JLL Indoor Cycling IC300 Pro User manual

IC300 PRO RESISTANCE INSTRUCTIONS
If you have any further queries please contact
our customer service team on 0121 328 7507
or email at ‘contact@jllfitness.co.uk’
1 X MULTI TOOL 5MM ALLEN KEY
TOOLS
INSTRUCTIONS
Start by removing the
screws in the casing
1
Underneath should look
like this
2
Turn the resistance all
way up
3
Loosen both bolts
either side of the
magnets
4
There will be room to
move the magnets up
and down
5
DO NOT let the magnets
rest on the flywheel!
6

Make sure there is no movement once the bolts have been tightened back up.
If the magnets touch the flywheel this can cause damage and will create a scraping sound.
Make sure the sensor cable does not get caught under the magnets.
The 5mm allen key does not come with the assembly kit however, pliers can be used instead or a 5mm
allen key can be purchased at most tool retailers.
ADVICE
Tighten the bolts back
up on either side and
replace the casing
7