Ironwood Glacier LS42DA User manual

LIBRARY SHELVING UNIT
LS42DA LS48DA
LS60DA LS72DA
LS84DA
DOUBLE ADDER UNIT
0708
BY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].

PARTS DIAGRAM
HARDWARE
C
E
LS42DA
LS48DA
LS60DA
LS72DA
LS84DA
01300144
01300244
01300344
01300444
01300544
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
LS42DA - 6 ea.
LS48DA - 6 ea.
LS60DA - 8 ea.
LS72DA - 10 ea.
LS84DA - 12 ea.
412226
H2 Book Stop
H5 Varianta Screw 988060 16 ea.
H4 Tab-V Metal
Flange 909931 16 ea.
LS42DA - 16 ea.
LS48DA - 16 ea.
LS60DA - 24 ea.
LS72DA - 32 ea.
LS84DA - 40 ea.
909932
H7 Tab-V Metal
Shelf Clip
LS42DA - 40 ea.
LS48DA - 40 ea.
LS60DA - 50 ea.
LS72DA - 60 ea.
LS84DA - 70 ea.
988056
H3 # 8 x 5/8"
Panhead
Screw
H6 Metal Frame 412026 1 ea.
Top 01300101 1 ea.
The diagram show one size for ease of viewing. Any differences will be indicated in each part’s description.
Fixed/
Adjustable
Shelf 01200124
6 ea.
6 ea.
8 ea.
10 ea.
12 ea.
J
LS42DA - 32 ea.
LS48DA - 32 ea.
LS60DA - 40 ea.
LS72DA - 48 ea.
LS84DA - 56 ea.
909930
H1 Tab-V
Plastic
Housing
Divider
LS42DA
LS48DA
LS60DA
LS72DA
LS84DA

NOTE:
The diagrams show one size for ease of viewing.
Any differences will be indicated in each step
’ s text.
it is important to read through the Back option
and/or Toe Space option directions before beginning.
If you have purchased the Back option or the Toe Space option
to be assembled in conjunction with this Base unit,

Using a plastic mallet, tap in the
plastic housings with the flat
edge facing outwards until flush
with the surface.
IMPORTANT! The flat
edge of the plastic
housing must be
aligned with the shelf
edge. Plastic Housings
cannot be repositioned
once installed.
For a Fixed Shelf or Top,
install the metal flange using a
System (Varianta) Screw as
shown. DO NOT over tighten!
For an Adjustable Shelf, use
the Metal Shelf Clip.
Slide the shelf into place over
the Metal Flanges and push
down until fully seated.
Turn the rotating portion (Cam)
1/2 turn to lock in place.
To remove, simply turn the
Cam counter clockwise 1/2
turn and lift the shelf off of the
Metal Flanges.
ALIGNED
FLAT
EDGE
USING THE TAB-V SYSTEM:
ADJUSTABLE
FIXED

ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
H2
H3
E
H1
H1
Install four Plastic
Housings (H1) into
each shelf. Attach a
Book Stop (H2) to
each Fixed/Adjustable
Shelf (E) using five
Panhead Screws (H3)
in the pre-drilled holes.
#1
#2
Install eight Plastic
Housings (H1) into the
Top Panel (C) as shown.
H1
C
H1
H1
H1
H1
H1
H1
H1
H1

#3 Install Metal Flanges (H4) using Varianta Screws (H5) in each side of the Divider
Panel (J) into the selected pre-drilled holes as indicated.
DIVIDER
PANEL
FOURTH SET
OF HOLES
FROM BOTTOM
TOP SET OF HOLES
H4/H5
H4/H5
H4/H5
H4/H5
H4/H5
H4/H5
H4/H5
H4/H5
H4 H5
For previously assembled
bases, it will be necessary
to remove all the Shelves,
and the Top.
#4

With the assistance of another person, remove one side Panel.
#5
METAL FRAME 3/4" FRAME
JJ
METAL FRAME 3/4" FRAME
Attach the divider Panel (J).
#6

#7
E
E
METAL FRAME 3/4" BACK
E
E
C
C
Attach the Top Panel (C) and the two Fixed Shelves (E) using the Tab-V System.
Turn the Tab-V Cams 1/2 turn to tighten.
For a Metal Frame:
Attach a Metal Frame (H6) and the Side
Panel (A) using ten #8 x 5/8" screws (H3).
#8
A
D
3/4" BACKMETAL FRAME
H6
H3 H3
H8 H8
H3 H9 H8
For a 3/4" Back:
Attach a Back Panel (D) and the Side Panel (A)
using the Rafix System as shown in the
instructions for the Back Panel.

#10
Insert Metal Shelf Pins (H7)
into both Sides at the preferred
heights.
Place the Adjustable Shelves
(E) into each side of the unit
and lock the Tab-V Cams to
secure.
H7
H7
H1

Your Glacier Library Shelving
unit is now assembled and
ready for use.
#11