Ironwood Glacier G42SA User manual

GLACIER ALPINE / TERRAIN
LIBRARY SHELVING UNIT
G42SA G48SA
G60SA G72SA
G84SA
SINGLE FACED
ADDER UNIT
0115
BY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].

PARTS DIAGRAM
HARDWARE
C
G42SA
G48SA
GT60SA
G72SA
G84SA
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
H7 Varianta Screw 988060 8 ea.
H1 Metal Spanner LS-MB 1 ea.
Spanner 01026089 2 ea.
F
Divider
Panel
The diagram show one size for ease of viewing. Any differences will be indicated in each part’s description.
E
Top Panel 01026001 1 ea.
D
Toe Kick 01026072 1 ea.
H3 Minifix Cam 909810 12 ea.
H5 Tab-V Housing 909930 4 ea.
H6 Screw in Tab V 909931 4 ea.
H8 #8 x 5/8"
Panhead Screw 988056 2 ea.
H4 Minifix Bolt 909834 12 ea.
.5 ea.
1 ea.
1 ea.
1 ea.
1 ea.
G42-Back
G48-Back
G60-Back
G72-Back
G84-Back
H2 Back
Panel
102361/65
102358/62
102359/63
102360/64
102361/65
01026144
01026344
01026544
01026744
01026944

it is important to read all the way through the Adder instructions
(enclosed in the Adder carton) before beginning. It will be necessary
to substitute a Divider (J) for a Right Side (B) during assembly.
NOTE:
The diagrams show one size for ease of viewing.
Any differences will be indicated in each step
’ s text.
If you have purchased an Adder unit
to be assembled in conjunction with this Base unit,

Using a plastic mallet, tap in the
plastic housings with the flat
edge facing outwards until flush
with the surface.
IMPORTANT! The flat
edge of the plastic
housing must be
aligned with the shelf
edge. Plastic Housings
cannot be repositioned
once installed.
For a Fixed Shelf or Top,
install the metal flange using a
System (Varianta) Screw as
shown. DO NOT over tighten!
For an Adjustable Shelf, use
the Metal Shelf Clip.
Slide the shelf into place over
the Metal Flanges and push
down until fully seated.
Turn the rotating portion (Cam)
1/2 turn to lock in place.
To remove, simply turn the
Cam counter clockwise 1/2
turn and lift the shelf off of the
Metal Flanges.
ALIGNED
FLAT
EDGE
USING THE TAB-V SYSTEM:
ADJUSTABLE
FIXED

ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
H4
F- RIGHT SIDE
F- LEFT SIDE
H4
H6/H7H6/H7
H6/H7H6/H7
H4 H4
H4 H4
H4 H4
H4 H4
H4 H4
Screw in Minifix Bolt (H4) into the corresponding locations.
Place Screw in Tab V (H6) and secure by using Varianta Screw
(H7). Flip the Divider over and repeat previous steps.
#1
H4
H6 H7

#3 Insert Tab V Housing (H5) into the holes of the Top Panel.

H5
H5
H5
H5
H5
#2 Insert Minifix Cam (H3) into the corresponding holes on the
spanner and Toe Kick Panels.

C
C
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
Part D has no Edgeband
E
E
GLACIER ALPINE GLACIER TERRAIN
#4 Remove shelves and
Top Panel (E).

B
H1
DH3
C
H3
#5 Remove Back Panel.
Remove screws from
one side of metal
spanner (H1). Loosen
Minifix Cams (H3) on
one side. Remove
Right Panel (B).
F
H1
D
C
C
#6 Attach Divider Panel to Unit
and secure by tightening
Minifix Cams (H3) and
inserting Varianta Screws
(H7) to Metal Spanner (H1).
#7
F
D
C
C
H1
H1
D
C
C
H3
H3
H3
H7
Attach spanners and Toe Kick
to the other side of Divider
Panel (F) and secure using
Minifix Cams (H3) and
Varianta Screws (H7).

B
F
Attach Right Panel (B) to unit and secure using
Minifix Cams (H3) and Varianta Screws (H7).
#8
#9
Insert Top Panels (E) and
Secure using Screw in
Tab V System. E
E
#10
Slide in Back Panel (H2)
and hold in place by
screwing in Panhead
Screws (H8) into Bottom
Spanner (C). H2
H2

#11 Insert Shelf Clips and insert Shelves (see Shelving Assembly Sheet)
GLACIER ALPINE GLACIER TERRAIN