Husky HOUC3603B1QWK User manual

THANK YOU
USE AND CARE GUIDE
36 IN. -3 DRAWER TOOL CART
We appreciate the trust and confidence you have placed in Husky through the purchase of this chest/cabinet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Husky!
WITH WOOD TOP
Model #HOUC3603B1QWK
THD.com #1000 119 795
Model #HOUC3603BJ1
THD.com #1005 877 478
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
HUSKYTOOLS.COM
1-888-HD-HUSKY
8 a.m. - 7 p.m., EST, Monday-Friday,
9 a.m. - 6 p.m., EST, Saturday

2
Table of Contents
Table of Contents.....................................................................2
Safety Information...................................................................2
Warranty.......................................................................................3
Pre-Assembly............................................................................4
Assembly............................................................................6
Operation...........................................................................8
Maintenance.....................................................................9
Safety Information
6. Do not pull the tool cart, push it when moving.
7. Do not alter this product in any manner.
DANGER: Do not stand on this product. You
may fall or cause the product to tip.
DANGER: Do not move the product prior to
closing and locking all the drawers. The
drawers could come open and make the
product unstable and tip.
DANGER: Do not mount this product on a
truck bed or any other moving object.
WARNING: Keep the product on a level
surface. The product may become unstable and
tip if stored or moved on an uneven surface.
CAUTION: Do not lift this product directly
with a forklift or tow with any mechanical
devices.
CAUTION: Do not exceed the maximum
product weight, including contents. Do not
exceed the maximum weight for each drawer.
See Specifications on page 4.
CAUTION: Only transport this product when
empty. Properly secure when transporting.
1. Do not open more than one drawer at a time.
2. Do not let children approach the tool cart.
4. Lock all drawers before moving the cart.
5. Do not step in the tray.
3. Keep the locking casters brake set unless you are
moving the cart. This will help to prevent the product
from rolling.
Care and Cleaning..........................................................9
Service Parts....................................................................10
Tools Required...........................................................................4
Hardware Included....................................................................4
Specifications............................................................................4
Package Contents......................................................................5
CAUTION: Do not use the side handle as a
point of leverage to lift the unit off of the ground.
Handle is not intended to withstand the force of
vertical lifting, and is only designed to aid in the
movement of unit around on casters. Failure to
adhere to this warning may cause handle to
break and cause personal injury and/or product
damage.

Warranty
The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three (3) years from date of
purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is
found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration
neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in
any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product
as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the products such as surface and/or weathering, as this is
considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential
or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.huskytools.com.
3
HUSKYTOOLS.COM
Pleas e contact 1-888-HD-HUSK Y fo r furthe r assistanc.e

Pre-Assembly
4
TOOLS REQUIRED
Phillips
screwdriver
Safety
goggles
13 mm
Wrench
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
BB
Part Description Quantity
AA Screw M6x15L 32
BB Bolt M8x15L
16
CC
1
10 mm/13 mm wrench
SPECIFICATIONS
Maximum weight capacity (drawers) 150 lbs.
Maximum weight capacity (bottom tray)
250 lbs.
Empty weight 88.9 lbs.
NOTE: Begin product assembly close to the final
intended location of your tool cart . This product is
heavy and may be difficult to move after assembly.
CC
Part Code
L031134F
L031103M815
L3011002

Pre-Assembly (continued)
PACKAGE CONTENTS
5
Part Description Quantity
A Wood top 1
B Side handle 1
C Legs 4
D Swivel caster with brake 2
E Tray 1
F Drawer slide (pair) 3
Part Description Quantity
G Rigid caster 2
H Key (set) 1
I Drawer 3
J Lock 1
K Drawer Liner 3
HUSKYTOOLS.COM
Pleas e contact 1-888-HD-HUSK Y fo r furthe r assistanc.e
B
A
C
D
F
E
G
H
I
J
K

Assembly
1
Installing the legs 2 Attaching the tray
□ Lay the cart upside down. Use the packaging material
to protect the wood top from damage during assembly.
NOTE: The holes in the tool cart are tapped and do not
require nuts.
□
NOTE: Two people may be required to complete
this step.
3
Securing the tray
NOTE: The holes in the tool cart are tapped and do not
require nuts.
□
6
C
AA
Mount the four legs (C) to the cart using six screws (AA)
□
per leg. Do not install four of the screws (AA) in the legs of the
Clip the tray (E) to the four legs (C).
E
C
Ensure all cabinet drawers are securely locked into
place using the lock (J) on the cart.
□
Secure the tray (E) to the legs (C) using two screws (AA)
□
per leg.
□
tool cart on the side adjacent to the Husky badge.
The side handle (B) will be mounted here in a later step.
□
AA
E
C
Installing the casters
□
□
□
□
Mount the two swivel casters with brake (D) to the tray (E)
using four bolts (BB) per caster.
The swivel casters with brake (D) should be installed on
Mount the two rigid casters (G) to the tray (E) using four
bolts (BB) per caster.
Tighten all bolts with a 13 mm wrench.
Carefully return the tool cart to its upright position.
the same side as the Husky badge.
CAUTION: Do not over tighten the bolts.
D
E
CC
BB
G
4

Assembly (continued)
5
7
HUSKYTOOLS.COM
Attaching the side handle
NOTE: The holes in the tool cart are tapped and do not
require nuts.
□
□ Attach the side handle (B) to the tool cart using four screws (AA).
AA
B
Pleas e contact 1-888-HD-HUSK Y fo r furthe r assistanc.e

Operation
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
Slightly insert one side and repeat for the other side.
3
2Removing the drawers
□ Fully extend and empty the drawer.
□ Depending on the slide, either lift or lower the
release lever on both sides so the slides can ride over
the stops. Pull out to remove.
1 Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ Insert the key (H) into the lock and turn it fully to the left to lock.
□ Remove the key (H).
□ Insert the key (H) into the lock and turn it fully to the right to
□ Remove the key (H).
8
H
unlock.
4
Installing the drawer liner
□ Place the drawer liners (K) in appropriately sized
drawers to protect the surface.
K

Maintenance
1
Maintaining the casters 2 Maintaining the drawers
□ Grease the casters annually using high quality
bearing grease.
9
□ Periodically clean the drawer trim, and
inside the drawers with a mild detergent and water.
□ Remove grease and oil with a standard,
nonflammable cleaning fluid.
□ The use of drawer liners is recommended to protect
the finish inside the drawers and make the drawers
easier to clean. Drawer liners can be purchased at
The Home Depot and can be cleaned with soap
□ Lubricate the slides semi-annually with grease or
equivalent.
□
This steel product has been coated with industrial powder coating
Care and Cleaning
□
To help protect the powder coated finish, do not allow harsh
□
®
Use a glass cleaner (Windex or equivalent product) to clean and
chemicals (oil, grease, or other chemical) to remain on the powder
and water.
for a durable finish.
coating surface.
maintain all surfaces of powder coating.
□
The wood top is made of Parawood (also called Rubberwood) which
has UV coating to help protect it from moisture. It can be
®
cleaned with most household cleaners, such as Windex .
Pleas e contact 1-888-HD-HUSK Y fo r furthe r assistanc.e
HUSKYTOOLS.COM

Service Parts
10
B
A
C
D
F
E
G
H
J
K
Part Part Code Description Quantity
A K2532038 Wood top 1
B
DTC04003 (Black)
DTC04008Z (Chrome) Side handle 1
CD290021 (Black)
D29002J (White) Legs 4
D K03220053 Swivel caster with brake 2
ED640021 (Black)
D64002J (White) Tray 1
F DTC35016 Drawer slide (pair) 3
G K03220263 Rigid caster 2
H K06120122 Key (set) 1
J K06120121 Lock 1
K K0129140 Drawer liner 3