Ironwood GLACIER PBS42SA User manual

02/05
PICTURE BOOK
SHELVING
PBS42SA
PBS48SA
SINGLE ADDER UNIT
BY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
48” w/Metal Frame
42” w/Back Panel

PARTS DIAGRAM
HARDWARE
JC
D
Divider - PBS42SA
Divider - PBS48SA
01020144
01020444
1 ea.
1 ea.
H4 Tab-V Metal
Flange 909931 8 ea.
H6 Metal Frame 412026 1 ea.
H8 Wire Dividers - 42”
Wire Dividers - 48” 490571 8 ea.
12 ea.
H7 Tab-V Metal Shelf Clip - 42”
Tab-V Metal Shelf Clip - 48” 909932 4 ea.
8 ea.
H3 Panhead Screw - 42”
Panhead Screw - 48” 988056 20 ea.
25 ea.
H2 Book Stop - 42”
Book Stop - 48” 412226 2 ea.
3 ea.
H1 Tab-V Plastic Housing - 42”
Tab-V Plastic Housing - 48” 909930 12 ea.
16 ea.
Top 01020102 1 ea.
Shelves 01024721 2 ea.
3 ea.
PBS42SA
PBS48SA
H5 Varianta Screw 988060 8 ea.

NOTE:
The diagrams show one size for ease of viewing.
Any differences will be indicated in each step ’ s text.
it is important to read through the Back option
and/or Toe Space option directions before beginning.
If you have purchased the Back option or the Toe Space option
to be assembled in conjunction with this Base unit,

Using a plastic mallet, tap in the
plastic housings with the flat
edge facing outwards until flush
with the surface.
IMPORTANT! The flat
edge of the plastic
housing must be
aligned with the shelf
edge. Plastic Housings
cannot be repositioned
once installed.
For a Fixed Shelf or Top,
install the metal flange using a
System (Varianta) Screw as
shown. DO NOT over tighten!
For an Adjustable Shelf, use
the Metal Shelf Clip.
Slide the shelf into place over
the Metal Flanges and push
down until fully seated.
Turn the rotating portion (Cam)
1/2 turn to lock in place.
To remove, simply turn the
Cam counter clockwise 1/2
turn and lift the shelf off of the
Metal Flanges.
ALIGNED
FLAT
EDGE
USING THE TAB-V SYSTEM:
ADJUSTABLE
FIXED

Install four Plastic Housings
(H1) into each shelf. Attach a
Book Stop (H2) to each
Fixed/Adjustable Shelf (E)
using five Panhead Screws
(H3) in the pre-drilled holes.
#1
H2
H3
E
H1
H1
#2
Install four Plastic Housings
(H1) into the Top Panel (C) as
shown. C
H1
H1
H1
H1
H1
Place the Divider (J) on a clean, carpeted surface as shown.
Install four Tab-V Metal Flanges (H4) using Varianta Screws (H5), into each
side of the panel.
#3
J
J
H4/H5 H4/H5
H4/H5
H4/H5
TOP SET OF HOLES
FOURTH SET OF HOLES FROM BOTTOM TOP SET OF HOLES
FOURTH SET OF HOLES FROM BOTTOM
FRONT
FRONT
TOP
H5
H4
D

If you are attaching the Adder unit to a previously assembled Base
unit, it will be necessary to partially disassemble the unit.
Remove all the Shelves and Top.
H3
METAL FRAME
3/4" BACK
B
B
CAMS
H3
METAL FRAME
3/4" BACK
CAMS
J
J
Remove one Side Panel, with the
assistance of another person.
#4
Remove five Panhead
Screws (H3).
Turn Rafix Cams 1/2 turn counter
clockwise to loosen.
Attach the Divider Panel.
#5
Use five #8 x 5/8"
Panhead Screws (H3).
Turn Rafix Cams 1/2 turn
clockwise to tighten.

#6
C
J
A
METAL FRAME
H3
C
J
A
3/4" BACK
CAMS
Attach the Top Panel and the Bottom Shelf.
Be sure to turn the Tab-V Cams (H1) 1/2 turn to tighten.
#7 Attach either a Metal Frame (H6) or
Back Panel as shown.
C
J
A
METAL FRAME METAL FRAME
H3
C
J
A
3/4" BACK
3/4" BACK
CAMS

#8 Attach the Right Side (B) as shown.
H3
JB
CAMS
J
B
For a metal Frame use five Panhead Screws (H3).
For a 3/4" Back, lock the Rafix Cams.

Insert shelf pins (H6) at desired
shelf heights. Place the Shelves
in the unit.
#10
Attach the Top Panel and the Shelves to the unit as shown. Lock the Tab-V Cams (H1) to
secure the parts in place.
#9
Unit with Back Panel.
Unit with Metal Frame.

Your Glacier Picture Book Shelving Unit is now assembled and ready for use.
#11
48” Metal Frame
48” w/Back Panel
42” Metal Frame
42” w/Back Panel