HIK VISION 607 Series User manual

607 Series Face Recognition Terminal
User Manual

607 Series Face Recognition Terminal User Manual
i
User Manual
© 2019 Hangzhou Hikvision Digital Technology Co., Ltd.
This manual is applied for face recognition terminal.
Product Name
Model
Face Recognition Terminal
DS-K1T607M
DS-K1T607MF
DS-K1T607E
DS-K1T607EF
DS-K1T607MW
DS-K1T607MFW
DS-K1T607PE
DS-K1T607PEF
DS-K1T607PMW
DS-K1T607PMFW
DS-K1T607TM
DS-K1T607TMF
DS-K1T607TE
DS-K1T607TEF
DS-K1T607TMW
DS-K1T607TMFW
It includes instructions on how to use the Product. The software embodied in the Product is
governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision
Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This manual cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are registered
trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other
trademarks mentioned in this manual are the properties of their respective owners. No right of
license is given to use such trademarks without express permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY

607 Series Face Recognition Terminal User Manual
ii
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Support
Should you have any questions, please do not hesitate to contact your local dealer.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognition features, biometrics data is stored in your device with encryption
method; for fingerprint device, only fingerprint template will be saved, which is impossible to
reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative and
physical security controls, conduct periodic reviews and assessments of the effectiveness of your
security controls.

607 Series Face Recognition Terminal User Manual
iii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European standards
listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information see:
www.recyclethis.info

607 Series Face Recognition Terminal User Manual
iv
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Use only power supplies listed in the user instructions:
Model
Manufacturer
Standard
C2000IC12.0-24P-DE
MOSO Power Supply Technology Co.,Ltd.
CEE
C2000IC12.0-24P-GB
MOSO Power Supply Technology Co.,Ltd.
BS
KPL-040F-VI
Channel Well Technology Co Ltd.
CEE
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
All the electronic operation should be strictly compliance with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
Please use the power adapter, which is provided by normal company. The power consumption
cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause over-heat
or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle
the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.

607 Series Face Recognition Terminal User Manual
v
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device for the detailed
operating temperature), cold, dusty or damp locations, and do not expose it to high
electromagnetic radiation.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or
radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the fingers may erode the surface coating of the device
cover.
Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and lead to additional costs.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the battery manufacturer.
Biometric recognition products are not 100% applicable to anti-spoofing environments. If you
require a higher security level, use multiple authentication modes.
Working temperature: -30 °C ~ 60 °C
Indoor and outdoor use. If installing the device indoors, the device should be at least 2 meters
away from the light, and at least 3 meters away from the window or the door. If installing the
device outdoors, you should apply Sililcone sealant among the cable wiring area to keep the
raindrop from entering.
Protection level: IP65

607 Series Face Recognition Terminal User Manual
vi
Table of Contents
Chapter 1 Overview.................................................................................................................1
1.1 Introduction .........................................................................................................................1
1.2 Main Features ......................................................................................................................1
1.2.1 DS-K1T607 Series Features...............................................................................................1
1.2.2 DS-K1T607P Series Features.............................................................................................2
1.2.3 DS-K1T607T Series Features.............................................................................................2
Chapter 2 Appearance .............................................................................................................4
Chapter 3 Installation ..............................................................................................................6
3.1 Installation Environment......................................................................................................6
3.2 Installing with Gang Box.......................................................................................................6
3.3 Installing without Gang Box .................................................................................................8
Chapter 4 Terminal Connection..............................................................................................12
Chapter 5 Activation..............................................................................................................14
5.1 Activating via Device ..........................................................................................................14
5.2 Activating via SADP Software .............................................................................................14
5.3 Activating via Client Software ............................................................................................16
Chapter 6 Basic Operation .....................................................................................................19
6.1 Application Mode Settings .................................................................................................19
6.2 Login...................................................................................................................................19
6.3 General Parameters Settings..............................................................................................20
6.3.1 Communication Settings ................................................................................................20
6.3.2 System Settings ..............................................................................................................23
6.3.3 Setting Time ...................................................................................................................29
6.4 User Management..............................................................................................................29
6.4.1 Adding User ....................................................................................................................30
6.4.2 Managing User ...............................................................................................................32
6.5 Setting Access Control Parameters ....................................................................................33
6.6 Other Management............................................................................................................34
6.6.1 Managing Data ...............................................................................................................34
6.6.2 Managing Log Query ......................................................................................................35
6.6.3 Importing/Exporting Data ..............................................................................................36
6.6.4 Viewing System Information..........................................................................................37
6.7 Authenticating Identity ......................................................................................................39
6.7.1 Authenticating via 1:1 Matching....................................................................................39

607 Series Face Recognition Terminal User Manual
vii
6.7.2 Authenticating via 1:N Matching ...................................................................................40
6.7.3 Authenticating via 1:1 Matching and 1:N Matching ......................................................40
6.8 Two-way Audio...................................................................................................................40
6.8.1 Calling iVMS-4200 Client Software from Device ............................................................41
6.8.2 Calling Master Station from Device................................................................................41
6.8.3 Calling Device from iVMS-4200 Client Software............................................................42
6.8.4 Calling Indoor Station from Device ................................................................................42
Chapter 7 Client Operation ....................................................................................................43
7.1 User Registration and Login ...............................................................................................43
7.2 System Configuration .........................................................................................................44
7.3 Access Control Management .............................................................................................44
7.3.1 Adding Access Control Device ........................................................................................45
7.3.2 Viewing Device Status....................................................................................................59
7.3.3 Editing Basic Information ...............................................................................................60
7.3.4 Network Settings............................................................................................................61
7.3.5 Capture Settings.............................................................................................................63
7.3.6 RS-485 Settings...............................................................................................................64
7.3.7 Wiegand Settings ...........................................................................................................65
7.3.8 Setting Multiple NICs......................................................................................................66
7.3.9 Setting Face Recognition Terminal .................................................................................66
7.3.10 Remote Configuration ................................................................................................67
7.4 Organization Management ................................................................................................79
7.4.1 Adding Organization.......................................................................................................79
7.4.2 Modifying and Deleting Organization ............................................................................80
7.5 Person Management..........................................................................................................80
7.5.1 Adding Person ................................................................................................................80
7.5.2 Managing Person............................................................................................................91
7.5.3 Issuing Card in Batch ......................................................................................................92
7.6 Schedule and Template ......................................................................................................93
7.6.1 Week Schedule...............................................................................................................94
7.6.2 Holiday Group ................................................................................................................95
7.6.3 Template.........................................................................................................................96
7.7 Permission Configuration...................................................................................................98
7.7.1 Adding Permission..........................................................................................................99
7.7.2 Applying Permission.....................................................................................................100
7.8 Advanced Functions .........................................................................................................101

607 Series Face Recognition Terminal User Manual
viii
7.8.1 Access Control Parameters...........................................................................................101
7.8.2 Card Reader Authentication.........................................................................................105
7.8.3 Multiple Authentication...............................................................................................106
7.8.4 Open Door with First Card ...........................................................................................109
7.8.5 Anti-Passing Back .........................................................................................................110
7.9 Searching Access Control Event .......................................................................................111
7.9.1 Searching Local Access Control Event ..........................................................................112
7.9.2 Searching Remote Access Control Event......................................................................112
7.10 Access Control Event Configuration .................................................................................113
7.10.1 Access Control Event Linkage ...................................................................................113
7.10.2 Event Card Linkage ...................................................................................................114
7.11 Door Status Management ................................................................................................116
7.11.1 Access Control Group Management ........................................................................117
7.11.2 Anti-control the Access Control Point (Door)...........................................................118
7.11.3 Status Duration Configuration .................................................................................119
7.11.4 Real-time Card Swiping Record ................................................................................121
7.11.5 Real-time Access Control Alarm...............................................................................121
7.12 Live View ..........................................................................................................................123
7.12.1 Starting and Stopping Live View ..............................................................................123
7.12.2 Manual Recording and Capture ...............................................................................123
7.12.3 Other Functions in Live View ...................................................................................125
7.12.4 Controlling Door During Live View...........................................................................126
7.13 Arming Control.................................................................................................................127
7.14 Time and Attendance.......................................................................................................127
7.14.1 Shift Schedule Management ....................................................................................128
7.14.2 Attendance Handling................................................................................................134
7.14.3 Advanced Settings ....................................................................................................138
7.14.4 Attendance Statistics................................................................................................142
Appendix A Tips for Scanning Fingerprint ............................................................................... 146
Appendix B Tips When Collecting/Comparing Face Picture ..................................................... 147
B.1 Positions (Recommended Distance:0.5 m) ........................................................................ 147
B.2 Expression........................................................................................................................ 147
B.3 Posture............................................................................................................................. 148
B.4 Size .................................................................................................................................. 148
Appendix C Tips for Installation Environment ......................................................................... 149
Appendix D Relationship Between Wake-up Distance and Environment.................................. 150

607 Series Face Recognition Terminal User Manual
ix
Appendix E Dimension ........................................................................................................... 151

607 Series Face Recognition Terminal User Manual
1
Chapter 1 Overview
1.1 Introduction
DS-K1T607 series face recognition terminal is a kind of access control device for face
recognition, which is mainly applied in security access control systems, such as logistic
centers, airports, university campuses, alarm centrals, dwellings and so on.
1.2 Main Features
1.2.1 DS-K1T607 Series Features
7-inch LCD touch screen
2 MP wide-angle dual-lens
Adjusts supplement light brightness manually
Face recognition distance: 0.3 m to 1.5 m
Suggested height for face recognition: between 1.4 m and 1.9 m
Deep learning algorithm
6,000 face capacity, 5,000 fingerprint capacity, and 10,000 event capacity
Multiple authentication modes
Face recognition duration ≤ 0.5 s/User; face recognition accuracy rate ≥99%
Device parameters management, search, and settings
Imports card and user data to the device via TCP/IP communication or USB flash drive
Stand-alone operation
Transmits data to the client software via TCP/IP communication and saves the data on the
client software
Capture linkage and captured pictures saving
Imports data to the device from the client software
Manage, search and set device data after logging in the device locally
Connects to one external card reader or access controller via RS-485 protocol
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the
terminal is destroyed
Two-way audio with client software, door station, indoor station, and master station
Automatic network replenishment (ANR)
Remote live view via RTSP protocol; encoding mode: H.264

607 Series Face Recognition Terminal User Manual
2
NTP, manually time synchronization, and auto synchronization
Audio prompt
Watchdog design and tamper function
1.2.2 DS-K1T607P Series Features
7-inch LCD touch screen
2 MP wide-angle dual-lens
Adjusts supplement light brightness manually
Face recognition in dark environment
Face recognition distance: 0.3 to 1.5 m
Suggested height for face recognition: between 1.4 m and 1.9 m
Deep learning algorithm
10,000 face capacity, 5,000 fingerprint capacity, and 50,000 event capacity
Multiple authentication modes
Face recognition duration ≤ 0.5 s/User; face recognition accuracy rate ≥99%
Device parameters management, search, and settings
Stand-alone operation
Transmits data to the client software via TCP/IP communication and saves the data on the
client software
Capture linkage and captured pictures saving
Imports data to the device from the client software
Manage, search and set device data after logging in the device locally
Connects to one external card reader or access controller via RS-485 protocol
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the
terminal is destroyed
terminal is destroyed
Two-way audio with client software, door station, indoor station, and master station
Automatic network replenishment (ANR)
Remote live view via RTSP protocol; encoding mode: H.264
NTP, manually time synchronization, and auto synchronization
Audio prompt
Watchdog design and tamper function

607 Series Face Recognition Terminal User Manual
3
1.2.3 DS-K1T607T Series Features
7-inch LCD touch screen
2 MP wide-angle dual-lens
Adjusts supplement light brightness manually
Face recognition in dark environment
Face recognition distance: 0.3 to 1.5 m
Suggested height for face recognition: between 1.4 m and 1.9 m
Deep learning algorithm
50,000 face capacity, 5,000 fingerprint capacity, and 50,000 event capacity
Multiple authentication modes
Face recognition duration ≤ 0.5 s/User; face recognition accuracy rate ≥99%
Device parameters management, search, and settings
Imports card and user data to the device via TCP/IP communication or USB flash drive
Stand-alone operation
Transmits data to the client software via TCP/IP communication and saves the data on the
client software
Capture linkage and captured pictures saving
Imports data to the device from the client software
Manage, search and set device data after logging in the device locally
Connects to one external card reader or access controller via RS-485 protocol
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the
terminal is destroyed
Two-way audio with client software, door station, indoor station, and master station
Automatic network replenishment (ANR)
Remote live view via RTSP protocol; encoding mode: H.264
NTP, manually time synchronization, and auto synchronization
Audio prompt
Watchdog design and tamper function

607 Series Face Recognition Terminal User Manual
4
Chapter 2 Appearance
Refer to the following contents for detailed information of the DS-K1T607 series face recognition
terminal:
Table 2-1 Description of DS-K1T607 Series Face Recognition Terminal
No.
Name
Description
1
Fingerprint
Module
Scan fingerprint.
Note: Some models do not support fingerprint
recognition function.
2
Card Swiping Area
Swipe card within this area.
3
Display Screen
7-inch LCD touch screen.
4
Camera (IR Light)
IR light camera for recording or capturing videos or
pictures in IR light.
5
Camera
(White Light)
White light camera for recording or capturing white light
videos or pictures.
6
Supplement Light
(White Light)
Supplement light for white light camera.

607 Series Face Recognition Terminal User Manual
5
7
Supplement Light
(IR Light)
Supplement light for IR camera.
8
Supplement Light
(IR Light)
Supplement light for IR camera.
9
USB Interface
Connect to USB flash drive.
10
Network Interface
Connect to Ethernet.
11
Power Interface
Connect to power supply.
12
Wiring Terminals
Connect to other external devices, including RS-485 card
reader, Wiegand card reader, door lock, alarm input,
alarm output, etc.

607 Series Face Recognition Terminal User Manual
6
Chapter 3 Installation
3.1 Installation Environment
If installing the device indoors, the device should be at least 2 meters away from the light, and
at least 3 meters away from the window or the door.
If installing the device outdoors, you should apply Sililcone sealant among the cable wiring
area to keep the raindrop from entering.
Make sure the environment illumination is more than 100 Lux.
Notes:
For details about installation environment, see Appendix C Tips for Installation Environment.
Make sure the output of external power supply fulfils LPS.
3.2 Installing with Gang Box
Steps:
1. According to the datum line on the mounting template, stick the mounting template on the wall
or other surface, 1.4 meters higher than the ground.
2. Drill holes on the wall or other surface according to the mounting template and install the gang
box.
3. Use two supplied screws (4_KA4 × 22-SUS) to secure the mounting plate on the gang box.

607 Series Face Recognition Terminal User Manual
7
4. Use another four supplied screws to secure the mounting plate on the wall.
5. Route the cable through the cable hole of the mounting plate, and connect to corresponding
external devices’ cables.
Note: Apply Sililcone sealant among the cable wiring area to keep the raindrop from entering.
6. (Optional) Insert the fingerrint module to the holes at the bottom of the main part.
7. Align the device with the mounting plate and hang the device on the mounting plate.

607 Series Face Recognition Terminal User Manual
8
Make sure the two sheets on the each side of the mount pate have been in the holes at the back
of the device.
8. Use two suppled screws (SC-M4 × 12TP10-SUS) to secure the device and the mounting plate.
Notes:
The installation height here is the recommended height. You can change it according to your
actual needs.
For easy installation, drill holes on mounting surface according to the supplied mounting
template.
3.3 Installing without Gang Box
Steps:
1. According to the datum line on the mounting template, stick the mounting template on the
wall or other surface, 1.4 meters higher than the ground.

607 Series Face Recognition Terminal User Manual
9
2. Drill 6 holes on the wall or other surface according to Hole 1and Hole 2 in the mounting
template.
3. Insert the screw sockets of the setscrews in the drilled holes.
4. Align the 6 holes to the holes on the mounting plate and secure them with 6 screws.

607 Series Face Recognition Terminal User Manual
10
5. Route the cable through the cable hole of the mounting plate, and connect to corresponding
external devices’ cables.
Note: Apply Sililcone sealant among the cable wiring area to keep the raindrop from entering.
6. Align the device with the mounting plate and hang the device on the mounting plate.
Make sure the two sheets on the each side of the mount pate have been in the holes at the
back of the device.
7. Use two suppled screws (SC-M4 × 12TP10-SUS) to secure the device and the mounting plate.