hygena Luna TV Unit 464/9883 Datasheet

Assembly lnstructions - Please keep for future reference
Luna TV Unit
Width - 90cm
Depth - 40cm
Height -45.5cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1-15-10-15
464/9883
hygena

1
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all ttings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its nal position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your oor.
Assembly requires 2 people.
Do not stand or put excessive
weight on the product,this could
cause damage.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
This product has been nished using natrual materials. As a living material, you may notice some
variation in the grain and colour shade between the dierent components.
Unlike a synthetic or man-made material which has a uniform nish, a feature of natural wood is its
variation in grain and colour. We wish to reassure you that this is quite normal and is not the result
of any manufacturing fault.
Where sheets of wood are joined together, a line may be detected. Again, this is normal and is not
an imperfection.
The natural nish should be cared for by the periodic application of a good quality 'was' based
domestic furniture polish (Not silicone!!). Occasional / small spills should be removed immediately
using a damp cloth.
Do not allow hot articles to come into contact with the surface, as damage will occur!

Components - Parts lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
2
Top (90x40x2.5cm)
underside
inside
inside
Side frame (right)
(43x37x5cm)
12Side frame (left)
(43x37x5cm)
3
Front stretcher
(74x5x1.5cm)
(74x5x2.5cm)
5Rear stretcher
(74x5x1.5cm)
6
4
(77.8x35.8X0.3cm)
Shelf (74x36.5x1.5cm)
9
Back panel
7
Drawer back (70.6x12x1.2cm)
Drawer front (73.7x16x1.5cm)
8
(71.3x29.7x0.3cm)
10 Drawer base
Apron
(30x12x1.2cm)
12 Drawer side (left)
(28.8x4x1.2cm)
11 Drawer support
(30x12x1.2cm)
13
14
Drawer side (right)

3
0345 6400 800
B C
D
G
E F
A
F
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6 Ruler/tape measure
Components - Fittings
Metal dowel x 17 Large locking nut x 8
Wooden dowel x 14 (6X30mm)
Phillips screwdriver
(Not supplied)
Drawer runners x 2
Screw x 4 (3x12mm)
Bolt x 2 (4x10mm)
Screw x 19 (2.5x10mm)
Handle x 2
H
L
Small locking nut x 9
J
Screw x 8 (4x30mm)
K
Screw x 2 (4x18mm)

4
Assembly Instructions
Preparing panels
Place top , side frames
and , and drawer
.
Screw metal dowels into
all panels as shown.
Note:
Screw metal dowels as
far as shown. Do not
overtighten.
Insert wood dowels into
side frames and and
top as shown.
Assembling drawer runners
Assemble drawer runners
to side frames and
using screws
Note:
The drawer runners
holes shown. It will be necessary
to extend/close the runners to
gain access to the holes.
1
1
1
3
3
2
14
1
3
22
7
7
B
J
B
B
BJ
B
A
A
A
A
BF
BG
22 3
3
F
F
F
F
F
G
G
G
G
14
B
Assemble apron to top
using screws .

5
Assembly Instructions
Assembling shelf and stretchers
Insert large locking nuts
into the underside of shelf
as shown.
Turn locking nuts clockwise
to secure.
a: Locate shelf 9 into position
facing down.
BC
BC
BC
9
9
2
b: Locate front and rear
stretchers and in the
locations shown.
5
5
6
6
9
Insert large locking nuts
into both stretchers as shown.
BC
BC
Turn locking nuts clockwise to
secure.
are facing down.
Front
Back
BC
BC
Note:
Note:
a:
b:

6
Assembly Instructions
Assembling side frame
Locate right side frame into
position.
Assembing top
With help , carefully stand the
unit upright.
Insert wood dowels into
the top of side frames and
.
Insert small locking nuts into
side frames and .
Locate top into position.
Turn locking nuts clockwise to
secure.
Secure using large locking nuts
as shown.
33
BC
BA
BD
2 3
3
1
1
2
2
3
D
C
C
A
C
D
4
5

Assembly Instructions
7
Fitting back panel
Carefully turn the unit over
onto it’s face.
Locate back panel into
position with the cable access
hole at the top as shown.
Secure using screws BE
4
4
E
Top
6

Assembly Instructions
8
7
Assembling drawer
a: Locate drawer sides
and and support
onto drawer front .
Ensure the grooves on
all panels align at the bottom.
Insert small locking nuts
into the drawer sides and
support as shown.
Turn locking nuts clockwise to
secure.
b: Slide drawer base into
the grooves.
c: Assemble drawer back
using screws .
d: Fit handles to drawer
front using screws .
a:
Align grooves
b:
c:
d:
12
12
11 11
13
13
7
7
7
BD
10
10
8
8
7
BJ
BH
BK
D
D
D
D
J
J
H
K
Note:

Assembly Instructions
9
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
8
Locating drawer
With help, turn the whole unit
upright.
Extend the drawer runners fully
out.
Locate the drawer onto the
runners and secure using screws
as shown.
BL
L
L
L