JLL VENTUS 1 User manual

IMPORTANT: Please retain the instruction manual for maintenance and adjustment instructions.
Search “How to assemble JLL Ventus 1 Air Rower” on Youtube for a
step-by-step video guide on how to assemble your rowing machine.
INSTRUCTION MANUAL

1
IMPORTANT SAFETY INFORMATION
Thank you for choosing our product. To ensure your health and safety, please use this equipment
as advised. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is assembled,
maintained and used in accordance to the manual. It is your responsibility to ensure that all
users of the equipment are informed of all warnings and precautions.
1. Before starting any exercise program, you should consult a health professional to determine if
you have any medical or physical conditions that could put your health and safety at risk or
prevent you from using the equipment properly. A health professional’s advice is essential if you
are taking medication that affects your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, lightheadedness, dizziness or feelings of nausea. If you do experience any
of these conditions, you should consult a health professional before continuing with your
exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 feet (61 cm) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately. Please contact JLL Fitness on 0800
6123 988 for advice on how to resolve the issue.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 100 kg.
10. To avoid bodily injury and/or damage to the product or property, ensure to follow safe
procedures for lifting and moving the item.
11. Your product is intended for use in cool, dry conditions. You should avoid storage in extreme
cold, hot or damp areas as this may lead to corrosion and other related problems.
12. This equipment is designed for indoor home use only, it is not intended for commercial use.
Use in any environment that it is not intended for will void your warranty.

2
EXPLODED DIAGRAM
TOOLS PACK CONTENT
S6
S5 S19
S17
42
83
2
41
83
55
53
54
55
42
73
41 74
74
6
8
910
41
12
7
8
9
11
10
41
42
43
12
42
43
71
2
52
72
82
81
82
1
52
2
62
79
50
68
69
70
64
66
67
58
57
58
60
60
61
58
57
58
48
49
51
50
44
40
4746
45
5
20R
5
21
21
5
5
43
9
33
38
33
4R
5
3
1
52
2
5
4L
17
43
16
14 15
1318
19
29
30 3129
32 33
11
9
10
34
10
28
27
26
25
24
23
22
5
10
5
20L
5
5
21
21
76
56
39
76
5
35
937
11
59
59
62
63
80
AB C
43
43
75
55
55
55
2
77
73
55
83
53
53
78
14 43
56
54
54
36
60
60
65
1
52
2
1
52
2
44

3
PARTS LIST
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
1
Medium Bolt
M8*20*S6
4
31
Bearing
Φ35*d17*16
1
2
Washer
d8*Φ16*1.5
10
32
Belt Wheel
1
3
Front Stabilizer
1
33
Bearing
6000-2RS CXSH
3
4L/R
End Cap
2
34
Nut
M10*1*H3*S14
1
5
Screw
ST4.2*19*Φ8
14
35
Large Bolt
M6*55*15*S10
Grade 8.8
1
6
Fan Wheel
1
36
Mesh Belt
t1.5*22*2150
1
7
Inertial Axle
Φ10*150
1
37
Fixing Axle for Mesh
Belt
Φ10*40*Φ6.1
1
8
Washer
d10*Φ20*2
2
38
Mesh Belt Wheel
1
9
C Clip
d10
5
39
Handlebar
Φ28*1.5*440
1
10
Nut
M10*1*H5*S17
5
40
Handlebar Seat
106*40*31
1
11
Wave Washer
d10*Φ15*0.3
3
41
Adjusting Screw
M6*40*Φ10*2.5
4
12
Nut
M10*1*H8*S15
2
42
Adjusting U Seat
30*10*1.5
4
13
Spring
Φ1.0*Φ16*36*N15
1
43
Nut
M6*H6*S10
7
14
Washer
d6*Φ20*2
2
44
Screw
M5*10*Φ10
2
15
Nut
M6*H5*S10
1
45
Tension Control
Knob
1
16
Adjusting Screw
M6*60*Φ12*5
1
46
Washer
d5*Φ20*1.5
1
17
Screw
M6*30*S5
1
47
Screw
M5*25*Φ8
1
18
Mesh Belt
L455*555*B18*H1.5
1
48
Monitor
1
19
Belt
6PJ280
1
49
Main Frame
1
20L/R
Casing
2
50
Grommet
Φ12*11*Φ3
2
21
Screw
ST4.2*16*Φ8
4
51
Trunk Wire 1
1
22
Outer Cover for
Mesh Belt Wheel
Φ118.5*11.8
1
52
Spring Washer
d8
8
23
Outer PC Board for
Mesh Belt Wheel
Φ111*Φ16*0.5
1
53
Idler Wheel
Φ36*69
3
24
Volute Spring
t0.5*22*5080
1
54
Spacer
Φ8*Φ12*50
3
25
Axle for Mesh Belt
Wheel
1
55
Bearing
608RS Φ8*Φ22*12
6
26
PC Board for Mesh
Belt Wheel
1
56
Foam Grip
Φ26*3*208
2
27
Bearing
6300-2RS CXSH
1
57
Pedal
320*140*55
2
28
C Clip
d35
1
58
Large Bolt
M12
*Φ12.5*160*S19
4
29
Bearing
16003-2RS C＆U
2
59
Pedal Strap
2
30
Mesh Belt Wheel
Φ112*67.5
1
60
End Cap
F30*15*15
4

4
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
61
Rubber Pad
84.5*49.5*9.7
1
74
U Shape Baffle
2
62
End Cap
J60*30*15
2
75
Seat Support
1
63
Sensor Wire
1
76
End Cap
Φ28*15
2
64
Sleeve Bolt
Φ10*95*M6*25
1
77
Bolt
M8*100*20*S13
1
65
Washer
d10*Φ20*2
1
78
Round Magnet
Φ15 *7
1
66
Small Bolt
M6*16*S5
1
79
Sliding Rail
1
67
Pull Pin
Φ10*100*105
1
80
Grommet
Φ16
1
68
Limit Mat
1
81
Rear Stabilizer
1
69
Washer
d6*Φ12*1
1
82
End Cap
2
70
Screw
M6*30*S5
1
83
Nut
M8*H7.5*S13
3
71
Seat
360*250*50
1
A
Large Allen
Wrench
S5
1
72
Bolt
M8*16*S6
4
B
Standard Allen
Wrench
S6
1
73
Bolt
M8*90*15*S14
2
C
Spanner
S17-19
1
•DO NOT touch any moving parts during use.
•Children and pets must be kept away from machine at all times.
•Ensure pull pin is secured in place before using rower.
•Appropriate clothing MUST be worn whilst exercising.
•Please consult a doctor or health professional before undertaking any exercise
or health regime.
WARNING
Be careful not to trap connection wires when folding or unfolding rower.
WARNING

5
ASSEMBLY INSTRUCTIONS
3
1
52
2
49
S6 #B
#2 d8* 16*1.5 2PCS
#52 d8 2PCS
#1 M8*20*S6 2PCS
1
52
2
58
57
58
58
57
58
#58 M12* 12.5*160*S19 4PCS
#C
S19
49
58
57
STEP 1:
Attach the Front Stabilizer (No. 3) to the Main
Frame (No. 49) using 2 Medium Bolts (No. 1),
2 Spring Washers (No. 52) and 2 Washers
(No. 2). Tighten and secure with the Standard
Allen Wrench (#B).
STEP 2:
Attach 2 Large Bolts (No. 58) into the bottom
hole of the Main Frame (No. 49) with Spanner
(#C).
Insert 2 Large Bolts (No. 58) through the
Pedals (No. 57), into the upper hole of the Main
Frame (No.49) and tighten with Spanner (#C).
NOTE: The Pedals (No. 57) should rest on the
bottom Large Bolts (No. 58).

6
#52 d8 2PCS
#1 M8*20*S6 2PCS
#2 d8* 16*1.5 2PCS
S6 #B
1
52
2
79
81
71
79
1
2
1
52
2
S6
S5
#A #B
67
66
65
64
79
63
51
2
1
#67 10*100*105 1PC
#64 10*95*M6*25 1PC
#66 M6*16*S5 1PC
#65 d10* 20*2 1PC
63
51
49
67
STEP 4:
Attach the Sliding Rail (No. 79) to the Main
Frame (No. 49) using one Sleeve Bolt (No.
64), one Washer (No. 65) and one Small
Screw (No. 66). Tighten and secure with the
Large Allen Wrench (#A) and the Standard
Allen Wrench (#B).
Lift the Sliding Rail (No. 79) where it
connects to the Main Frame (No. 49) to align
the holes. Then insert the Pull Pin (No. 67).
Finally, connect the Trunk Wire 1 (No. 51) to
the Sensor Wire (No.63).
STEP 3:
Slide the Seat (No. 71) onto the Sliding Rail
(No. 79).
Attach the Rear Stabilizer (No. 81) to the
Sliding Rail (No. 79) using 2 Medium Bolts
(No. 1), 2 Spring Washers (No. 52) and 2
Washers (No. 2). Tighten and secure with the
Standard Allen Wrench (#B).

7
EXERCISE MONITOR
SPECIFICATIONS ___
TIME ………………………………………………………..………………….. 00:00 - 99:59 MIN:SEC
COUNT ……………………………………………………………………..….… 0 - 9999 STROKES
CALORIE …………………………………………………………………………..…….. 0 - 9999 KCAL
REPS/MIN (STROKES/MIN) ……………………………………………….. 0 - 9999 STROKES/MIN
OPERATION PROCEDURES __
MODE:
To select the function you want to display, hold the key for 4 seconds to reset all function values
(full reset).
AUTO ON/OFF:
The monitor will turn on when you start rowing or pressing MODE.
The monitor will turn off after being inactivate for 4 minutes.
FUNCTIONS _____
• TIME: Counts the workout time while exercising.
• COUNT: Counts the strokes while exercising.
• CALORIE: Counts the estimated calories burned while exercising.
• REPS/MIN: Displays the strokes per minute while exercising.
• SCAN: Scans through each function between:
① TIME
② CALORIES
③ REPS/MIN (STROKES/MIN) repeatedly.
BATTERY _____
If there is a problem with the display, try replacing the battery. This monitor uses one “AAA”
battery. Dispose the battery according to the guidelines of your local region.

8
ADJUSTMENT GUIDE
48
49
51
ADJUSTING THE PEDALS
The pedal strap length can be adjusted to fit the user’s foot size.
To tighten, pull the Velcro end of the pedal strap upward then to
the right and down to secure it to the mesh side of the strap.
MOVING THE MACHINE
To move the machine, lift up the rear stabilizer until the
transportation wheels on the front stabilizer touch the ground.
With the wheels on the ground, you can transport the rower to
the desired location with ease.
ADJUSTING THE RESISTANCE
Rotate the Tension Control Knob (No. 45) clockwise to
increase the level of resistance. Rotate the tension control
counter-clockwise to decrease the level of resistance.
Level 1 is the lowest and Level 8 is the highest tension.
45
REPLACING THE BATTERY
An “AAA” battery is included in the Monitor (No. 48). To rep lace
the battery, remove the monitor from the Main Frame (No. 49),
and disconnect the Trunk Wire (No. 51) and the link wire of the
monitor.
After the replacement, connect the Trunk Wire (No. 51) with the
link wire of the monitor and put it back into the Main Frame (No.
49)

9
ADJUSTMENT GUIDE
79
79
67
49
67
49
79
67
49
Figure B
When not in use, you can
save space by folding the
Sliding Rail (No. 79).
Lift the Sliding Rail (No.
79)where it joins the
Main Frame (No. 49).
With the other hand,
remove the Pull Pin (No.
67). (Figure A)
Fold the Sliding Rail (No.
79) to a vertical angle.
Insert the Pull Pin (No.
67) into the fixing board
and through Sliding Rail
(No. 79) to secure it in
place (Figure B).
Figure A

CONTACT INFORMATION
  0800
6123 988contactJLLfitness.co.uk
    SUPPORT.JLLFITNESS.CO.UK


WWW.JLLFITNESS.COM

 @JLLFitness