Keys Fitness Strength Training Equipment KF-45 User manual

Owner’s Manual KF-45
Read all precautions and
instructions in this manual before
using this equipment.
215-00093
10/06 Rev A

2
Table of Contents
Before You Start 3
Important Safety Information 4
Assembly 5-10
Parts List 11
Exploded View 12
Warranty Information 13

33
Prior to assembly, remove components from the box and verify that all the listed
parts were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with
pre-existing health problems. Keys Fitness Products LP assumes no responsibil-
ity for personal injury or property damage sustained by or through the use of
this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
SAFETY INFORMATION WARNING!
SAFETY PRECAUTIONS
• This Keys Fitness unit should only be used on a level surface and is intended
for indoor use only. Keys Fitness recommends an equipment mat be placed
under the unit to protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate
clothing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service rep-
resentative, unless authorized and/or instructed by a Keys Fitness technician.
Failure to follow these instructions will void the warranty.
Important Safety Information
NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.

44
THANK YOU for making this unit a part of your exercise program.
Keys Fitness assures the very best in value, appearance, durability
and biomechanics.
This manual will guide you through the assembly process. If at any
time you are having trouble with the assembly or use of this product, then
please contact us at our Keys Fitness Helpline. We have trained service techni-
cians on site to take care of you, our valued customer.
KEYS FITNESS SERIES
MODEL: KF-45
QUESTIONS?
CALL
1-888-340-0482
Monday-Friday
8:30-5:30 Central Time
When calling please have the following product information
available:
REGISTRATION CARD
To avoid unnecessary delays in warranty parts and to insure that a
permanent record of your purchase is on file with our company, be
sure to send in the warranty registration card or register on-line at
www.keysfitness.com within 10 days of purchase.
Model Name :
Manufactured Date :
PO # :
Model Name Decal Location
Before You Get Started

5
Assembly

66
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Connect Main Frame (2) to U Base Frame (1) by securing
with Bolts (19), Washers (23) and Nylon Nuts (22).
Make sure that the Main Frame Safety Tape is facing up
when connecting to U Base Frame (1).
STEP 1
Assembly

77
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Slide Main Upright (4) down onto Main Frame (2) and
secure with Bolts (19), Washers (23) and Nuts (22).
STEP 2
Assembly

88
STEP 3
Slide Roller Pad Tube (7) into Main Upright (3). Place
Upholstered Roller Pads (9) onto Roller Pad Tube (7) and
secure with Roller Pad Tube Caps (11).
We recommend using a rubber hammer to place Roller Pad
Tube Caps (11) onto Roller Pad Tube (7).
Insert EZ Slide Sleeves (12) into Main Upright (4).
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

99
STEP 4
Slide Telescoping Pad Support (4) into Main Upright
(3). Pull Pop Pin in order to choose different settings in
Telescoping Pad Support (4).
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

1010
STEP 5
Secure Pads (13) to Telescoping Pad Support (4) with Bolts
(20) and Washers (23).
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly