Kaba E30 User manual

Kaba E30 Quick Guide
Please read the instructions thoroughly before usage
Functions and design of the products are subject to change without prior notice
E30
●Please ensure that the installation is performed by a qualified installation professional.
●Please do not install / disassemble by yourself,or users should bear any products’
damage/danger caused by improper installation/disassembly of the products.
●Users should bear any products’ damage / malfunction caused by doors’ problems or
improper usage of the products.
●The product is not specifically designed for crime prevention purpose.Please install relative
crime prevention devices according to significant antitheft purpose.
●Please read the manuals thoroughly and keep an eye on professional installers’ procedures.
●Please familiarize yourself with key functions of the products before usage.
1Safety Regulations
To ensure your safety and prevent any damage or accident caused by inappropriate use of the
product,please read through all the instructions thoroughly before use and retain this manuals for future
reference.Children should be under guidance of an adult to ensure safety use of the product.
Caution Information which users should pay attention
to prevent any injury/damage/property loss.
Note Supplementary information on the product.
Ban Something must not be done.
Must Guideline that a user should follow.
Installation
Ban
Consult a qualified installation professional for
installation or relocation.
Must
Ensure that the gap between the door and the
doorframe is less than 5mm.(If the gap is too
wide,auto lock function will not work)
5mm
Must
Do not install the product where it is exposed
to rainwater. Rainwater may cause malfunction
of the product.

1Safety Regulations
Maintenance
Ban
Do not wash the product with water as
electronic circuit may break down in contact
with water. Wipe it with a dry cloth for cleaning.
Ban
Do not disassemble, reassemble or repair the
product by yourselves. This may cause damage
or malfunction of the product.
Battery Installation & Replacement
Must
Insert batteries properly with correct
polarities.If they are incorrectly inserted,it may
cause battery leakage or rupture and lead to
malfunction of the product,and also shorten
products lifetime.
Must
Must
Do not mix a new battery with a used one.This
may cause damage and shorten products
lifetime.
Must
When battery replacement alert is heard, please
replace as soon as possible.
2Summary of Instructions
1
Reset Administration PIN Code
1
Remove 1 battery Keep pressing “0” button
and put back the battery
2 3
Input a new admin
PIN code (6 digits)
after you hear “beeps”.
Note: Default admin PIN code is 000000
Admin PIN Code Must Be Reset With A Unique Admin PIN Code
Before Programming! Do Not Use The Default Admin PIN Code!
2
Card Key Registration
1
Input admin PIN code Press “0” and input a card
key ID (3 digits)
2 3
Swipe the card key
on the card reader
Note: 000, 001 is admin card key ID
3
Delete an Individual Card Key
1
Input admin PIN code
or swipe admin card
Press “1” button
23
Input the user ID
which needs to be
deleted
/

2Summary of Instructions
4
Delete All Card Keys
1
Input admin PIN code Press “2” button for 5 seconds
2
Caution
Please be reminded that all the
registered card keys will be deleted.
5
Passage Mode Setting
1
Passage mode will be deactivated
by switching “OFF” the passage
mode button
2
Passage mode will be activated by
switching “ON” the passage mode button
which you could find on the interior lock
assembly. (LED light flashes when
passage mode is activated)
3User Category and Rights
User Category User Quantity User Rights
Admin PIN Code 1 Card Key Management
Admin Card Key
(User ID: 000-001) 2
General Card Key 62
Unlocking, Card Key Management
Unlocking
4What`s in the Box?
No Item Quantity
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Exterior lock body
Interior lock body
Single latch / EN-mortise
Strike box (Optional)
Strike plate
Exterior shim plate
Interior shim plate
Oval head cross screws
Spindle
Mechanical keys
Lock template
Quick guide
Warranty card
Mifare cards
1
1
1
1
1
1
4
1
3
1
1
1
4
4 (E30)
5 (E30-EN)
1 (E30)
2 (E30-EN)
Countersunk head tapping
screws KA4x18 (Optional)

5Names of Parts 5Names of Parts
E30
No No
Description Description
1
2
3
4
5
6
7
Door
Single latch
Exterior shim plate
Spindle
Metric screws (KMθ7.5×M4×10)
Screws (M3×5.0)
Exterior assembly
8
9
10
11
12
13
14
Interior shim plate
Interior assembly
Screws (KMθ8.0×M5)
Battery(AA)
Battery cover
Metric screws (KMθ5.2×M3×8.0)
Screws (KMθ8.0×M5)
Outside Lock
Card Reader
Exterior Handle
Inside Lock
Battery Cover
Interior Handle
ON
OFF
Passage Mode Switch
Exploded View Drawing
E30
E30-EN
Exploded View Drawing
No No
Description Description
1
2
3
4
5
6
Door
EN. mortise
Metric screws (KMθ7.5×M4×10)
Spindle
Exterior assembly
Interior assembly
7
8
9
10
11
Screws (KMθ8.0×M5)
Battery（AA）
Battery cover
Metric screws (KMθ5.2×M3×8)
Screws (KMθ8.0×M5)
E30-EN