31: 2013.All associate technical document, drawings and
samples of the camera are tested and certified by China National Quality Supervision
and Test Center for Explosion Protected Electrical Apparatus (CQST), ATEX certification
number: CNEX 19 ATEX 0040X and IECEx certification number is IECEx CNEX
19.0030X.
Application Scenarios: oil industry, mine fields, chemical industry, port, grain processing
industry, etc.
1.2 Model Description

Thermal Network Positioning System·Quick Start Guide
2
Explanation of model naming:
Lens focal length (mm):
25: 25 mm; 50: 50 mm
DS-2 T D 6 5 X X/XT
Hikvision front-end product
For specialized application
Thermal camera
Shape:
6: Positioning System
Max. Resolution (MP): 6: 0.3 MP
Stands for Thermal camera module component performance
T: Accurate temperature measurement
- X X
Explosion-proof camera
XX X /X
IR Light
Optical Max. Resolution (MP):
2: 2 MP; 5:5MP
Optical camera module component type
Software Platform
Figure 1-1 Model Explanation
Models:
DS-2TD6566T-25H2LX/V2, DS-2TD6566T-50H2LX/V2,
DS-2TD6566T-25H2LX/V2UHK, DS-2TD6566T-25H2LX/V2CKV,
DS-2TD6566T-25H2LX/V2UVS, DS-2TD6566T-25H2LX/V2KVO,
DS-2TD6566T-25H2LX/V2HUN, DS-2TD6566T-50H2LX/V2UHK,
DS-2TD6566T-50H2LX/V2CKV, DS-2TD6566T-50H2LX/V2UVS,
DS-2TD6566T-50H2LX/V2KVO, DS-2TD6566T-50H2LX/V2HUN (Main cylinder normal
without fiber)
DS-2TD6566T-25H2LX/W, DS-2TD6566T-50H2LX/W,
DS-2TD6566T-25H2LX/WUHK, DS-2TD6566T-25H2LX/WCKV,
DS-2TD6566T-25H2LX/WUVS, DS-2TD6566T-25H2LX/WKVO,
DS-2TD6566T-25H2LX/WHUN, DS-2TD6566T-50H2LX/WUHK,
DS-2TD6566T-50H2LX/WCKV, DS-2TD6566T-50H2LX/WUVS,