Ironwood GLACIER PBS42DA User manual

0307
PICTURE BOOK
SHELVING
PBS42DA
PBS48DA
DOUBLE ADDER UNIT
BY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].

D
J
PARTS & HARDWARE
C
Divider - PBS42DA
Divider - PBS48DA 01021344
01021744 1 ea. 1 ea.
4 ea.
6 ea.
412226
H2 Book Stop - PBS42
Book Stop - PBS48
4 ea.
6 ea.
01024724
Shelving - PBS42
Shelving - PBS48
16 ea.
909931
H4 Tab-V Metal
Flange
24 ea.
32 ea.
909930
H1 Tab-V Plastic Housing - PBS42
Tab-V Plastic Housing - PBS48
8 ea.
16 ea.
909932
H7 Tab-V Metal Shelf Clip - PBS42
Tab-V Metal Shelf Clip - PBS48
16 ea.
24 ea.
490571
H8 Wire Divider - PBS42
Wire Divider - PBS48
30 ea.
40 ea.
988056
H3 #8 x 5/8” Panhead Screw - PBS42
#8 x 5/8” Panhead Screw - PBS48
H6 Metal Frame 412026 1 ea.
Top 01021102 1 ea.
H5 Varianta Screw 988060 16 ea.

NOTE:
The diagrams show one size for ease of viewing.
Any differences will be indicated in each step ’ s text.
it is important to read through the Back option
and/or Toe Space option directions before beginning.
If you have purchased the Back option or the Toe Space option
to be assembled in conjunction with this Base unit,

Using a plastic mallet, tap in the
plastic housings with the flat
edge facing outwards until flush
with the surface.
IMPORTANT! The flat
edge of the plastic
housing must be
aligned with the shelf
edge. Plastic Housings
cannot be repositioned
once installed.
For a Fixed Shelf or Top,
install the metal flange using a
System (Varianta) Screw as
shown. DO NOT over tighten!
For an Adjustable Shelf, use
the Metal Shelf Clip.
Slide the shelf into place over
the Metal Flanges and push
down until fully seated.
Turn the rotating portion (Cam)
1/2 turn to lock in place.
To remove, simply turn the
Cam counter clockwise 1/2
turn and lift the shelf off of the
Metal Flanges.
ALIGNED
FLAT
EDGE
USING THE TAB-V SYSTEM:
ADJUSTABLE
FIXED

ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
Install Plastic Housings (H1) into all Shelves (D). Refer to “Using the Tab-V System” on the
previous page.
Attach a Book Stop (H2) to each Shelf (D) using Panhead Screws (H3) in the pre-drilled holes.
#1
H2
H3
E
H1
H1
H1 D

Place the Divider (J) on a clean, carpeted
surface as shown. Install 16 Tab-V Metal
Flanges (H4) using 16 Varianta Screws (H5).
#3
H5
H4
J
TOP SET OF
HOLES FOR
TOP PANEL
4th SET OF
HOLES FOR
BOTTOM SHELF
H5
H4
#2 Install eight Plastic Housings
(H1) into the Top Panel (C)
as shown.
C
H1
H1
H1
If you are attaching the Adder unit to a
previously assembled Base unit, it will be
necessary to partially disassemble the unit.
Remove all the Wire Dividers, Shelves (D) and
the Top (C).
#4 C
B
D
D

With the assistance of another person,
remove one Side Panel.
#5
BACK PANEL METAL FRAME
H3
Remove five Panhead Screws (H3).
Rotate the 4 Rafix Cams (H8) counter
clockwise to unlock.
Attach the Divider Panel (J).
#6
BACK PANEL METAL FRAME
H3
Use five #8 x 5/8" Panhead Screws (H3).
Rotate the 4 Rafix Cams (H8) clockwise
to secure.

#7 Attach the Top Panel (C) and the Bottom Shelves (D). Be sure to turn the Tab-V
Cams (H1) 1/2 turn to tighten.
BACK PANEL METAL FRAME
#8
BACK PANEL METAL FRAME
Attach either a Metal Frame (H6) or Back Panel (D) as shown.
Attach the Right Side (B) as shown. For a metal Frame use five Panhead Screws (H3). For a
3/4" Back, lock the Rafix Cams (H8).

BACK PANEL METAL FRAME
#9 Assemble the Top Panel (C) and the Fixed Shelf (E) to the unit as shown.
Lock the Tab-V Cams (H1) to secure the parts in place.
#10 Insert shelf pins (H6) at desired shelf heights. Place the
Adjusting Shelves (E) in the unit.

#11
Your Glacier Picture Book Shelving Unit
is now assembled and ready for use.