Insignia ES009 User manual

www.insigniarange.com Last Modied 06/03/2019
ATTENTION INSTALLERS:
These instrucons must be
le with the customer
30 Day Technical Support: 01908 226545
(NOTE: This service is only available to customers from the day of delivery,
please have your supplier’s details and your postcode to hand before calling)
Replacements Parts: inside of your warranty contact:
www.insigniarange.co.uk/customerservice.aspx
Spares/Replacements Parts: outside of your warranty
contact 0844 800 3069
www.insigniarange.co.uk
WARRANTY REG NO: __________________________
To upgrade to a full 5 year warranty, visit hps://www.insigniaoutlet.co.uk/extended-warranty.html Standard 24 month
warranty applies without the upgrade.
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!
INSTALLATION MANUAL
ES009

www.insigniarange.com Last Modied 06/03/2019
02
Contents
Introduction
Electrical Requirements
Plumbing Requirements
What’s In The Boxes?
Screw Pack Contents
Schematics
Starting The Installation
Electrical Connections
Steam Generator Connections
Sealing and Water Testing
Control Panel Instructions
Help Book Information
Parts list
3
4
5
6
8
10
11
27
28
29
30
31
32

www.insigniarange.com Last Modied 06/03/2019
03
Thank you for your recent purchase of an Insignia shower. Please read this booklet with great care to ensure you get the best out of your build and have a shower that
will last for many years to come!
Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of
your finish.
OUR BADGE RATING IN TERMS OF DIFFICULTY OF ASSEMBLY IS BASED ON CLIENT FEEDBACK
1 Badge = Very easy
2 Badges = Easy
3 Badges = Moderate
4 Badges = Harder than average
5 Badges = Professional skills required
This shower is rated 5 Badges

www.insigniarange.com Last Modied 06/03/2019
04
TOTAL ELECTRICAL REQUIREMENTS
Voltage Rating 220 -240AC
Frequency Rating 50HZ
Power Rating 2.8KW
Your electrical contractor should understand ALL legal requirements of connection before undertaking any work or installation.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF!!!
Note for electrician. This product comes with 13 amp plug(s) fitted with an RCD unit. We leave it this way for you to connect this your own way
due to continued additions to current regulations.
1) Connect within current laws and IP directives.
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box.
Always use protection against electrical surge. Your shower should be treated the same as a home computer. A surge protector should
eradicate the possibility of either the transformer or control panel being burnt out.

www.insigniarange.com Last Modied 06/03/2019
05
ASSEMBLY AND PLUMBING
THIS PRODUCT BUILD IS RATED SUITABLE FOR DIY PURPOSES PROVIDING THE CUSTOMER IS OF ABOVE AVERAGE SKILL AND FEELS CONFIDENT IN
THEIR ABILITY. ONLY YOU THE CUSTOMER WILL KNOW THIS SO BEFORE ANY ATTEMPT IS MADE TO ASSEMBLE, READ THROUGH THE FOLLOWING
PAGES IN DETAIL THEN DECIDE. IF YOU HAVE ANY DOUBT USE THE SERVICES OF A PROFESSIONAL. IN PICKING SUCH, ALLOW THEM TO DECIDE IF
THEY ARE CAPABLE OF BUILD BY FIRST SHOWING THESE INSTRUCTIONS TO THEM. ALWAYS GET THREE QUOTES.
REMEMBER THE BEST IS NOT ALWAYS THE CHEAPEST!
REMEMBER PLUMBERS PLUMB! 90% OF THIS JOB IS NOT PLUMBING!
DUE TO THE NATURE OF THIS PRODUCT WE HIGHLY ADVISE THE PURCHASE AND FITTING OF A WATER SOFTENER
(PLEASE NOTE LIMESCALE BUILD UP MAY CAUSE DAMAGE TO YOUR SHOWER AND WILL NOT BE COVERED UNDER WARRANTY)
ELECTRICAL CONNECTION TO HOUSE MAINS
WHEN YOUR ITEM IS ASSEMBLED ALWAYS USE THE SERVICES OF A FULLY QUALIFIED ELECTRICAN COMPANY TO COMPLETE THE CONNECTION FROM
SHOWER TO THE HOUSE SUPPLY. LAWS DEMAND IN MANY CASES YOU DO THIS AND YOUR WARRANTY IS VOID IN REGARDS TO THE ELECTRICAL
ITEMS IF THIS IS NOT UNDERTAKEN.
YOURS AND OTHERS SAFETY IS PARAMOUNT. NEVER ATTEMPT THIS YOURSELF!
REMEMBER:
These showers are designed to be free standing and movable from their location should you have the need to replace anything. ALWAYS USE Flexible braided water
inlet pipes (not supplied) at least a metre long (not central heating plastic type!)
Always use a flexible waste pipe from your house supply to the shower .
NEVER FIX with rigid pipes, NEVER FIX the unit to the wall.
DURING BUILD, LIKE ALL SHOWERS CORRECT SEALING IS IMPERATIVE.
If you are using Insignia’s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the RubberGum to fail and
will not adhere as intended.
ATTENTION
ALWAYS FIT EASY TO GET TO ISOLATION TAPS ON BOTH THE HOT AND COLD WATER SUPPLY (NOT SUPPLIED). JUST LIKE A
DISHWASHER OR WASHING MACHINE, THIS PRODUCT MUST BE ISOLATED WHEN NOT IN USE.
FLEXIBLE SUPPLY HOSES (NOT SUPPLIED) COUPLE HERE AS ORIGIN OF SUPPLY

www.insigniarange.com Last Modied 06/03/2019
06
Column
1x Complete Column
2x Front Fixed Rails
2x Curved Rails
2x Aluminium curved end posts
2x Rear Door Seals
Backwalls
1x Left Panel Backwall
1x Right Panel Backwall
Sidewalls
2x Side Glass
2x Corner Posts
Bath Box
1x Bath
1x Roof
1 x Screw Pack
1 x Accessory Box
Glass Room
4x Door seals
2x Glass doors
2x Fixed glass
2 x Aluminium curved end posts
Whilst the next steps show you how to assemble your shower we want to make sure you have a correct build to ensure you get a trouble free shower. Therefore our advice
is to follow the instructions and perform a dry run to ensure you are confident with the build and you understand fully how the unit is assembled. When we use the word
“DRY RUN” this means you do not silicone anything, just simply construct the shower, align, drill and screw everything together. Once you are happy with the build take the
unit apart and carry out the final fix.
What’s In The Boxes?
In addition to above you will have all the required internal
accessories to complete the shower

www.insigniarange.com Last Modied 06/03/2019
07
Scissors Stanley Blade Silicone Gun Spirit Level Tape Measure Philips Screwdriver Electric Drill
Tool Requirements
None Supplied
Adhesive Requirements
Bacteria Resistant Sanitary Silicone - (for vertical joints) RubberGum Plumbers Mait (for waste joints)
Not Supplied
Not Supplied Not Supplied
Hardware Requirements
A Steam Shower requires 3 x 1 Metre Braided Hose
Not Supplied

www.insigniarange.com Last Modied 06/03/2019
08
ES009 Screw Pack
VERY IMPORTANT
Have you got everything? If not please contact the Insignia Support Line on 01908 226545. Remember NEVER book your tradesman until everything has arrived, been
checked and is present. No replacement/missing parts can be obtained free of charge during or after the build. Any claims can only be within the timescale permitted (48
hours after delivery) and always BEFORE build.
Product Code Descripon Quanty
SP097 Door Handles 2
SP276
SP276A
Twin Door Wheels
Twin Door Wheels Push Buon
4
4
ST10 10mm Screws 8
ST12 12mm Screws 16
ST16 16mm Nut and Bolt 10
ST20 20mm Screws 10
ST30 (3.5) 30mm Screws with a 3.5mm thread 8
ST30 (4) 30mm Screws with a 4mm thread 4
SW9 Small Washers 22
HW Hose Washers 3
DB9 Drill Piece 1

www.insigniarange.com Last Modied 06/03/2019
09
Pressure Requirements from your house supply
We recommend a bar pressure between 2.5 and 3.4 BAR. If you have a combi boiler system no problem should be experienced. If you have a gravity feed older type
installation (hot water tank type usually less than 1 bar) you will almost certainly need a pump. We cannot advise on which type of pump is used, location or design because
all house plumbing layouts vary. This is a job for your installer/plumber. The end delivery however must fall within the scope above.
Important Note Do not exceed 3.4 BAR pressure under any circumstances. Warranty is void if so as damage will occur. If you have a combi supply, please use a pressure
reducing valve if required to lower the BAR pressure to the shower.
Please Remember that this product is free standing and is designed to be pulled away from the wall.
The waste hose must be of a flexible type (1m flexible waste supplied).
The water supply pipes need to be at least 1 metre in length and must be that of a flexible braided type (not supplied).
DO NOT OVERTIGHTEN THE BRAIDED HOSES AS IT CAN CAUSE THE CONNECTION TO POP AFTER A FEW WEEKS OF USE

www.insigniarange.com Last Modied 06/03/2019
10

www.insigniarange.com Last Modied 06/03/2019
11
Step 1 — Level the Tub

www.insigniarange.com Last Modied 06/03/2019
12
Step 2 — Adjusng the feet and ng the bath ller

www.insigniarange.com Last Modied 06/03/2019
13
Step 3 — Aaching back panels to side panels (Click-Clack)
(Birds eye view)
Run a bead of silicone on the
top of the side glass skirt.
Silicone = Red
RubberGum = Blue

www.insigniarange.com Last Modied 06/03/2019
14
ST16 Nut and Bolt
Step 4 — Aaching the column
Silicone = Red
RubberGum = Blue

www.insigniarange.com Last Modied 06/03/2019
15
Step 5 — Front xed frame connecon
ST35 x2
ST35 x2ST35 x2
ST35 x2
(Birds eye view)
Front

www.insigniarange.com Last Modied 06/03/2019
16
Step 6 — Corner Post Connecon
ST14
(Internal View)

www.insigniarange.com Last Modied 06/03/2019
17
Step 7 — Insert xed glass

www.insigniarange.com Last Modied 06/03/2019
18
Step 8 — Connect Inner Uprights (Do NOT overghten)
ST20
ST30

www.insigniarange.com Last Modied 06/03/2019
19
Step 9 — Aach frame to shower
Silicone = Red
RubberGum = Blue

www.insigniarange.com Last Modied 06/03/2019
20
Step 10 — Inserng the tapered seals — (inside of the xed panel)
Seal top view
Seal side view
(Internal View)