Insignia Diamond Series User manual

www.insigniashowers.com Last Modied: 17/05/2021
INSTALLATION MANUAL
1050|1150
Diamond Series
ATTENTION INSTALLERS:
These instrucons must be
le with the customer
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installaon.
Replacements Parts: Inside of your warranty period visit:
hps://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts: Outside of your warranty period visit
hps://www.insigniashowers.com/replacement-parts.html
WARRANTY REG NO: _______________________
To claim your full 3 year warranty, register your shower within 90 days visit:
hps://www.insigniashowers.com, click support and register for your warranty

www.insigniashowers.com Last Modied: 17/05/2021
02
Contents
Installaon Assistance 3
Thank you for your purchase 4
Tips for assembly 5
Braided Hose QR Code/Link 6
Electrical/Pressure/Tool requirements 7
Box contents 8
Installing the Waste and Levelling the Tray 9
Connecng the Framework 10
Applying RubberGum 11
Installing the Le Back Panel and Side Panel 12
Installing the Front Le Corner Upright 13
Connecng the Framework into the Upright 15
Installing the Column 16
Installing the Front Right Corner Upright 17
Installing the Right Side Panel 19
Installing the Right Back Panel 21
Installing the Door Handles, Seals and Magnets 22
Installing the Roof 23
Installing the Fixed Glass Panel 24
Installing the Seals 25
Installing the Accessories 26
Installing the Door Wheels 27
Water Valve Connecons 28
Control Panel Connecons 29
Steam Generator Connecons 30
Signing o your shower 32
Control Panel Operang Instrucons 33
Spare Parts List 36
Steam Room & Shower Safety Guide 37
Steam Room Usage Guide 38
Bathroom Electrical Zones 39
WEEE Compliance Statement 41

www.insigniashowers.com Last Modied: 17/05/2021
03
Installaon Assistance
Looking for assistance with the Install?
GREAT NEWS!
We have our easy to follow Installaon videos
live online NOW to make your installaon
process easier than ever before!
Simply click the link below and watch the
installaon process.
Shower Install
Please note: this build video is for an Insignia Planum Shower, however 90%
of the process is the same for assembly so it should help you on your way!

www.insigniashowers.com Last Modied: 17/05/2021
04
Thank you for your recent purchase of an Insignia shower. Please read this booklet
with great care to ensure you get the best out of your build and have a shower that
will last for many years to come! Like everything, in order to obtain a rst class
product that will serve you well for many years, the eort and correctness put into the
assembly will reect in the quality of your nish.

www.insigniashowers.com Last Modied: 17/05/2021
05
Before we start, here’s our 4 top ps which may assist you...
TIP 1—Building Your Shower
This product is suitable for a DIY build, providing you are condent in your DIY abilies. Please look through this build guide and decide
on whether you feel condent in undertaking this task. If you are not, seek the services of a professional and show them these
instrucons before hiring.
TIP 2—Hard Water
Due to the nature of this product we highly advise the purchase and ng of a water soener.
(Please note: limescale build up may cause damage to your shower and will not be covered under warranty)
TIP 3—Installaon
These showers are designed to be free standing and movable from their locaon should you have the need to replace anything.
ALWAYS USE Flexible braided water inlet pipes (not supplied) and not central heang plasc type! Get your WRAS Approved Flexible
Braided Hoses here. (www.insigniashowers.com/wras-approved-braided-hoses.html)
NEVER FIX with rigid pipes, NEVER FIX the unit to the wall or oor.
TIP 4—Sealing
When using Insignia’s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the
RubberGum to fail and will not adhere as intended. Rubbergum is immediately waterproof and will gain addional strength over me.

www.insigniashowers.com Last Modied: 17/05/2021
06

www.insigniashowers.com Last Modied: 17/05/2021
07
We recommend a BAR pressure between 2.5 and 3.4 BAR. If
you have a combi boiler system no problem should be
experienced. If you have a gravity feed older type installaon
(hot water tank type usually less than 1 BAR) you will almost
certainly need a pump. We cannot advise on which type of
pump is used, locaon or design because all house plumbing
layouts vary. This is a job for your installer/plumber. The end
delivery however must fall within the scope above.
Important Note Do not exceed 3.4 BAR pressure under any
circumstances. Warranty is void if so as damage will occur. If
you have a combi supply, please use a pressure reducing valve
if required to lower the BAR pressure to the shower.
Please Remember that this product is free standing and is
designed to be pulled away from the wall.
The waste hose must be of a exible type (1m exible waste
supplied).
The water supply pipes must be that of a exible braided type
(not supplied).
DO NOT OVERTIGHTEN THE BRAIDED HOSES AS IT CAN CAUSE
THE CONNECTION TO POP AFTER A FEW WEEKS OF USE.
Always t easy to get to isolaon taps on both hot and cold
water supply (not supplied). Just like a dishwasher or washing
machine, this product MUST be isolated when not in use.
• Scissors
• Knife
• Spirit Level
• Tape Measure
Pressure/Water Requirements Tools Required
• RubberGum (supplied)
• Plumbers Mait (not supplied)
• Hot and cold isolaon valves (not supplied)
• 2x Braided hoses (not supplied) Steam version
requires 3. If you haven’t purchased these already,
simply click the following link below or copy in to
any web browser. For ease we have listed the
required pack below for your install.
• Shower cabins with steam require pack 2
hps://www.insigniashowers.com/wras-approved-
braided-hoses.html
Parts Required
STEAM VERSION
Voltage Rang 220-240AC
Frequency Rang 50Hz
Power Rang 3KW
NON-STEAM VERSION
Voltage Rang 100-240AC
Frequency Rang 50/60Hz
Power Rang 12v DC/1500 mA
Your electrical contractor should understand ALL legal
requirements of connecon before undertaking any work
or installaon.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS
YOURSELF!!!
Note for electrician: This product comes with 13 amp plug
(s) ed with an RCD unit (steam version only). We leave it
this way for you to connect it your own way due to
connued addions to current regulaons.
1) Connect within current laws and IP direcves.
2) (Preferred) Wire into isolated fused feed connecng
directly to the house consumer/service box.
Always use protecon against electrical surge. Your shower
should be treated the same as a home computer. A surge
protector should eradicate the possibility of either the
Electrical Requirements
You will require:
• Philips Screwdriver
• Electric Drill
• Safety Gloves
• Safety Glasses

www.insigniashowers.com Last Modied: 17/05/2021
08
What’s in the Boxes?
Box Contents Quanty
Tray Shower Tray
Waste + Hose
Glass Shelf
Riser Rail for hand shower
Screw Pack
Shower hose
1
1
1
1
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
Glass Room Glass Door
Side Panels
1
1
[ ]
[ ]
Column Complete Column
Hand Shower
1
1
[ ]
[ ]
Backwall
Pack
Le Back Panel
Right Back Panel
Font Fixed Panel
1
1
1
[ ]
[ ]
[ ]
Framework Top Rail
Boom Rail
Outer Fixed Uprights
Inner upright post
Magnec door seal
Rear ap door seal
Flexible seal (12mm)
Flexible seal (7mm)
1
1
2
2
1
1
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
Roof Roof with ngs 1[ ]
Screw Pack Contents
Product Code Descripon Quanty
SP097 Door Handle 1
SP276
SP276A
Twin Door Wheels Non-Push
Twin Door Wheels Push buon
2
2
ST8 8mm Screws 12
ST10 10mm Screws 12
ST16 16mm x 3.5mm Screws 8
ST16 16mm x 4mm Screws 6
ST20 or WN20 20mm Nut and Bolt or Wing Nut 12
AMI01 Jubilee Clip (For steam version only) 1
SW9 Small Washers 20
DB9 Drill Piece 1
VERY IMPORTANT
Have you got everything? If not please contact the Insignia directly on 01908 317 512.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.

www.insigniashowers.com Last Modied: 17/05/2021
09
Twist to adjust
Step 1 — Level the Tray and connecng the waste
NOTE: FOR STEAM SHOWERS ONLY:
Check the Spigot is drilled out prior to
ng. If it isn’t ensure you drill it out!

www.insigniashowers.com Last Modied: 17/05/2021
10
Step 2 — Connecng the framework
Wider rail on top
Narrow rail at the boom
1
2
3
Internal View
Framework securing clips x4

www.insigniashowers.com Last Modied: 17/05/2021
11
Step 3 — RubberGum the tray
Apply RubberGum to raised
secons of the tray and remove
backing paper.

www.insigniashowers.com Last Modied: 17/05/2021
12
Step 4 — Connecng the le back panel to le side panel
ST10 x6
DO NOT SCREW BACK PANELS TO THE TRAY.
PRESS PANELS
DOWN FIRMLY
ON TO THE
RUBBERGUM.

www.insigniashowers.com Last Modied: 17/05/2021
13
Step 5 — Connecng the le corner upright to the side panel
Internal View

www.insigniashowers.com Last Modied: 17/05/2021
14
Step 5 — Connecng the le corner upright to the side panel connued
ST16 3.5 x3
DB 9

www.insigniashowers.com Last Modied: 17/05/2021
15
Step 6 — Connecng the framework into the upright.
ST16 4 x3
DB 9

www.insigniashowers.com Last Modied: 17/05/2021
16
Step 7 — Column Connecon
Rear View (aach nuts and bolts or wing nuts from rear)
Below diagram shows the nut/bolt install
————————
SW9 x 12
ST20 x 12
or
WN20 x 12
————————
or

www.insigniashowers.com Last Modied: 17/05/2021
17
Step 8 — Corner post to framework connecon

www.insigniashowers.com Last Modied: 17/05/2021
18
ST16 4 x3
DB 9
Step 8 — Corner post to framework connecon connued

www.insigniashowers.com Last Modied: 17/05/2021
19
Step 9 — Connecng the right side panel

www.insigniashowers.com Last Modied: 17/05/2021
20
Step 9 — Connecng the right side panel connued
ST16 3.5 x3
DB 9