HRS GT36A User manual

INSTRUCTION MANUAL FOR GT36A CONNECTOR
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
1
4
DIS-T-00004327
HK.WATANABE
MO.OKADA
20190311
名称TITLE
INSTRUCTION MANUAL FOR GT36A CONNECTOR
APPROVED
KI.HIROKAWA
20171128
CHECKED
KI.HIROKAWA
20171128
DESIGNED
KJ.OBINATA
20171128
WRITTEN
KJ.OBINATA
20171128
TECHNICAL SPECIFICATION
ETAD-T0401-01
1
1/ 7
FORM HC0011-9-1
HIROSE ELECTRIC CO.,LTD.
△
△
Oct.1.2022Copyright2022HIROSEELECTRICCO.,LTD.AllRightsReserved.

HIROSE ELECTRIC CO.,LTD.
ETAD-T0401-01
1
2/ 7
FORM HC0011-9-2
△
1
1
1. Names of Parts
GT36 Female terminal
GT36A Female housing
GT36A Cover
2. Construction of Parts
GT36 Female terminal
Hirose part name
Hirose part number
Remarks
GT36-2022SCF
CL786-0002-0-00
For 2.5D
GT36A-2022SCF
CL786-0028-3-00
For 2.5D
GT36-2428SCF
CL786-0001-7-00
For 1.5D
GT36-1.6-2.9SCF
CL786-0003-2-00
For 1.5D
GT36-3.3-3.8SCF
CL786-0005-8-00
For 2.5D
GT36G-1.6-2.9SCF
CL786-0025-5-00
For 1.5D foaming (ETC)
GT16G-1.5DHQS(L)
CL766-0111-0-00
For 1.5D foaming (ETC)
GT36A Female housing
Hirose part name
Hirose part number
Remarks
GT36A-4S-HU(A)
CL786-0030-5-00
1.5D: three, ETC/2.5D: one
GT36A-4S-HU(B)
CL786-0031-8-00
1.5D: three, ETC/2.5D: one
GT36A-4S-HU(C)
CL786-0032-0-00
1.5D: three, ETC/2.5D: one
GT36A2-4S-HU(D)
CL786-0024-2-00
1.5D: two, ETC/2.5D: two
GT36A-4S-HU(D)
CL786-0043-0-00
1.5D: three, ETC/2.5D: one
GT36A3-4S-HU(B)
CL786-0117-0-00
1.5D: three, ETC/2.5D: one
GT36A Cover
Hirose part name
Hirose part number
Remarks
GT36A-4S-CV
CL786-0023-0-00
1.5D: three, ETC/2.5D: one
GT36A2-4S-CV
CL786-0034-6-00
1.5D: two, ETC/2.5D: two
GT36A3-4S-CV
CL786-0118-0-00
1.5D: three, ETC/2.5D: one
Oct.1.2022Copyright2022HIROSEELECTRICCO.,LTD.AllRightsReserved.

HIROSE ELECTRIC CO.,LTD.
ETAD-T0401-01
1
3/ 7
FORM HC0011-9-2
△
3. Harness Work
(1) Cutting cable
Cut the cable according to the specified harness length.
See below for the dimension L after wiring and the cable cutting length.
Cable cutting length：Ｌ１－ ９．６
Ｌ２＋１７．５
(2)Crimping terminals
Refer to the terminal instruction manual for the terminal crimping procedures and crimping
quality standards. (ETAD-T0392-01、ETAD-T0400-01)
Oct.1.2022Copyright2022HIROSEELECTRICCO.,LTD.AllRightsReserved.

HIROSE ELECTRIC CO.,LTD.
ETAD-T0401-01
1
4/ 7
FORM HC0011-9-2
△
1
(3) Inserting crimped terminals into housings
①Insert a crimped GT36 female terminal along the terminal insertion hole into the housing to the
end. After insertion, check if the terminal engagement is inserted into the housing engagement.
* Coaxial cables and available cavities
GT36A-4S-HU(*)×GT36A-4S-CV
Cavities
Coaxial cables
A
1.5D
B
1.5D
C
1.5D foaming (ETC)/2.5D
D
1.5D
GT36A2-4S-HU(*)×GT36A2-4S-CV
Cavities
Coaxial cables
A
1.5D foaming (ETC)/2.5D
B
1.5D
C
1.5D foaming (ETC)/2.5D
D
1.5D
Viewed from engagement side
GT36A3-4S-HU(*)×GT36A3-4S-CV
Cavities
Coaxial cables
A
1.5D
B
1.5D
C
1.5D
D
1.5D foaming (ETC)/2.5D
1 Table Deleted
Terminal engagement
Terminal
insertion hole
Housing engagement
Oct.1.2022Copyright2022HIROSEELECTRICCO.,LTD.AllRightsReserved.

HIROSE ELECTRIC CO.,LTD.
ETAD-T0401-01
1
5/ 7
FORM HC0011-9-2
△
②Insert the GT36A cover into the GT36A housing until it is engaged with the housing
engagement and a click sound is heard.
③Make sure that it is engaged with the engagement.
Housing engagement
Engagement
Cover
Oct.1.2022Copyright2022HIROSEELECTRICCO.,LTD.AllRightsReserved.

HIROSE ELECTRIC CO.,LTD.
ETAD-T0401-01
1
6/ 7
FORM HC0011-9-2
△
4. Connector Engagement Procedures
①Adjust the direction of the notch of the board-side connector to that of the cable pullout side of
the harness-side connector.
②Insert the connector until it is locked and a click sound is heard.
* After completion of work, pull the connector in the disconnection direction and make sure that it
does not come out.
The above figure shows the unfinished engaged condition.
The above figure shows the engaged condition.
Engagement
direction
Notch
Cable pullout side
Oct.1.2022Copyright2022HIROSEELECTRICCO.,LTD.AllRightsReserved.

HIROSE ELECTRIC CO.,LTD.
ETAD-T0401-01
1
7/ 7
FORM HC0011-9-2
△
5. Connector Disconnection Procedures
①Push the lock button until the connector is unlocked and pull it out.
6. Instructions
①Do not touch terminals unnecessarily.
②Do not put any object on a terminal. Do not drop terminals. Otherwise, terminals may be
deformed or become dirty. Handle terminals carefully.
③Do not pull terminals forcedly when they are entangled. Disentangle them with care not to
deform them.
④Be careful not to deform terminals when touching them.
7．Storage Conditions
Storage place
Temperature & humidity conditions
Storage period
Indoor storage
15～30℃、60%RH or less
Six months (in our packing condition)
Store the products in a place that meets the following conditions, if they cannot be stored in
an air-conditioned warehouse as shown above. Do not store the products in a place with much
humidity or dust, exposure to direct sunlight, etc.
Storage place
Temperature & humidity conditions
Storage period
Indoor storage
-30～60℃、80%RH or less
Six months (in our packing condition)
Lock
button
Disconnection direction
Disconnection direction
Oct.1.2022Copyright2022HIROSEELECTRICCO.,LTD.AllRightsReserved.