Ironwood Tower Buddy User manual

0307
T-Bud
Tower Buddy
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].

PARTS DIAGRAM
C (1 ea)
Top 05831201
E (1 ea)
Bottom 05831211
P (1 ea)
Printer Shelf 05831229
D (1 ea)
Back 05831252
G (1 ea)
Divider 05831244
B (1 ea)
Right Side 05831241
A (1 ea)
Left Side 05831241
K (1 ea)
Keyboard
Shelf 05831228

H3 Minifix Bolt 909834 14 ea.
H1 Plate Caster 402050 4 ea.
H5 Minifix Cam 909810 14 ea.
H6 Varianta Screw 988060 12 ea.
H4 Wood Dowel 195000 10 ea.
Drawer Slide 490260 2 pr.
Slide Channel 490260 2 pr.
H2 Large Panhead
Screw 988056 16 ea.
H7 Small Panhead
Screw 901216 8 ea.
S4
S1
S3
S2
HARDWARE
ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.

Place the Bottom (E) on a clean, carpeted
surface with the underside facing up. Attach
four Plate Casters (H1) to the Bottom using
Large Panhead Screws (H2) in the pre-drilled
holes as shown.
#1
H2
Screw minifix bolts (H3) into the underside of
the Top (C) where indicated.
Insert Wood Dowels (H4) into the underside of
the Top where indicated.
#3
C
H3 H3
H4 H4
#2
E
H3
H4
H3
H3
H4
H4
H4
H3
H4
H3
Turn the Bottom (E) over. Screw minifix
bolts (H3) into the upper surface of the
Bottom where indicated.
Insert Wood Dowels (H4) into the upper
surface of the Bottom where indicated.
#4
Screw minifix bolts (H3) into the pre-
drilled holes of the Left Side (A) and
Right Side (B) where indicated.
Insert minifix cams (H5) facing out into
the Left Side and Right Side where
indicated.
H3
H5

#6 Attach two left 16” Slide Channels (S1) to Left Side (A) using
Varianta Screws (H6) in the pre-drilled holes as shown.
A
S1
S1
#7
BS2
Insert 2 Minifix Cams (H5) into the
pre-drilled holes of the Divider (G)
where indicated.
#5
G
H5
H5
LAST HOLE
AT END
6TH HOLE
FROM ROLLER
2ND HOLE
FROM ROLLER
H6
G
S2
Attach a right 16” Slide Channel (S2) to Right Side (B) and to
Divider (G) using Varianta Screws (H6) in the pre-drilled holes as
shown.
LAST HOLE
AT END
6TH HOLE
FROM ROLLER
2ND HOLE
FROM ROLLER
H6

C
H5
H5
#9
B
D
A
H5
Insert minifix cams (H5) into Back (D).
Position the Back (D) onto the Left
Side (A) and turn Cams clockwise to
secure in place.
#8
D
A
H5
H5
H5
H5
H5
Position the Right Side (B) onto
the Back (D) and turn Cams
clockwise to secure in place.
#10 Position the Top (C) onto the unit
and turn the Cams to secure in
place as shown.

#12
#13
E
G
H5
Place the Keyboard Shelf (K) with
pre-drilled holes facing up as shown.
Attach left and right 16” Shelf Slides
(S3 & S4) using the Small Panhead
Screws (H7) as shown.
Attach left and right 16” Shelf Slides
to the Printer Shelf (P) using the
Small Panhead Screws as shown.
Position the Bottom (E) onto the
unit as shown. Turn the Cams to
secure in place.
#11
E
3RD HOLE
FROM
ROLLER
END 3RD HOLE
FROM END
ROLLER
END
FRONT
FINISHED
EDGE H7
Position the Divider (G) onto the
posts and dowels of the Bottom (E)
and turn the Cams to secure.

#14 Slide the Printer Shelf (P) onto
the slide channels of the Left
Side (A) and the Divider (G)
as shown.
P
Your Tower Buddy is now completely assembled
and ready for use.
#15
K
Slide the Keyboard Shelf (K) onto
the slide channels of the Left Side
(A) and the Right Side (B) as
Shown.