Honeywell FIRE-LITE ALARMS BG-12LR User manual

DF-52353:a • 08/4/10 — Page 1 of 2
BG-12LR and BG-12LRA
Dual-Action Agent Release Stations
Releasing Panels
DF-52353:a • F-250
Dual Action BG-12LR
Dual Action BG-12LRA (shown activated)
General
The BG-12LR and BG-12LRA are Agent Release Stations
designed for use with Fire-lite Fire Alarm Control Panels with
releasing capabilities and RP Series Releasing Systems.
Features
• Non-coded, dual-action operation.
• Made with durable polycarbonate.
• Optional surface backbox.
BG-12LRA INCLUDES:
• Abort switch.
• Power-on indication.
• Released indication.
• Manual release (dual-action).
BG-12LR INCLUDES:
• Dual-action release only.
Applications
The BG-12LRA and BG-12LR are ideal for areas such as
clean rooms and computer rooms where a chemical agent is
used to extinguish a fire.
Product Line Information
BG-12LRA: Agent release station with abort switch, Release
LED, Normal LED.
BG-12LR: Dual-action agent release station.
SBA-10: Surface backbox for BG-12LRA, metal. Dimensions
4.5” (11.43 cm) W x 8.188” (20.8 cm) L x 1.375” (3.49 cm) D.
SB-10: Surface backbox for BG-12LR, metal. Dimensions
4.125” (10.48 cm) W x 5.5” (13.97 cm) L x 1.375” (3.49 cm) D.
SB-I/O: Surface backbox for BG-12LR, plastic.
BG12TR: Optional trim ring for semi-flush mounting.
Agency Listings and Approvals
In some cases, certain modules may not be listed by certain
approval agencies, or listing may be in progress. Consult fac-
tory for latest listing status.
UL/ULC Listed: S711
MEA Listed: 67-20-E
FM Approved
CSFM: 7150-0075:184

Page 2 of 2 — DF-52353:a • 08/4/10
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Fire•Lite Alarms. Phone: [phone], FAX: [phone].
www.firelite.com
Fire•Lite® Alarms is a registered trademark of Honeywell International Inc.
Bayblend® is a registered trademark of Bayer Corp.
©2010 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
Made in the U.S. A.
Wiring
BG-12LRA (Rear view) Agent Release Pull Station
Mount End-of-Line Resistor on the last unit.
Mount 4.7K ELR on the last unit when abort switch and manual release switch are connected to control panel circuits. Mount 47K resis-
tor on last unit when abort switch and manual release switch are connected to monitor module or control module. Refer to control panel
manual for the listed ELR. Refer to the product installation documentation for connection to the control panel