Ironwood TSU User manual

0908
TSU
TOWER
SECURITY UNIT
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].

A
PARTS DIAGRAM
B
J
D
E
C
Left Side 06005641 1 ea. Right Side 06005641 1 ea.
Top 06005601 1 ea.
Right Door 06005673 1 ea.
Bottom 06005611 1 ea.
Back 06005657 2 ea.
I
Left Door 06005673 1 ea.
L
Divider 06005644 1 ea.
G
Monitor Shelf 06005631 1 ea.
K
Keyboard Shelf 06005628 1 ea.
P
Printer Shelf 06005629 1 ea.

H10 Swivel Casters 402640 4 ea.
H4 CD Rack 286420 2 ea.
H7 Varianta Screw 988060 12 ea.
H2 Wood Dowel 195000 22 ea.
H3 Minifix Bolt 909834 26 ea.
H1 Minifix Cam 909810 26 ea.
H6 Hinge H0590 4 ea.
H11 #14 x 3/4"
Panhead Screw 901241 16 ea.
H13 Door Pull 400800 2 ea. H14 1" Panhead
Screw 901314 4 ea.
HARDWARE
H5 #6 x 5/8"
Panhead Screw 901216 8 ea.
H16 #6 x 5/8"
Flathead Screw 901120 4 ea.
H17 #8 x 5/8"
Flathead Screw H2040 36 ea.
Shelf Slide 490260 2 pr.
S4
S3
Slide Channel 490260 2 pr.
S2
S1

ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
H5 #6 x 5/8"
Panhead Screw 901216 2 ea. H8 Catch Plate 452340 1 ea.
H9 #8 x 5/8"
Panhead Screw 988056 4 ea.
H12 Stop Plate 452330 1 ea.
LOCKSET 250-HP
H15 Lock & Key Set
452310
452320
452350
1 ea.
1 ea.
1 ea.

Place the Divider (L) on a clean,
carpeted surface with the pre-
drilled holes facing up. Insert two
Minifix Cams (H1) into the
Divider with the arrows of the
cams facing out.
#1
Insert eight Dowels (H2) into each
Side (A & B) where indicated.
#3
Place Left Side (A) and Right
Side (B) with the pre-drilled
holes facing up. Insert three
Minifix Cams (H1) into each
side with the arrows of the
cams facing out.
#2
H1
H1
H2

#4
Screw nine Minifix Bolts
(H3) into each Side (A & B)
where indicated.
#5
Attach a CD Rack (H4) to each
Side (A & B) using #6x5/8"
Flathead Screws (H16) as shown.
NOTE: The nubs on the CD Rack
should face up as indicated.
#6 With a screwdriver, attach the Hinges (H6) to the Left Side (A)
using the #8 x 5/8" Flathead Screws (H17) in the pre-drilled
holes. The screws must
be centered in the slots
of the Hinges as shown.
H3
H17
H17
H17
H16
H17

#8
#9
With a screwdriver, attach the Hinges (H6) to the Right Side (B) using the
#8 x 5/8" Flathead Screws (H17) in the pre-drilled holes. The screws must
be centered in the slots
of the Hinges as shown.
#7
Attach the two left Slide Channels (S1) to the Left
Side (A) using six Varianta Screws (H7) into the pre-
drilled holes where indicated.
H17
H17
H17
LAST HOLE
AT END
6TH HOLE
FROM ROLLER
2ND HOLE
FROM ROLLER
H7
A
B
H7
Attach one right Slide Channel (S2) to the Right Side (B) using
three Varianta Screws (H7) into the pre-drilled holes as indicated
in Step #8.
Attach the other right Slide Channel to the Divider (L) using
three Varianta Screws.
S1
S2
L
H17

Insert six Minifix Cams (H1) into Top (C), four cams into both Backs (D), where indicated
with the arrows of the cams facing out.
#12
Screw eight Minifix Bolts (H3) into
the Bottom (E) where indicated.
#11
#10
Insert six Dowels (H2) into the
Bottom (E) where indicated.
Insert four Minifix Cams (H1) into
the Monitor Shelf (G) with the
arrows of the cams facing out.
#13

#14
#15
C
A
FRONT
FRONT
H1
#16
CD
A
H1
FINISHED EDGE
#17
C
G
D
A
FRONT
H1
CATCH PLATE
TO THE FRONT
Attach a Catch Plate (H8) to the
Monitor Shelf (G) as shown using
two #8x5/8" Panhead Screws (H9).
With the aid of an assistant, position the cams of the
Top (C) onto the bolts and dowels of the Left Side (A) as
shown. Turn the arrows of the cams (H1) clockwise to
secure.
Be sure the front edges are aligned.
Position one of the Backs (D) onto the Left Side
(A) and turn the arrows of the cams (H1)
clockwise to secure.
Position the Monitor Shelf (G) onto the Left Side (A).
Be sure the Front edges are aligned. Turn the
arrows of the cams (H1) clockwise to secure.

Position the other Back (D) onto the Left
Side (A) with the finished edge facing up,
and turn arrows of the cams (H1)
clockwise to secure.
#18
C
D
GD
AH1
FINISHED EDGE
With the help of an assistant, position the
bolts and dowels of Right Side (B) into the
cams of the Top (C), Both Backs (D), Monitor
Shelf (G) as shown. Turn the arrows of the
cams (H1) clockwise to secure.
#19
B
F
G
CH1
H1
H1
Position the bolts and dowels of the Bottom (E)
into the cams of the Left Side (A) and Right Side
(B) as shown. Turn the arrows of the cams (H1)
clockwise to secure.
#20
G
B
F
E
H1
FRONT
H1