Ironwood Glacier GLT User manual

04/10
GLT
LIBRARY TABLES
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You will need a 1/2" wrench. To protect
your new furniture from damage during assembly, it
is recommended to work on a carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
BY

PARTS DIAGRAM
A
B
Lock Nut 4 ea.
Legs 4 ea.
Table Top 1 ea.
Place the Table Top (A) on
a clean, carpeted surface or
foam padding as shown.
#1
H2390

Remove the protective
cover from the leg bolt.
Insert the four Legs (B)
into the frame of the
Table Top (A) as shown.
#2
With the assistance of
another person, turn the table
upright. Adjust the levelers of
the Legs (B) when the Library
Table is in place.
#3
Secure each Leg (B)
in place with a Lock
Nut (C) as shown.
#4
B
B
B
LEVELER
C
Your Glacier Table is now assembled and ready for use.