HIK VISION DS-MI9605-GA Series User manual

Mobile Enforcement System User Manual
0
DS-MI9605-GA Series Mobile Enforcement System
User Manual

Mobile Enforcement System User Manual
Quick Start Guide
COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Mobile Enforcement System.
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Mobile Enforcement System User Manual
1
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This product generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU, the R&TTE Directive 1999/5/EC.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info

Mobile Enforcement System User Manual
2
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.

Mobile Enforcement System User Manual
3
Applicable Models
This manual is applicable to DS-MI9605-GA.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

Mobile Enforcement System User Manual
4
Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with
the same or equivalent type only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.

Mobile Enforcement System User Manual
5
TABLE OF CONTENTS
Chapter 1 Introduction ................................................................................................................... 8
1.1 Overview ............................................................................................................................. 8
1.2 Main Features...................................................................................................................... 8
Chapter 2 Assembly Parts Introduction .......................................................................................... 9
2.1 Package List ......................................................................................................................... 9
2.2 Panel Description............................................................................................................... 10
2.2.1 Front Panel ............................................................................................................... 10
2.2.2 Rear Panel................................................................................................................. 11
2.3 Manual Controller Introduction ......................................................................................... 12
Chapter 3 Installation ................................................................................................................... 15
3.1 Install HDD......................................................................................................................... 15
3.2 Install SIM Card.................................................................................................................. 17
Chapter 4 Menu Operation........................................................................................................... 20
4.1 Enter Main Menu............................................................................................................... 20
4.2 Enter Sub-Menu ................................................................................................................ 20
4.3 Edit Parameters ................................................................................................................. 21
4.4 Exit Menu .......................................................................................................................... 21
4.5 Positioning Cursor on an Item ............................................................................................ 21
4.6 Check a Checkbox .............................................................................................................. 22
4.7 Edit Dropdown List ............................................................................................................ 22
4.8 Edit a Text field .................................................................................................................. 22
4.9 Save/Cancel Settings.......................................................................................................... 22
Chapter 5 Start Up Device............................................................................................................. 23
5.1 Startup .............................................................................................................................. 23
5.2 Set Admin Password .......................................................................................................... 23
Chapter 6 Network ....................................................................................................................... 24
6.1 Local Network Settings ...................................................................................................... 24
6.2 Dialing Settings .................................................................................................................. 24
6.3 Firewall Settings ................................................................................................................ 25
Chapter 7 IP Camera ..................................................................................................................... 27
7.1 Activate IP Camera............................................................................................................. 27
7.2 Automatically Add IP Camera............................................................................................. 27
7.3 Manually Add IP Cameras .................................................................................................. 28
7.3.1 Quick Add ................................................................................................................. 28
7.3.2 Manual Add .............................................................................................................. 29
7.4 Edit IP Camera ................................................................................................................... 29
7.4.1 Edit Added IP Camera................................................................................................ 29
7.4.2 Edit Un-Added IP Camera .......................................................................................... 30
7.5 Delete IP Cameras.............................................................................................................. 30
Chapter 8 Camera Management................................................................................................... 31
8.1 OSD Settings ...................................................................................................................... 31

Mobile Enforcement System User Manual
6
8.2 Road Name Overlay ........................................................................................................... 31
Chapter 9 Live View...................................................................................................................... 33
9.1 PTZ Control Settings........................................................................................................... 33
9.2 PTZ Operations .................................................................................................................. 33
9.2.1 PTZ Parameters ......................................................................................................... 33
9.2.2 Preset Settings .......................................................................................................... 36
Chapter 10 HDD Management...................................................................................................... 38
10.1.1 Format HDD ............................................................................................................ 38
10.1.2 Set Overwrite Mode................................................................................................ 38
10.1.3 View S.M.A.R.T Information .................................................................................... 39
Chapter 11 Recording and Capture ............................................................................................... 40
11.1 Record Parameters .......................................................................................................... 40
11.2 All-Day Recording ............................................................................................................ 40
11.3 Manual Recording............................................................................................................ 41
11.4 Manual Capture............................................................................................................... 41
Chapter 12 Traffic Violation Operations ....................................................................................... 42
12.1 Traffic Violation Recording............................................................................................... 42
12.1.1 Set Traffic Violation................................................................................................. 42
12.1.2 Start Traffic Violation Recording.............................................................................. 42
12.2 Traffic Violation Capture .................................................................................................. 43
12.2.1 Set Traffic Violation Capture Parameters ................................................................. 43
12.2.2 Capture Traffic Violation Pictures ............................................................................ 44
12.3 Picture Comparison ......................................................................................................... 44
12.3.1 Picture Composition Parameters ............................................................................. 44
12.3.2 Start Picture Composition ....................................................................................... 45
Chapter 13 Playback ..................................................................................................................... 46
Chapter 14 Platform ..................................................................................................................... 48
Chapter 15 Backup........................................................................................................................ 49
Chapter 16 Events and Alarms...................................................................................................... 50
16.1 Exception Settings ........................................................................................................... 50
16.2 Alarm Input Settings ........................................................................................................ 50
16.3 Alarm Output Settings ..................................................................................................... 51
16.4 Speeding Alarm ............................................................................................................... 52
Chapter 17 User Account Management........................................................................................ 54
Chapter 18 General System Configuration.................................................................................... 55
18.1 Touchscreen Settings ....................................................................................................... 55
18.2 GPS Settings .................................................................................................................... 55
18.3 Configure Basic Display Settings....................................................................................... 56
18.4 Configure DST Settings..................................................................................................... 56
18.5 Configure Advanced Display Settings ............................................................................... 57
Chapter 19 Maintenance .............................................................................................................. 59
19.1 View Status ..................................................................................................................... 59
19.2 System Information ......................................................................................................... 59

Mobile Enforcement System User Manual
7
19.3 Log Management............................................................................................................. 59
19.3.1 Search Log .............................................................................................................. 60
19.3.2 Export Log............................................................................................................... 60
19.4 Upgrade System............................................................................................................... 61
19.4.1 Upgrade by USB device ........................................................................................... 61
19.4.2 Upgrade by FTP ....................................................................................................... 62
19.5 Restore Default Settings................................................................................................... 63
19.6 Import/Export Configuration Files ................................................................................... 63
19.7 RS-232 Serial Port Settings ............................................................................................... 64
Chapter 20 Shutdown ................................................................................................................... 66
20.1 Boot Settings ................................................................................................................... 66
20.1.1 Shutdown Delay ...................................................................................................... 66
20.1.2 Timing On/Off......................................................................................................... 66
20.2 Manual Shutdown ........................................................................................................... 67
Chapter 21 Appendix .................................................................................................................... 68
21.1 HDD Storage Chart........................................................................................................... 68
21.2 Troubleshooting............................................................................................................... 69
21.3 Recommended Sub-stream for 3G Network Transmission................................................ 72

Mobile Enforcement System User Manual
8
Chapter 1 Introduction
1.1 Overview
DS-MI9605-GA series mobile enforcement system, hereinafter referred to as system or device, as a
self-developed product adopts multiple key technology, including local video storage, 3G dialing,
wireless network transmission, satellite positioning, remote control, and light supplement, make it
perfectly meet the demand of all-day enforcement.
Owing to these functions, the DS-MI9605-GA series mobile enforcement system is widely applied
to the police vans, special vehicles, emergency scenes, etc., providing a complete solution for the
traffic law enforcement, security protection, emergency commanding and other surveillance
projects.
1.2 Main Features
1-ch 1080p positioning system lite and 4-ch network camera.
H.265 video compression for main stream and sub-stream.
1-ch VGA video output with resolution of 1280 × 800.
Pluggable dummy HDD supporting two 2.5-inch HDDs/SSDs.
Dummy HDD adopts HDD/SSD vibration damping technology.
IR and white light illumination help to capture high quality images in dim light environment.
Load name overlay feature records the geographical information of video evidence.
Operate menu and control positioning system lite via single and multi-touch features.
Wireless cluster intercom function.
Power-off protection prevents key data from loss.
Dummy HDD provides smart temperature-control module and USB data export interface.
Built-in GPS (Global Positioning System) module precisely positioning the vehicle via the
satellite and recording the location information in the video stream.
Device adopts the aviation plug design to ensure signal stability.
Wide-range power input.
Aluminum die-cast chassis with no-fan design well adaptable to working environment.

Mobile Enforcement System User Manual
9
Chapter 2 Assembly Parts Introduction
2.1 Package List
Unpack and check the package contents carefully. The following assembly parts are supplied:
Table 2-1 Assembly Parts of Enforcement System
Name Quantity Description
Mobile
Enforcement
System
1
Central processing unit, with a built-in GPS module and wireless
network transmission module. Encoding data for storage or
transmission.
Network HD IR
Positioning
System Lite
1 Record and capture the traffic violation scene.
Manual
Controller 1 Control mobile enforcement system.
LCD Monitor 1 Display local image, including live view, playback, and menu
operation.

Mobile Enforcement System User Manual
10
2.2 Panel Description
2.2.1 Front Panel
Figure 2-1 Front Panel
Table 2-2 Description of Front Panel
No. Name Description
1 Dummy HDD Third-generation dummy HDD with vibration-damping technology
2 LAN 1 × 10M/100M/1000M RJ45 network interface
3 USB 2 × Type-A USB 3.0 interface
4
Indicator PWR (Power indicator)
Solid green: Device is powered on
Solid red: Device is standby
RDY (Ready indicator)
Solid green: Device starts up normally
PTZ (PTZ indicator)
Solid green: Positioning system lite is connected
REC (Recording indicator)
Solid green: Device is recording normally.
IPC 1 to 4 (IPC indicator):
Solid green: IP camera is connected.

Mobile Enforcement System User Manual
11
2.2.2 Rear Panel
Figure 2-2 Front Panel of Enforcement Host
Table 2-3 Description of Rear Panel
Unlit: No camera is connected.
5 HDMI HDMI interface
6 eSATA eSATA interface (reserved)
7 SD SD card slot
8 Panel lock Lock/unlock dummy HDD and SD card slot
No. Name Description
1 Display LCD Interface
2 Controller Manual controller interface
3 CH1 Positioning system lite interface
4 AV OUT Analog video output
5 POWER Power supply of 6-pin aviation plug
6 Wi-Fi Wi-Fi antenna interface
7 GPS GPS antenna interface

Mobile Enforcement System User Manual
12
2.3 Manual Controller Introduction
The image of standard manual controller is shown below:
Figure 2-3 Manual Controller View
8 IPC 1 to 4 Audio and video input of channel 1 to 4
9 LINE Two-way audio interface
10 USB USB 3.0 of 5-pin aviation plug
11 RS-232 RS-232 interface
12 ANT antenna 3G dialing antenna interface
13 I/O
I/O Interface, including:
Alarm input, triggered by high/low level
vehicle information input
Relay signal alarm output

Mobile Enforcement System User Manual
13
Table 2-4 Buttons Description
No Name Description
1 Switch Lock Power on/off.
2
Start/stop manual recording.
Light is red when recording.
Enter/exit playback.
Light is green when in playback interface.
3
Adjust Shutter speed of Positioning System Lite.
Unlit: Shutter speed is 1/100s.
Solid green: Shutter speed is 1/300s.
Flashing in slow frequency: Shutter speed is 1/600s.
Flashing in high frequency: Shutter speed is 1/1000s.
Enable/disable supplement light.
Light is orange when enabled, light off when
disabled.
In live view mode, switch to Positioning System Lite. In
playback search result interface, select a single file.
Switch the function of and .
Focus on near view when the indicator of is
on.
Increase brightness when the indicator of is
off.
Focus on far view when the indicator of is on.
Decrease brightness when the indicator of is
off.
4 ~
Numeric buttons (0~9).
Character buttons (a to z, A to Z).
Menu selection function.
Presets setting and calling function.
5
Save settings and exit from current menu.
Light is on when in menu interface.

Mobile Enforcement System User Manual
14
No Name Description
6
In playback search result interface, press it to select all
files.
7 OK
Works as the OK button:
Manual capture.
Start/stop traffic violation recording.
8 Joystick
Steer Positioning System Lite to desired view.
Zoom in/out for Positioning System Lite.
Menu operation and edit parameters.

Mobile Enforcement System User Manual
15
Chapter 3 Installation
3.1 Install HDD
Before You Start:
Prepare the tools and components for installation:
One factory recommended 2.5-inch HDD.
Antistatic gloves
Key to dummy HDD (delivered with device)
Cross screwdriver
Screws (delivered with device)
Figure 3-1 Tools
Purpose:
Perform the following steps to install the HDD on the device.
Step 1 Insert the key and unlock dummy HDD.
Step 2 Unfasten the two screws of dummy HDD and pull dummy HDD out of device.
Step 3 Use cross screwdriver to loosen the two screws and remove them, and then take the dummy
HDD apart.

Mobile Enforcement System User Manual
16
Figure 3-2 Take Apart Dummy HDD
Step 4 Place HDD into the dummy HDD, with the PCB facing down.
Figure 3-3 Place HDD
Step 5 Push the HDD along the direction shown in Figure 3-4 to connect HDD with socket of dummy
HDD.
Figure 3-4 Push HDD

Mobile Enforcement System User Manual
17
Step 6 Use four sunk screws to fix HDD with dummy HDD.
Figure 3-5 Fix HDD
Step 7 Reassemble the dummy HDD.
Figure 3-6 Reassemble Dummy HDD
Step 8 Plug the dummy HDD back to the device and then tighten the screws clockwise.
Step 9 Turn the key clockwise to lock dummy HDD.
3.2 Install SIM Card
Purpose:
Pluggable 3G wireless communication module is designed for the device and you should install
the SIM card to realize the wireless communication function.
Before You Start
Prepare the tools and components for installation:
SIM card

Mobile Enforcement System User Manual
18
Wrench
Figure 3-7 Tools
Step 2 Use wrench to unfasten and remove the two screws fixing the 3G .
Step 3 Pull out the 3G and Wi -Fi module .
Step 4 Press the yellow button on the 3G slot and then pull the SIM card tray out.
Figure 3-8 Pull out SIM Card Tray
Step 5 Place the SIM card on SIM card tray.
Figure 3-9 Place SIM card on SIM Card Tray
Step 6 Insert the SIM card tray back to SIM card slot.