Ironwood Glacier Library Furniture LFMD User manual

0920
LIBRARY FURNITURE
LFMD
FREESTANDING
MAGAZINE DISPLAY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
BY

Left Panel 07010642 1 ea.
A
Right Panel 07010642 1 ea.
B
Front Panel 07010680 1 ea.
C
Magazine
Back 07010680 4 ea.
D
Shelf Panel 07010636 5 ea.
E
Back Panel 07010657 1 ea.
F
Back
Spanner 07010660 1 ea.
G
PARTS DIAGRAM
Rafix Bolt 909925 43 ea.
H3
PARTS DIAGRAM
H1 Flush Rafix
Cam 909911 14 ea.
H2 Rafix Cam 909910 29 ea.

#1
Screw in Rafix Bolts (H3) to Right Panel (B) and Left Panel
(A).
H3
ASSEMBLE DISASSEMBLE
Using the Rafix System:
Insert the Rafix Cams into the
appropriate holes. The flat edge of
the cam should be facing the edge
of the panel.
Slide Rafix Cams of the panel to be
attached onto the corresponding posts.
Using a #3 Phillips screwdriver, turn the
rotating portion of the Rafix Cam a 1/2
turn clockwise to secure. IMPORTANT!
Do not exceed 1/2 turn when tightening
cams. Turn 1/2 turn counterclockwise
to disassemble and remove panel.
When screwing post
into hole, Do Not
over tighten. Screw
post down until
bottom face of post
flange just touches
board surface.
Flat
edges
must be
aligned

C/D
(H1)
(H3)
#2 Screw in Rafix bolt (H3) and push in Flush Rafix Cam (H1)
to Front Panel (C) and Magazine Back Panel (D).
#3 Push in Rafix Cams (H2) into Shelf Panel (E).
H3
#4
F
(H1)
Push in Flush Rafix Cams (H1) into Back Panel (F).
H2

G
(H2)
#5
#6
#7
C
E
A
(H2)
(H3)
Push in Rafix Cams (H2) into Back Spanner (g).
Attach Shelf Panel (E) to Front
Panel (C) and Magazine Back
(D). Secure in place by turning
Rafix Cams (H2).
Attach Front Panel (C)
and Shelf Panel (D) to Left
Panel (A). Secure in place
Note: Must start with
Front Panel and work
towards the back.
E(H2)
(H2)
(H2)
(H3)
(H3)
(H3)

#8
C
D
(H3)
E
E
#9
Attach Magazine Back Panel
(D) and Shelf Panel (A).
Secure by turning cams.
Repeat with the remaining 3
Magazine Back/Shelf sub
assemblies.
Attach Back Panel (F) to Left Panel (A).
Secure using Cams
F
D
D
D
D
D
A
EEEEE
#10 Attach Spanner (G) to
Left Panel (A). Secure
using cams
F
D
D
D
G
D
C
A
E
E
E
E
(H2)
(H2)

#11 Attach Right Panel (B) to unit.
Secure using Cams
B
A
CDD
EE E E
GDDF
#12 Stand upright, assembly
is complete.