Hardware Overview
LED
Power Indicator: Steady green when power on, blinking green when the call is ringing.
Line Keys: Steady green: During the conversation, or plan to dial a call.
Blinking red: The call is ringing.
Off: Idle interface.
Place a call
Three ways to make a call:
Handset: Pick up the handset; enter the number, then press the send soft key or press .
Speaker: Press or the line keys; enter the number, then press the send soft key or press .
Headset: Press ; enter the number, then press the send soft key or press .
End a call
To end a call in three different modes:
Handset: Hang up the handset or press the cancel soft key.
Speaker: Press , or press the cancel soft key.
Headset: Press the cancel soft key.
Answer a call
Handset: Pick up the handset.
Speaker: Press .
Headset: Press .
Redial
Press to redial the last call that dialed.
Hold
Press or press the hold soft key during a call to hold the call.
Press or resume soft key to resume the call.
Call Transfer
Blind Transfer
1) Press or transfer soft key during the conversation,the call is on hold now.
2) Enter the number that transfers to.
3) Press or the transfer soft key and now the blind transfer completed.
Attended Transfer (at least one line key set as Auto)
1) Press or transfer soft key during the conversation,the call is on hold now.
2) Enter the number that transfer to and press the send soft key or .
3) Start the second conversation, press or transfer soft key, then transfer completed.
Semi-Attended Transfer (at least one line key set as Auto)
1) Press or transfer soft key during the conversation,the call is on hold now.
2) Enter the numbertransfer to, andthen press , then you can hear the ring tone.
3) Press or the Tran soft key and now the Semi-attended transfer completed.
Call Conference
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press line 2, the call is placed on hold.
2) A enter the number of C and then press send soft key or C answers the call.
3) A press or the conference soft key, then A, B and C are now in a conference.
4) If add D&E, press Line 3, the current conference is on hold, dial D and press , the four
are in conference. Press line 4, and dial E, press , then A,B,C,D,E are in conference.
CallMute
Press to mute the microphone during the call.
Press again to un-mute the conversation.
Power Indicator
Line keys
Softkeys
Speaker
Mute
Headset
Message
Redial
Transfer
Hold
Conference
Navigation Keys
Speaker
Volume Keys Alphanumeric
Keypad
Note: You can also use Contacts or call log to dial the number you want, press dial
key and place the call by the three ways mentioned. More, you can also alternate the
mode during the call.
Note: 1) If C does not answer the call, A can back to continue the conversation with B;
2) Once A hangs up the call, the conference is ended, while if B or C drops the
call, A&C or A&B conversation continues.
