Bluetooth
UC926U Model connects to a wide range of Bluetooth Headset, compatible withBluetooth
specification V4.0 and backwards compatible with 1.1, 1.2, 2.0 and 3.0.
How to enable headset mode?
1) Find Menu then navigate as follows：Menu->Settings->Basic Setting->Headset:
2) Enable the Headset priority
3) Choose the “Use Headset” or “Speaker&Headset” from “ringer Device for headset” option
4) Press the Save button to save the configuration。
5) Press the headset key on phone’s during the idle status when you accomplish theabove-
mentioned configuration. Headset icon will display on phone status bar
How to activate Bluetooth via phoneinterface？
1) Find Menu then navigate as follows:
MenuSettingsBasic SettingBluetooth
2) Press the Switch button to turn on Bluetooth feature to save the configuration.
3) You will see the Bluetooth icon on phone’s homepage status bar during the idle status.
(Now the icon should have a fork sign, which means the phone is not connected to the Bluetooth
headset.Please refer to the following manual to connect the Bluetoothheadset.)
How to open the Bluetooth pairing mode on Bluetooth headset?
1) Turn on the Bluetooth headset.
2) Long press the multifunction key on the Bluetooth headset until the indicator LEDalternately
flashes red and blue.
The Bluetooth headset is in pairingmode.
How to scan the Bluetooth headset device on phone interface？
1) Press the Scan button on phone interface.
2) The phone will enter the scan interface.
The phone starts searching for Bluetooth headsets within the working range of 32feet.
3) There will display all detected Bluetooth headsets on the phone.
4) Choose the desired Bluetooth Device from the list and connect to it.
5) you will see the "Connect Success!" prompt and the Bluetooth icon without fork sign appear
on the status bar.
How to edit device information on phone interface?
1) Find Menu then navigate as follows:
MenuSettingsBasic SettingBluetooth: Edit DeviceInformation
2) Press the enter button, you can edit the Device Name.
How to adjust the headset volume during acall?
With the Bluetooth headset paired, you can do thefollowing:
Press the Volume key (+) on the Bluetooth headset to increase the volume.
Press the Volume key (-) on the Bluetooth headset to decrease the volume.
How to Ending Calls?
With the Bluetooth headset paired, press the multifunction key on the Bluetoothheadset
to end a call.
Troubleshooting
Why can’t the phone detect the Bluetoothheadset?
1) Ensure the Bluetooth headset is turned on.
2) Ensure the Bluetooth headset isin pairing mode, when the phone is searching for Bluetooth
headsets.
Why there is anoise?
1) Check the battery level. If the battery level is low, charge the Bluetooth headset.
2) Ensure the Bluetooth headset and the phone are within the working range of 10 meters
(32 feet) and there is no obvious interference (walls, doors, etc.) between them.
WiFi
How to enable WiFi feature via phoneinterface:
1) Find Menu then navigate asfollows
Menu->Settings->Basic Setting->WiFi
2) Press the Switch button to turn on WiFi feature.
3) Press the Save button to save the configuration.
How to connect to an available wireless network via phone interface:
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi: AvailableNetwork(s)
2) Press the Enter button, you will see many available wireless networks.
3) You can press the “scan” button to scan the wireless network.
4) You can press the “Detail” button to view a wireless network’s detail information.
5) Choose desired wireless network and then press the “Connect” button.
6) Enter the password if needed.
7) Normally, the phone will successfully connect to WiFi.
How to add a Wireless Network Manually via phone interface?
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi: The StorageNetwork.
2) Press the “Add” button to add a wireless network.
Select a Security Mode.
Enter the desired wireless network(SSID).
Enter the password if needed
3) Press the “Save” button to save the configuration.
You can choose this wireless network to connect it.
How to view Wireless Networkstatus?
If the connection is successful and obtained IP, a wireless network icon
will be displayed in the idle status bar. When the WiFi is connected, but
it's obtaining IP or failed to obtain IP, the icon will have a yellow
exclamation point. If the connection failed, the icon will have a red fork
sign.Note: Contact your network administrator for the WiFi password.
How to Disable WiFifeature?
To disable the WiFi feature via phoneinterface:
1) Find Menu then navigate as follows:
Menu->Settings->Basic Setting->WiFi
2) Press the Switch button to turn off WiFi feature.
3) Press the Save button to save the configuration.
