HIK VISION DS-PEA1-21 User manual

Estación de alarma de pánico
Manual de usuario

Panic Alarm StationUser Manual
i
User Manual
COPYRIGHT © 2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties
of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to panic alarm station.
The Manual includes instructions for using and managing the product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.

Panic Alarm StationUser Manual
ii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.EU Conformity
Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, the
RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specific battery information. The battery is marked
with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Panic Alarm StationUser Manual
iii
Applicable Models
This manual is applicable to the models listed in the following table.
Product
Model
Panic Alarm Station
DS-PEA1-21
Box Panic Alarm Station
DS-PEA2-21
Pole Panic Alarm Station
DS-PEA3M-21
DS-PEA3M-21H
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Safety Instruction
The device should be used in compliance with local laws and electrical safety regulations. Refer to the
appropriate documentation for detailed information.
The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and the
Limited Power Source (100～120/200～240 VAC). Refer to the appropriate documentation for
detailed information.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused
by overload.
Make sure the plug is properly connected to the power socket.
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power
cable, and contact the service center.
Do not drop the device or subject it to physical shock.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
Do not aim the lens at the sun or any other bright light.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

Panic Alarm StationUser Manual
iv
When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam,
or it may burn out.
Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty, or damp
environments, the appropriate temperature is -40℃to 60℃.
Place the device in a dry and well-ventilated environment.
Keep non-waterproof devices away from liquids.
Keep the device in original or similar packaging while transporting it.
A few device components (e.g., electrolytic capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Improper use or replacement of the battery may result in explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries in conformance with the instructions provided by the
battery manufacturer.
Never attempt to disassemble the device.

Panic Alarm StationUser Manual
v
Table of Content
Chapter 1 Overview.................................................................................................................................................................................6
Description.............................................................................................................................................................................61.1
Key Features ..........................................................................................................................................................................61.2
Chapter 2 Structure Description..............................................................................................................................................................7
Mainboard Description ..........................................................................................................................................................72.1
Appearance Description ........................................................................................................................................................82.2
Panic Alarm Station.......................................................................................................................................................82.2.1
Box Panic Alarm Station................................................................................................................................................92.2.2
Pole Panic Alarm Station.............................................................................................................................................102.2.3
Installation and Connections ...............................................................................................................................................102.3
Power Supply Wiring...................................................................................................................................................112.3.1
Network Wiring...........................................................................................................................................................112.3.2
Audible and Visual Alarm Wiring ................................................................................................................................122.3.3
Alarm Input Wiring (Normally Open)..........................................................................................................................122.3.4
Pole Panic Alarm Station Installation ..........................................................................................................................132.3.5
Chapter 3 Activating the Control Panel .................................................................................................................................................17
Chapter 4 Device Remote Operation.....................................................................................................................................................18
Device Management............................................................................................................................................................184.1
Add a Device ...............................................................................................................................................................184.1.1
Edit a Device ...............................................................................................................................................................194.1.2
Delete a Device ...........................................................................................................................................................194.1.3
Status ..........................................................................................................................................................................204.1.4
Remote Configurations ........................................................................................................................................................204.2
System Information Settings.......................................................................................................................................204.2.1
Network Settings ........................................................................................................................................................264.2.2
Storage........................................................................................................................................................................314.2.3
Alarm Settings.............................................................................................................................................................334.2.4
Image Settings ............................................................................................................................................................374.2.5
Event Settings .............................................................................................................................................................394.2.6
Operation....................................................................................................................................................................404.2.7
Status ..........................................................................................................................................................................404.2.8
Zone Settings .......................................................................................................................................................................414.3
Zone Settings ..............................................................................................................................................................414.3.1
Zone Event Settings ....................................................................................................................................................424.3.2
Alarm Pop-up Window Settings ..................................................................................................................................434.3.3
Broadcast Settings ...............................................................................................................................................................444.4

Panic Alarm StationUser Manual
6
Chapter 1 Overview
Description1.1
DS-PEA series of active panic alarm station supports multiple networks. It provides live view,
two-way audio, and customized audio input. It supports linkage with the surrounding cameras and
external lamp, sound box, etc. It helps to realize alarm aid in emergency.
Key Features1.2
Network adaptive and video and audio adaptive
Audio and video file storage
H.264/H.265, G.711U, G726
Video collection and all-day monitoring with 2MP HD IR camera
Built-in omnidirectional microphone to realize two-way audio
Multiple network protocols including TCP/IP, SNMP, RTSP and SADP
Supports Hik-SIP, Ehome, and Ezviz
Waterproof, anti-electromagnetic interference, tamper-proof, explosion-proof, and
anti-lightning (Panic Alarm Station doesn’t support waterproof)

Panic Alarm StationUser Manual
7
Chapter 2 Structure Description
Mainboard Description2.1
Mainboard of panic alarm stationFigure 2-1

Panic Alarm StationUser Manual
8
Appearance Description2.2
Panic Alarm Station2.2.1
1
2
3
4
5
6
One-touch Panic Alarm Station
Figure 2-2
Panel Description
Table 2-1
No.
Description
1
Loudspeaker
2
IR Light
3
Camera
4
Light Sensor
5
Panic Alarm Button
6
Microphone

Panic Alarm StationUser Manual
9
Box Panic Alarm Station2.2.2
1
2
3
4
5
6
7
Case Panic Alarm Station
Figure 2-3
Panel Description
Table 2-2
No.
Description
1
Audible Alarm Lamp
2
Loudspeaker
3
IR Light
4
Camera
5
Light Sensor
6
Panic Alarm Button
7
Microphone

Panic Alarm StationUser Manual
10
Pole Panic Alarm Station2.2.3
1
2
3
4
5
6
7
Pole Panic Alarm Station
Figure 2-4
Panel Description
Table 2-3
No.
Description
1
Audible Alarm Lamp
2
Microphone
3
IR Light
4
Camera
5
Light Sensor
6
Loudspeaker
7
Panic Alarm Button
Installation and Connections2.3
The product is suitable for mounting on concrete or other non-combustible surface only.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and
should be easily accessible.
For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device (2.5A)
shall be incorporated external to the equipment.

Panic Alarm StationUser Manual
11
Power Supply Wiring2.3.1
Power Supply WiringFigure 2-5
Network Wiring2.3.2
Switch
Power Interface
Mainboard
Port
1
Port
2
Network WiringFigure 2-6

Panic Alarm StationUser Manual
12
Audible and Visual Alarm Wiring2.3.3
Audible and Visual Alarm WiringFigure 2-7
Alarm Input Wiring (Normally Open)2.3.4
Alarm Input Wiring (Normally Open)Figure 2-8

Panic Alarm StationUser Manual
13
Pole Panic Alarm Station Installation2.3.5
Pole Panic Alarm Station (without Speed Dome Bracket)Dimension
2205.2 mm
Front View Side View Top View
260 mm
450 mm
Lock
Pole Panic Alarm Station (without Speed Dome Bracket)DimensionFigure 2-9

Panic Alarm StationUser Manual
14
Pole Panic Alarm Station (with Speed Dome Bracket)Dimension
260 mm
450 mm
4504.7 mm
Front View Side View Top View
Lock
Pole Panic Alarm Station (with Speed Dome Bracket)DimensionFigure 2-10

Panic Alarm StationUser Manual
15
Pole Panic Alarm Station Grounding Cage Dimension(without Speed Dome Bracket)
800 mm
1030 mm
80 mm
4 –M20
C25 Concrete
Conduit Diameter
≥30mm
Reinforced Rebar
Foundation Bolt
Rubble
370mm 20mm
Basement
Weld ⌀8Rebar with
Foundation Bolt
800 mm
100 300 mm
Basement
420mm
80 mm
700 mm 150 mm
150 mm
Route the conduit through the
square area
Conduit Diameter ≥30mm
Basement
Dimension
160 mm
450 mm
370 mm
500 mm
420 mm
104 160 mm
Pole Panic Alarm Station Grounding Cage Dimension(without Speed Dome Bracket)Figure 2-12

Panic Alarm StationUser Manual
16
Pole Panic Alarm Station Grounding Cage Dimension(with Speed Dome Bracket)
4-M20
1380 mm
1200 mm
80 mm
150 mm
370 mm M20
450 mm
370 mm
160 mm
500 mm
420 mm
160 mm
104
1200 mm
300 mm300 mm
100
150 mm
420 mm
80 mm
700 mm
C25 Concrete
Conduit Diameter
≥30mm
Reinforced Rebar
Foundation Bolt
Rubble
Weld ⌀8Rebar with
Foundation Bolt
Basement Basement
Route the conduit through the
square area
Conduit Diameter ≥30mm
Basement
Dimension
Pole Panic Alarm Station Grounding Cage Dimension(with Speed Dome Bracket)Figure 2-13

Panic Alarm StationUser Manual
17
Chapter 3 Activating the Control Panel
Purpose:
You are required to activate the control panel first before you can use the control panel.
Activation via SADP, and Activation via client software are supported.
Activation via SADP Software
SADP software is used for detecting the online device, activating the device, and resetting the password.
Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts. Follow the steps
to activate the control panel.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an inactive device.
3. Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
4. Click OK to save the password.
You can check whether the activation is completed on the popup window. If activation failed, please make sure that the
password meets the requirement and then try again.
5. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking
the checkbox of Enable DHCP.

Panic Alarm StationUser Manual
18
6. Input the password and click the Modify button to activate your IP address modification.
Activation via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software according to the prompts. Follow the
steps to activate the control panel.
Steps:
1. Run the client software and the control panel of the software pops up, as shown in the figure below.

Panic Alarm StationUser Manual
19
2. Click the Device Management icon to enter the Device Management interface, as shown in the figure below.
3. Click Add Device Type to enter the adding device type page.
4. Select Security Control Panel.
5. Click Security Control Panel in the Organization list.
6. Check the device status from the device list, and select an inactive device.
7. Click the Activate button to pop up the Activation interface.
8. Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
9. Click OK button to start activation.
10. Click the Modify Netinfo button to pop up the Network Parameter Modification interface, as shown in the figure below.